Ferrite Chip EMI Suppressors ZE ZECB321609A400-4A000 SMD Chip Beads RoHS Compliant Pb Free Components
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Ferrite Chip EMI Suppressors - BCMS3216 Series
This specification applies to the BCMS3216 series Ferrite Chip EMI suppressors. These components are designed to suppress electromagnetic interference (EMI) in electronic circuits.
Product Attributes
- Brand: (Zengyi)
- Origin: Taichung, Taiwan
- Material: Ferrite
- Type: (SMD Chip Beads)
- Certifications: RoHS Compliant, Pb Free
Technical Specifications
| Part Number | Impedance () at 100 MHz, 500mV | DC Resistance () Max | Rated Current (mA) Max | Operating Temp. Range | Storage Temp. Range | Dimensions (L x W x T) (mm) |
| BCMS321609A400 | 4025% | 0.006 | 6000 | -55 ~ +125 | -10 ~ +40 | 3.20.2 x 1.60.2 x 0.90.2 |
Reflow Soldering Conditions
Pre-heating: Temperature difference between solder and ferrite surface limited to 150 max. Cooling into solvent after soldering limited to 100 max.
Temperature Profile:
- Slope of temp. rise: 1 to 5 /sec
- Heat time: 50 to 150 sec
- Heat temperature: 120 to 180
- Time over 230: 90~120 sec
- Peak temperature: 255~260
- Peak hold time: 10 max. sec
- No. of mounting: 3 times
Reworking with soldering iron: Preheating 150, 1 minute; Tip temperature 280 max; Soldering time 3 seconds max; Soldering iron output 30w max; End of soldering iron 3mm max. Reworking limited to one time.
Equipment for Measurement
- Impedance: HP-4286A impedance analyzer or equivalent
- DC Resistance: HP 4338 digital mili-ohm meter with 4 terminal method
Mechanical Characteristics
| Item | Specification | Test Conditions |
| Terminal Strength | Impedance shall be satisfied 30% for 10 sec. DC resistance shall be satisfied. | Solder chip on PCB and applied 10N (1.02Kgf) |
| Substrate Bending | Impedance shall be satisfied 30%. DC resistance shall be satisfied. | After soldering a chip to a test substrate, bend the substrate by 3mm hold for 10s and then return. Soldering in accordance with recommended PC board pattern and reflow soldering. |
| Resistance to Solder Heat | No visible damage. Electrical characteristics and mechanical characteristics shall be satisfied. | Solder Temp.: 2653; Immersion time: 61 sec; Preheating: 100 to 150, 1 minute. Measurement after keeping at room temp for 242 hrs. |
| Solderability | 95% min. coverage of all metallised area. | Solder temp.: 2405; Immersion time: 31 sec. Consult standard J-STD-002. |
Reliability and Test Conditions
| Test Item | Performance Specification | Test Condition |
| High Temperature Resistance | Appearance: no mechanical damage. Impedance: 30% of initial value. DC resistance: satisfied. | Temperature: 1252; Applied current: Rated current; Testing time: 100812hrs; Measurement: After 24 hours at room ambient temp. |
| Humidity Resistance | Appearance: no mechanical damage. Impedance: 30% of initial value. DC resistance: satisfied. | Humidity: 90 to 95% RH; Temperature: 602; Applied current: Rated current; Testing time: 100812hours; Measurement: After 24 hours at room ambient temp. |
| Temperature Cycle | Appearance: no mechanical damage. Impedance: 30% of initial value. DC resistance: satisfied. | -55,+125 stabilized for 30 min each; 100 cycles. Measurement: After 24 hours at room ambient temp. Steps: -55 (303 min), Standard conditions (5s), +125 (303 min), Standard conditions (5s). |
| Low Temperature Storage Life Test | Appearance: no mechanical damage. Impedance: 30% of initial value. DC resistance: satisfied. | Temperature: -552; Testing time: 100812hours; Measurement: After 24 hours at room ambient temp. |
| Thermal Shock | Appearance: no mechanical damage. Impedance: 30% of initial value. | -55,+125 stabilized for 30 min each; 100 cycles. Measurement: After 24 hours at room ambient temp. |
| Vibration Test | Appearance: no mechanical damage. Impedance: 30% of initial value. | Waveform: Sine wave; Frequency: 10~55~10 Hz; Sweep time: 1min; Amplitude: 1.5mm(peak-peak); Direction: X,Y,Z (3 axes); Duration: 2 hrs./axis, total 6 hrs. |
Embossed Carrier Tape Packaging
| Dimension | A0 | B0 | W | F | E | P1 | P2 | P0 | D0 | D1 | K | T | T2 |
| Value (mm) | 1.880.1 | 3.50.1 | 8.00.2 | 3.50.05 | 1.750.1 | 4.00.1 | 2.000.05 | 4.00.1 | 1.550.05 | 1.00.1 | 1.270.1 | 0.230.1 | 1.270.1 |
Leader and Trailer Tape: Specified.
Reels Packing Qty: 4,000 PCS/REEL
Peeling Strength of Cover Tape: 10g~100g (Test condition: peel angle 165~180, peel speed 300mm/min)
Packaging
- Tape & Reel packaging
- Reel and a bag of desiccant in a Nylon or plastic bag
- Max. 5 bags per inner box
- Max. 6 inner boxes per outer box
Storage
- Store at 40 or less and 70% RH or less.
- Avoid dust or harmful gas (hydrogen chloride, sulfurous acid gas or hydrogen sulfide).
- Avoid heat or direct sunlight.
- Minimum packages shall not be opened until just before use.
- Solderability is guaranteed for 6 months from the date of delivery under specified storage conditions.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina