Wire Wound Common Mode Choke YJYCOIN YLM7060-501T Designed for Low Magnetic Flux Leakage and EMI Filtering

Wire Wound Common Mode Choke - YLM7060 Series

The YLM7060 Series is a wire wound common mode choke designed for SMD construction with a low profile. It offers high impedance, excellent frequency characteristics, self-electromagnetic shielding, and low magnetic flux leakage. This series is ideal for applications such as LED lighting, TV games, and monitors, effectively mitigating EMI common-mode noise.

Product Attributes

• Brand: YLM7060 Series
• Origin: (Shenzhen Yijia Yuan Electronics Co., Ltd.)
• Material List: Core (Ferrite), Wire (2UEW P180), Base (LCP), Solder (Sn Cu), Epoxy (ME-5890), Ink (White BON MARK)

Technical Specifications

Dimensions

Taping Dimensions

Reel Dimensions

Reliability Testing

• Operating Temperature: -30 to +100 (Contain Heating coil)
• Appearance Inspection: No external defects by visual inspection.
• Terminal Strength: After soldering, push in two directions of X, Y with standing 10N (1.02kg) for 102 sec. Terminals should not peel off.
• Heat endurance of reflow soldering: Refer to figure.
• Insulating resistance: Over 100 M at 100V D.C. between wire and core.
• Dielectric Strength: Apply at 0.5KV 3mA for 1 minute between wire and core.
• Temperature characteristics: Inductance coefficient (0~2,000) 10/ (-30 ~ +100 ).
• Humidity characteristics: Inductance deviation within 10%, after 96 hours in 90~95% relative humidity at 402 and 1 hours drying under normal condition.

Cover Tape Peel Off Condition

• Cover tape peel force shall be 0.1N to 1.3N.
• Reference peel speed 30010mm/min.