Metal Alloy Resistor Solutions Featuring Yohey YHR2512SE2WR020F4 With Low Parasitic Inductance And RoHS
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The Yuanhui Electronics Technology (Jiangsu) Co., Ltd. 2512 Alloy Resistance series offers high-performance metal alloy resistors compliant with RoHS requirements and vehicle-specific AEC-Q200 tests. These resistors feature parasitic inductance less than or equal to 5 nH and are available in LE (large electrode) and SE (small electrode) types, with various power ratings, resistance tolerances, and resistance ranges.
Product Attributes
- Brand: YHR
- Origin: Yuanhui Electronics Technology (Jiangsu) Co., Ltd.
- Certifications: RoHS, AEC-Q200
- Material: MnCu, CuNi, Kama (depending on resistance range and type)
Technical Specifications
| Type | Product Type | Resistor Size | Power | Resistance Tolerance | Resistance Range | Material | TCR | Operating Temperature Range | Insulation Resistance | Maximum Operating Voltage (V) |
| LE | Metal Alloy Resistance 2512 Series | 2512 | 3W/4W | F: 1%, G: 2%, J: 5% | 0.45m R000, 0.5mR4m | MnCu | 350ppm/ (for R | -55~ +170 | Over 100M | (P*R) |
| SE | Metal Alloy Resistance 2512 Series | 2512 | 2W/3W/4W | F: 1%, G: 2%, J: 5% | 0.2m R | MnCu (for R220m), CuNi (for 220m| 350ppm/ (for 1mR1.5m), 50 ppm/ (for 2mR220m), 50 ppm/ (for 220m | -55~ +170 | Over 100M | (P*R) | |
Construction and Dimension
| Product Type | Illustration | Size (L x W x E x H) | Legend |
| 2512 LE |  | 6.40.2 x 3.20.2 x 2.20.2 x 0.80.08 | L, W, E, H |
| 2512 SE |  | 6.40.2 x 3.20.2 x 1.00.2 x 0.80.08 | L, W, E, H |
Reliability Tests
| Project | Test Method (Refer to IEC 60115, 60068; JIS-C 5201-1) | Specifications and Requirements |
| Temperature coefficient (TCR) | Resistance values were measured at 25(T1, R1) and 125(T2, R2), and TCR was calculated as (R2-R1)/(R1(T2-T1))*10^6 | Refer to TCR specifications for physical features |
| Short Time Overload | 5 times rated power, maintain 5s (R000, max current 200A) | R(1%+0.05m) |
| Insulation resistance | Apply 100V15V DC voltage between electrode and substrate, hold for 60 seconds, then measure insulation resistance | > 100 M |
| Withstand voltage | An alternating current with an effective value of the maximum overload voltage is applied between the electrode and the substrate at a rate of approximately 100V/S, maintaining 605s | No breakdown or arc |
| Solderability | 2455 tin tank, hold 2s0.5s | At least 95% of surface area of electrode shall be covered with new solder |
| Resistance to Soldering Heat | 2705 tin tank, hold for 10s1s | R(0.5%+0.05m), no visible damage |
| Bending test | Bending distance 2mm, hold time 60s5s | R(0.5%+0.05m), no mechanical damage |
| Solvent resistance | Isopropanol (IPA) at 235 for 10 hours | No obvious damage to appearance |
| High Temperature Exposure | 1702, 1000H, stand for 1H, test the resistance value | R (1.0%+0.05m) |
| Low Temperature Exposure | -552, 1000H, stand for 1H, test the resistance value | R (0.5%+0.05m) |
| Rapid change of Temperature | -55 30 minutes ~ normal temperature 5 minutes ~155 30 minutes, 1000 cycles | R (0.5%+0.05m) |
| Load Life | 702, 1000 hours, rated power, 1.5 hours on / 0.5 hours off | R (1.0%+0.05m) |
| Moisture with Load | 852, 85%3%RH, 1000 hours, rated power, 1.5 hours on / 0.5 hours off | R(1.0%+0.05m) |
Tape Packing Dimensions
| A | B | W | F | E | P1 | P2 | P0 | D0 | t |
| 3.50.15 | 6.80.1 | 12.00.2 | 5.50.05 | 1.750.1 | 4.00.1 | 2.00.05 | 4.00.05 | 1.5~1.6 | 1.00.1 |
Reel Dimensions
| Type | A | B | C | D | E | T | W |
| Reel | 1782.0 | 601.0 | 131.0 | 2.00.5 | >22 | 15.40.5 | 13.30.5 |
Pad Size
| Size | SE(short electrode) | LE(long electrode) |
| A | 4.0 | 3.1 |
| B | 2.1 | 1.3 |
Matters Needing Attention
- Chip resistors shall be stored in a room where temperature and humidity must be controlled (temperature 5 to 35, humidity 45 to 75% RH). However, humidity should be kept as low as possible.
- Chip resistors shall be stored such that direct sunlight does not hit them.
- Chip resistors shall not be stored in environments with moisture, dust, or harmful gases (Hydrogen chloride, sulfurous acid gas, and Hydrogen sulfide) that will make solderability inferior.
- Storage life: 1 year.
Version History
| Version | Date | Description of amendment |
| A1 | 2022/12/5 | Initial release |
| A2 | 2023/01/05 | Updated resistance segment R100-R220 |
| A3 | 2023/02/03 | Modified packaging quantity |
| A4 | 2023/05/06 | Updated resistance segment range R220-R500 |
| A5 | 2024/01/23 | Updated resistance power |
| A6 | 2024/12/02 | Updated parasitic inductance range |
| A7 | 2025/02/26 | Updated internal structure diagram |
| A8 | 2025/04/15 | Updated main material name explanation corresponding to resistance segment paragraphs |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina