SPI digital rotary angle sensor Amphenol PST360G2-2AA-C0123-ERA040-05K with 360 ERA measurement capability

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The PST-360 is a sensor featuring a digital Serial Peripheral Interface (SPI) protocol, designed to operate as a slave node. It provides angle measurement data continuously calculated by the slave, which is then held for the master to read. The device supports a 360 ERA (Electronic Rotary Angle) measurement with a resolution indicated by the rotor size. It is suitable for applications requiring precise angular positioning and digital communication.

Product Attributes

Brand: Piher Sensors & Controls SA
Company Affiliation: AmphenolTM company
Origin: Spain
Protocol: SPI Protocol (Simple - SPI Protocol)
Output Function: Curve 0000

Technical Specifications

Specification	Value	Details
Model	PST360G2-1S-C0000-ERA360-05K
Rotor	14mm
Supply Voltage (Vdd)	5V 10%
Temperature Range	-40 C to +125 C
Signal Output Type	Digital	SPI Protocol (360 ERA)
SPI Pins	/SS, SCLK, MOSI-MISO	All 5V tolerant digital inputs/outputs. MOSI-MISO is open drain.
Slave Start-Up Time		Time within which /SS and SCLK are ignored. First frame can be sent after 16 ms.
Slave Reset Time	1 second (after internal soft failures)
Data Frame Structure	10 bytes	2 start bytes (AAh, FFh), 2 data bytes (DATA16), 2 inverted data bytes (/DATA16), 4 all-Hi bytes.
Timing (Slow Mode, 7MHz Oscillator)	t1: 6.9 s (Min)	Minimum clock period for any bits within a byte.
	t2: 37.5 s (Min)	Minimum time between any other byte.
	t4: 6.9 s (Min)	Minimum time between /SS=Lo and the first clock edge.
	t5: 1500 s (Min)	Minimum time between reset-inactive and any master signal change.
	t5: 0 ms (Min)	Maximum /SS=Hi time where NO frame re-synchronizations will be started.
	t6: 6.9 s (Min)
	t7: 45 s (Min)	Minimum time between StartByte and Byte0.
	t9:	Time between last clock and /SS=high=chip de-selection.
Error Handling	ROM CRC error, EEPROM CRC error, RAM check error, intelligent watchdog error	Slave serial protocol is not initialized. MOSI/MISO remains Hi-impedant.