High Precision Amphenol PS4-H2-1000 Electrochemical Sensor with Solid Polymer Electrolyte Technology
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The SGX series of PS1 and PS4 Electrochemical gas sensors utilize a revolutionary 'Solid Polymer Electrolyte' technology based on catalytic reaction principles. These sensors generate a small current proportional to the target gas concentration, offering a stable, high-quality, and cost-effective manufacturing process. They are characterized by their very small size, high sensitivity, low power consumption, and minimal cross-sensitivity to other gases. Key applications include ambient monitoring, sensitive leak detection, battery production, semiconductor manufacturing, data center protection, and propellant detection.
Product Attributes
- Brand: SGX
- Technology: Solid Polymer Electrolyte (SPE)
- Operating Principle: Amperometric, 3-electrode
- Housing Material: PPO
- Origin: Poland (SGX Europe Sp. z o.o.)
- Warranty: 12 months
- Expected Lifetime: > 5 years in air
Technical Specifications
| Model | PS1-H2-1000 | PS4-H2-1000 |
|---|---|---|
| Sensitivity | 11 ± 3 nA / ppm | |
| Measurement Range | 0 1000 ppm | |
| Zero Current | ± 100 nA | |
| Maximum Overload | 2000 ppm | |
| Response Time | T50 < 10s, T90 < 30s | |
| Repeatability | 1% | |
| Lower Detectable Limit (LDL) | ≤ 2 ppm | |
| Linear Range | 1000 ppm | |
| Resolution (16Bit ADC) | 0.1ppm | |
| Operating Humidity Range | 15-95% RH | |
| Pressure Range | 800 to 1200 hPA | |
| Storage Temperature | 0 to 20°C | |
| Temperature Range | -40°C to +55°C | |
| Recommended Load Resistor | 100 Ω | |
| Bias Voltage | 0 mV | |
| Warm Up Time | < 60 s | |
| Long-Term Drift | < 1 %/month | |
| Zero Drift in Clean Air | < 10 ppm | |
| Storage Life | 12 months | |
| Weight | < 0.7g | < 6g |
Important Notes
- All performance is based on conditions at 20°C, 50% RH and 1 atm, flow rate>150qcm/min, using SGX recommended circuitry.
- Sensor performance is temperature dependent; please contact SGX for temperature performance other than 20°C.
- Do not solder to the connector pins as this may damage the sensor and thereby invalidate the warranty.
- Details on recommended connector pins can be found in the Frequently Asked Questions within the Gas Sensor section of the SGX website.
- The cross-sensitivity factors may vary due to different sensors and service life; please refer to the actual test results.
- The cross-sensitivity table is not complete for all gases; for other gases, please contact SGX.
- Exposure to high concentrations of solvent vapours should be avoided during storage, fitting, and operation.
- When using sensors on printed circuit boards (PCBs), degreasing agents should be used prior to the sensor being fitted.
- For applications where life safety is a performance requirement, it is recommended that all sensors and instruments using these sensors are checked for response to gas before use.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Changsha Purple Horn E-Commerce Co., Ltd.
Location
2332 Kaibin Commercial Plaza, No. 419 Shaoshan Middle Road, Shazitang Street, Yuhua District, Changsha City, Hunan Province
Contact Person
Coral