Effective power line noise filter YJYCOIN YLM4015A-601T wire wound common mode choke for electronics

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The YLM4015 Series Wire Wound Common Mode Choke is a compact and highly effective filter designed for noise suppression. It features high common mode impedance in the noise band and low differential mode impedance in the signal band, ensuring minimal distortion for high-speed signal transmission. This choke is suitable for various DC power line noise suppression applications, including Switch Mode Power Supplies, Variable Frequency Drives, and AC/DC power rectifiers.

Product Attributes

Brand: YJYcoin
Origin: Shenzhen
Operating Temperature: -40 to +125

Technical Specifications

Part Number	Impedance () at 10MHz 40%	Common Mode Impedance () at 100MHz Typ.	DCR () Max.	DC Current (A) Typ.	Rated Voltage (Vdc) Typ.	Insulation Resistance (M) Min.	Withstand Voltage (Vdc) Typ.
YLM4015A-101T	10	100	0.016	3.1	60	10	150
YLM4015A-251T	25	250	0.024	2.6	60	10	150
YLM4015A-401T	38	400	0.030	2.1	60	10	150
YLM4015A-501T	50	500	0.030	2.1	60	10	150
YLM4015A-601T	53	600	0.030	2.0	60	10	150
YLM4015A-851T	65	850	0.040	1.9	60	10	150
YLM4015A-102T	65	1000	0.040	2.0	60	10	150
YLM4015A-172T	100	1700	0.060	1.5	60	10	150
YLM4015A-242T	120	2400	0.075	1.4	60	10	150
YLM4015A-302T	180	2200	0.120	1.1	60	10	150

Item	Specifications	Test Method
Appearance and Dimensions	Style and Dimensions	Visual Inspection and Measured with Slide Calipers.
Bonding Strength and Core Strength	No Evidence of Chipping, Breakage. No Evidence of Coming off Glass-Epoxy Substrate.	Applying Force (F): 10N Applying Time: 5 1s
Body Strength	No Evidence of Chipping, Breakage.	Applying Force (F): 10N Applying Time: 5 1s
Vibration	Products Shall be Soldered on the Substrate. Oscillation Frequency: 10 to 55 to 10Hz for 1 Min. Total Amplitude: 1.5mm Testing Time: A Period of 2 Hours in Each of 3 Mutually Perpendicular Directions (Total 6 Hours).
Drop	Products Shall be Dropped Concrete or Steel Board. Height: 1m The Number of Times: 10 Times	Method: Free Fall
Solderability	The electrodes Shall be at Least 90% Covered with New Solder coating.	Flux: Ethanol Solution of Rosin, 25 (wt)% Pre-Heating: 150 10, 1 Minute. Solder: (1) Su/Pb=60/40, (2) Su-3.0Ag-0.5Cu Solder Temperature: (1) 2305, (2) 2305 Immersion Time: 4 1s Immersion and Immersion Rates: 25mm/s
Resistance to Soldering Heat	Meet Table 1.	Flux: Ethanol Solution of Rosin, 25 (wt)% Pre-Heating: 150 10, 1 Minute. Solder: (1) Su/Pb=60/40, (2) Su-3.0Ag-0.5Cu Solder Temperature: 2705 Immersion Time: 5 1s Immersion and Immersion Rates: 25mm/s Then Measured After Exposure in the Room Condition for 4 to 48 Hours.
Temperature Cycle	1 Cycle 1 step: -40 (+0, -3) / 30min (+3, -0) min 2 step: Ordinary Temp. / 3 min max. 3 step: +125 (+3, -0) / 30min (+3, -0) min 4 step: Ordinary Temp. / 3 min max. Total of 10 Cycles Then Measured After Exposure in the Room Condition for 4 to 48 Hours.
Humidity	Temperature: 402 Humidity: 90 to 95% (RH) Time: 1000h (+48 h, -0 h) Then Measured After Exposure in the Room Condition for 4 to 48 Hours.
Humidity Load	Temperature: 402 Humidity: 90 to 95% (RH) Test Voltage: Rated Voltage Time: 1000h (+48 h, -0 h) Then Measured After Exposure in the Room Condition for 4 to 48 Hours. (Ref. Item)
Heat Life	Temperature: 852 Humidity: 90 to 95% (RH) Test Voltage: Rated Voltage Time: 1000h (+48 h, -0 h) Then Measured After Exposure in the Room Condition for 4 to 48 Hours. (Ref. Item)
Cold Resistance	Temperature: 402 Time: 1000h (+48 h, -0 h) Then Measured After Exposure in the Room Condition for 4 to 48 Hours. (Ref. Item)