Surface Mount Wire Wound Common Mode Choke YJYCOIN YLM7060-400T for Effective EMI Noise Suppression

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Wire Wound Common Mode Choke - YLM7060 Series

The YLM7060 Series Wire Wound Common Mode Choke is designed for effective EMI noise suppression. Featuring a Surface Mount Device (SMD) construction with a low profile, these chokes offer high impedance and excellent frequency characteristics. They provide self-electromagnetic shielding and low magnetic flux leakage, making them ideal for applications such as LED lighting, TV games, and monitors to reduce common-mode noise.

Product Attributes

Brand: YJY ()
Origin: Shenzhen, China
Material List: Core (Ferrite), Wire (2UEW P180), Base (LCP), Solder (Sn Cu), Epoxy (ME-5890), Ink (White BON MARK)

Technical Specifications

Type	Dimensions (mm) A	Dimensions (mm) B	Dimensions (mm) C Max	Dimensions (mm) D Typ	Dimensions (mm) E	Dimensions (mm) F	Dimensions (mm) G	Inductance Value ( @100MHz/0.1V) Min	Inductance Value ( @100MHz/0.1V) Typ	DC Resistance (m) Max	Rated Current (A) Max	Rated Volt. (V) Max	Marking
YLM7060	7.00.5	6.00.5	3.8	3.5	1.50.5	1.50.5	1.70.5	40	70	5	10	125	400
YLM7060-101T	7.00.5	6.00.5	3.8	3.5	1.50.5	1.50.5	1.70.5	100	140	10	9.0	125	101
YLM7060-301T	7.00.5	6.00.5	3.8	3.5	1.50.5	1.50.5	1.70.5	225	300	10	5.0	125	301
YLM7060-501T	7.00.5	6.00.5	3.8	3.5	1.50.5	1.50.5	1.70.5	275	350	10	5.0	125	501
YLM7060-601T	7.00.5	6.00.5	3.8	3.5	1.50.5	1.50.5	1.70.5	500	700	15	4.0	125	601
YLM7060-701T	7.00.5	6.00.5	3.8	3.5	1.50.5	1.50.5	1.70.5	500	700	15	4.0	125	701
YLM7060-102T	7.00.5	6.00.5	3.8	3.5	1.50.5	1.50.5	1.70.5	800	1020	17	3.0	125	102
YLM7060-132T	7.00.5	6.00.5	3.8	3.5	1.50.5	1.50.5	1.70.5	910	1300	21	2.5	125	132
YLM7060-272T	7.00.5	6.00.5	3.8	3.5	1.50.5	1.50.5	1.70.5	2000	2700	63	1.0	125	272
YLM7060-302T	7.00.5	6.00.5	3.8	3.5	1.50.5	1.50.5	1.70.5	2500	3000	75	0.9	125	302

Reliability Testing

Operating Temperature: -30 to +100 (Including Heating coil)
Appearance Inspection: No external defects by visual inspection.
Terminal Strength: After soldering, terminals should not peel off when subjected to 10N (1.02kg) force in X and Y directions for 102 seconds.
Heat endurance of reflow soldering: Refer to figure.
Insulating resistance: Over 100 M at 100V D.C. between wire and core.
Dielectric Strength: Apply 0.5KV at 3mA for 1 minute between wire and core.
Temperature characteristics: Inductance coefficient (0~2,000) 10 / (-30 ~ +100 ).
Humidity characteristics: Inductance deviation within 10% after 96 hours in 90~95% relative humidity at 40 2 and 1 hour drying under normal condition.