current monitoring CHIPSENSE AN1V 100 PB20 suitable for wind energy converters and static converters
AN1V PB20 Current Sensor
The AN1V PB20 is an open-loop current sensor based on Hall effect principle, utilizing ASIC technology for proportional output relative to power supply variations. It features isolation between primary and secondary sides, no insertion loss, and a compact size. This sensor is designed for measuring DC, AC, and pulse currents.
Product Attributes
- Brand: (Chipsensor)
- Materials: Copper busbar and pins are tin-plated copper. Housing material complies with UL 94-V0.
- Certifications: UL 94-V0, IEC 60664-1:2020, IEC 61800-5-1:2022, IEC 62109-1:2010
Application Fields
- AC variable frequency drives
- Uninterruptible Power Supplies (UPS)
- DC motor drive static converters
- Switch Mode Power Supplies (SMPS)
- Welding machine power supplies
- Battery management
- Wind energy converters
Technical Specifications
| Model | Primary Rated Current (RMS) (A) | Primary Current Measurement Range (A) | Supply Voltage (V) | Zero Point Output Voltage (V) | Theoretical Gain (mV/A) | Current Consumption (mA) | Load Resistance (k) | Output Bandwidth (-3dB) (kHz) | Output Noise (mV) | Accuracy @ IPN X (% of IPN) | Tracking Time @ 90% of IPN (s) | Operating Temperature () |
| AN1V 50 PB20 | -50 to 50 | -50 to 50 | 4.5 - 5.5 (Typical 5.0) | VCC/2 | 40 | 8 - 11 | 5.1 | 250 | 5 | -2 to 2 | 2.5 - 5 | -40 to 150 |
| AN1V 100 PB20 | -100 to 100 | -100 to 100 | 4.5 - 5.5 (Typical 5.0) | VCC/2 | 20 | 8 - 11 | 5.1 | 250 | 2.7 | -2 to 2 | 2.5 - 5 | -40 to 150 |
| AN1V 150 PB20 | -150 to 150 | -150 to 150 | 4.5 - 5.5 (Typical 5.0) | VCC/2 | 13.33 | 8 - 11 | 5.1 | 250 | 1.8 | -2 to 2 | 2.5 - 5 | -40 to 125 |
| AN1V 200 PB20 | -200 to 200 | -200 to 200 | 4.5 - 5.5 (Typical 5.0) | VCC/2 | 10 | 8 - 11 | 5.1 | 250 | 1.4 | -2 to 2 | 2.5 - 5 | -40 to 85 |
Safety Precautions
Sensor usage must comply with IEC 61800-5-1 standard. Install the sensor in electronic or electrical equipment that meets application and safety requirements. Be aware of potential hazardous voltages during operation. Ensure conductive parts are not accessible after installation. The main power supply must be disconnectable.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.