Electrical Specifications and Dimensions of ZE ZECB160808A301-1A500 Multilayer Ceramic Bead Component

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This document details the specifications for the GZ1608-301TF multilayer ceramic bead from Dongguan Zengyi Industrial Co., Ltd. It covers dimensions, electrical characteristics, testing procedures, soldering conditions, packaging, and reliability tests.

Product Attributes

Brand: Zengyi ()
Origin: Dongguan, China
Material Type: Multilayer Ceramic Bead ()

Technical Specifications

Item	Specification	Details
Model	GZ1608-301TF
Dimensions (mm)	L	1.6 0.2
	W	0.8 0.2
	T	0.8 0.2
	A	0.3 0.3
Electrical Characteristics (@ 25)	Impedance (Z)	300 25% (Measured with HP4286A 502BC at 100 MHz)
	DCR (DC Resistance)	0.1 MAX (Measured with VR116 60 MV/100 MHz)
	Irms (Rated Current)	2000mA MAX
Reflow Soldering Conditions	Pre-heating	Temperature difference 150 (solder to ferrite surface)
	Cooling	Temperature difference 100 (after soldering into solvent)
	Temperature Profile	A: Slope 1-5/sec, B: Heat time 50-150 sec, Heat temp 120-180, C: Slope 1-5/sec, D: Time over 230 90-120 sec, E: Peak temp 255-260, Peak hold time 10 sec
	No. of mounting	3 times
Reworking with Soldering Iron	Preheating	150, 1 minute
	Tip Temperature	280 MAX
	Soldering Time	3 seconds MAX
	Soldering Iron Output	30W MAX
	Tip Diameter	3mm MAX
	Rework Limit	1 time
Packaging	Tape Type	7"x8mm, 7"x12mm
Storage Conditions	Temperature	-10 ~ 40
	Humidity	30 ~ 70% RH
	Shelf Life	Recommended use within 6 months from delivery
Reliability Test - High Temp Resistance	Temperature	125 2
	Applied Current	Rated current (maximum value)
	Testing Time	1008 12 hrs
Reliability Test - Humidity Resistance	Humidity	90 to 95% RH
	Temperature	60 2
	Testing Time	1008 12 hours
Reliability Test - Temperature Cycle	Temperature	-55, +125 (stabilized 30 min each)
	Cycles	100 cycles
Reliability Test - Low Temp Storage Life	Temperature	-55 2
	Testing Time	1008 12 hours
Reliability Test - Thermal Shock	Temperature	-55, +125 (stabilized 30 min each)
	Cycles	100 cycles
Reliability Test - Vibration Test	Waveform	Sine wave
	Frequency	10~55~10 Hz
	Amplitude	1.5mm (peak-peak)
	Direction	X, Y, Z (3 axes)
	Duration	2 hrs/axis, total 6 hrs