YJYCOIN YLCM1006C 101T wire wound common mode choke with high impedance and low magnetic flux leakage

Wire Wound Common Mode Choke - YLCM1006C Series

The YLCM1006C Series is a wire wound common mode choke featuring SMD construction and a low profile. It offers high impedance, excellent frequency characteristics, self-electromagnetic shielding, and low magnetic flux leakage. This series is designed for EMI common-mode noise suppression in applications such as LED lighting, TV games, and monitors.

Product Attributes

• Brand: YJYcoin ()
• Origin: Shenzhen, China

Technical Specifications

Material List

Operating Conditions

• Rated Current: Temp. rise 40 Typ
• Operating Temperature: -20 up to +125
• Storage Temperature: -20 up to +40, 75% RH max.

Reliability Testing

• Operating Temperature: -20 to +125 (Contain Heating coil)
• Appearance Inspection: No external defects by visual inspection
• Terminal Strength: After soldering, between copper plate and terminals of coils, push in two directions of X, Y with standing 10N(1.02kg) for 10+/-2 sec. Terminals should not peel off.
• Heat endurance of reflow soldering: Refer to figure
• Insulating resistance: Over 100 M at 100V D.C. between wire and core.
• Dielectric Strength: Apply at 0.5KV 3mA for 1 minute between wire and core.
• Temperature characteristics: Inductance coefficient (0~2,000) 10 / (-20 ~ +125 )
• Humidity characteristics: Inductance deviation within 10%, after 96 hours in 90~95% relative humidity at 40 2 and 1 hours drying under normal condition. A test is made under the above mentioned condition, and it is kept for 2 hours in the normal temperature and humidity. After that, no mechanical and electrical defect should be found.

Taping Dimensions

Reel Dimensions

Cover Tape Peel Off Condition

Cover tape peel force shall be 0.1N to 1.3N. Reference peel speed 30010mm/min.