Accurate Stable Digital Pressure Sensor Amphenol DLHR-L01D-E1BD-C-NAV8 with Parylene Coating Option
DLHR Series Low Voltage Digital Pressure Sensors
Product Overview
The All Sensors DLHR Series Mini Digital Output Sensor leverages CoBeam2TM Technology to offer enhanced long-term stability and reduced susceptibility to package stress and position sensitivity. Featuring a digital interface for seamless integration into process control and measurement systems, these sensors can connect directly to serial communication channels. Designed for battery-powered applications, they offer a very low-power mode between readings to minimize power consumption. These calibrated and compensated sensors deliver accurate, stable output across a wide temperature range and are intended for use with non-corrosive, non-ionic working fluids like air and dry gases. An optional parylene coating is available for added protection against moisture and harsh media. The DLHR series is ideal for applications including Medical Breathing, Environmental Controls, HVAC, Industrial Controls, and Portable/Hand-Held Equipment.
Product Attributes
- Brand: All Sensors
- Technology: CoBeam2TM Technology
- Interface Options: I2C or SPI (Automatically Selected)
- Working Fluids: Non-corrosive, non-ionic (e.g., air, dry gases)
- Optional Protection: Parylene coating for moisture/harsh media
Technical Specifications
| Feature | Specification | Details |
|---|---|---|
| Pressure Ranges | 0.5 to 60 inH2O | Refer to Standard Pressure Ranges table for specific models (e.g., 0.5 inH2O to 60 inH2O, 0 to 1 inH2O to 0 to 60 inH2O) |
| Supply Voltage | 1.68V to 3.6V | Recommended; Absolute Maximum 3.63 Vdc |
| Accuracy | Better than 0.25% | Total Error Band varies by pressure range. See Performance Characteristics. |
| Output Resolution | 16/17/18 bit | Selectable via ordering options. Higher resolution results in slower update times. |
| Temperature Ranges | Compensated: 0C to 70C (Commercial), -20C to 85C (Industrial) | Operating: -25C to 85C; Storage: -40C to 125C |
| Environmental | Humidity Limits: 0 to 95% RH (non-condensing) | |
| Maximum Ratings | Common Mode Pressure: 10 psig | Lead Temperature (soldering 2-4 sec.): 270 C |
| Supply Current | Active State: 2.6 mA (Typical) | Idle State: 100 to 250 nA (Typical) |
| Power On Delay | 2.5 ms | |
| Data Update Time (tDU) | Varies | Exclusive of communications; see Performance Characteristics table. |
| I2C Electrical Parameters | Input High Level: 80% of Vs (Min) | Input Low Level: 20% of Vs (Max); Output Low Level: 10% of Vs (Max); I2C Pull-Up Resistor: 1,000 (Typ); I2C Load Capacitance: 200 pF (Typ); I2C Input Capacitance: 10 pF (Typ); I2C Address: 41 (Decimal) |
| SPI Electrical Parameters | SCLK Frequency: 0.05 - 5 MHz (Tested to 1.0 MHz) | Refer to Interface Timing Diagrams for detailed parameters. |
| Output Data Format | Status Byte, 24-bit Pressure Value, 24-bit Temperature Value | Unused bits beyond calibrated bit width are undefined. |
| Package Options | SIP, DIP, J-Lead SMT, Low Profile DIP | Refer to Package Drawings and How to Order Guide for details. |
| Device Options | Parylene Coating (N/A for 2O ranges) | Output Resolution (16, 17, or 18 bits) |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.