Metal Alloy Resistor Yohey YHR2512SE3WR025F4 Series 2512 Size 3W 4W Power RoHS Compliant
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
YHR-2512 series metal alloy resistors are designed for high-performance applications, complying with RoHS requirements and undergoing AEC-Q200 vehicle-specific testing. They feature low parasitic inductance ( 5nH) and are available in LE (large electrode) and SE (small electrode) types with various power ratings and resistance tolerances.
Product Attributes
- Brand: YH ()
- Origin: China
- Certifications: RoHS, AEC-Q200
- Material: Copper, Manganese Copper (MnCu), Copper Nickel (CuNi), Kama
- Color: Not specified
Technical Specifications
| Type | Product Type | Resistor Size | Power | Resistance Tolerance | Resistance Range | Material | TCR | Operating Temperature Range | Insulation Resistance | Max Operating Voltage |
| LE | Metal Alloy Resistance 2512 Series | 2512 | 3W/4W | F: 1%, G: 2%, J: 5% | <0.45m R000, R0005RR004 | Purple Copper (for R | 350ppm/ (for 0.5mR | -55~ +170 | Over 100M | (P*R) |
| SE | Metal Alloy Resistance 2512 Series | 2512 | 3W/4W | F: 1%, G: 2%, J: 5% | R001RR020 | MnCu (for 1mR1.5m) | 350ppm/ (for 1mR1.5m) | -55~ +170 | Over 100M | (P*R) |
| SE | Metal Alloy Resistance 2512 Series | 2512 | 2W/3W | F: 1%, G: 2%, J: 5% | R001RR220 | MnCu (for 2mR20m, 20m| 50 ppm/ (for 2mR20m, 20m | -55~ +170 | Over 100M | (P*R) | |
| SE | Metal Alloy Resistance 2512 Series | 2512 | 2W | F: 1%, G: 2%, J: 5% | R220RR500 | CuNi (for 150m| 50 ppm/ (for 150m | -55~ +170 | Over 100M | (P*R) | |
Reliability Tests
| Project | Test Method | Specifications and Requirements |
| Temperature coefficient (TCR) | Resistance values were measured at 25(T1, R1) and 125(T2, R2), and TCR was calculated as (R2-R1)/ (R1 (T2-T1)) *10^6 | Refer to TCR specifications for physical features |
| ShortTimeOverload | 5 times rated power, maintain 5s (R000, max current 200A) | R1%+0.05m |
| Insulation resistance | Apply 100V15V DC voltage between electrode and substrate, hold for 60 seconds, then measure insulation resistance | > 100 M |
| Withstand voltage | An alternating current with an effective value of the maximum overload voltage is applied between the electrode and the substrate at a rate of approximately 100V/S, maintaining 605s | No breakdown or arc |
| Soldering | 2455 tin tank, hold 2s0.5s | At least 95% of surface area of electrode shall be covered with new solder |
| Resistance to Soldering Heat | 2705 tin tank, hold for 10s1s | R (0.5%+0.05m), no visible damage |
| Bending test | Bending distance 2mm, hold time 60s5s | R0.5%+0.05m, no mechanical damage |
| Solvent resistance | Isopropanol (IPA) at 235 for 10 hours | No obvious damage to appearance |
| High Temperature Exposure | 1702, 1000H, stand for 1H, test the resistance value | R (1.0%+0.05m) |
| Low Temperature Exposure | -552, 1000H, stand for 1H, test the resistance value | R (0.5%+0.05m) |
| Rapid change of Temperature | -55 30 minutes ~ normal temperature 5 minutes ~155 30 minutes, 1000 cycles | R (0.5%+0.05m) |
| Load Life | 702, 1000 hours, rated power, 1.5 hours on / 0.5 hours off | R (1.0%+0.05m) |
| Moisture with Load | 852, 85%3%RH, 1000 hours, rated power, 1.5 hours on / 0.5 hours off | R (1.0%+0.05m) |
Packaging and Handling
Tape Packing Dimensions
| A | B | W | F | E | P1 | P2 | P0 | D0 | t |
| 3.50.15 | 6.80.1 | 12.00.2 | 5.50.05 | 1.750.1 | 4.00.1 | 2.00.05 | 4.00.05 | 1.5~1.6 | 1.00.1 |
Reel Dimensions
| Type | A | B | C | D | E | T | W |
| Reel | 1782.0 | 601.0 | 131.0 | 2.00.5 | >22 | 15.40.5 | 13.30.5 |
Pad Pattern
| Size | SE(short electrode) | LE(large electrode) |
| A | 4.0 | 3.1 |
| B | 2.1 | 1.3 |
| L | 4.1 | N/A |
Belt Tension
Not specified
Matters Needing Attention
- Chip resistor shall be stored in a room where temperature and humidity must be controlled (temperature 5 to 35, humidity 45 to 75% RH). However, keep humidity as low as possible.
- Chip resistor shall be stored away from direct sunlight.
- Chip resistor shall be stored with no moisture, dust, materials that will make solder ability inferior, and harmful gases (Hydrogen chloride, sulfurous acid gas, and Hydrogen sulfide).
- Storage life: 1 year.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina