Integrated Hall Effect Latch Sensor DIODES AH374-W-7 for Brushless DC Motor Commutation Applications
AH374 Single Phase Hall Effect Latch
The AH374 is an integrated Hall-Effect latched sensor designed for electronic commutation of brush-less DC motor applications. It features an on-chip Hall voltage generator, a comparator for Hall voltage amplification, and a Schmitt trigger for noise rejection. The device provides an open-drain output and operates over a wide supply voltage range with temperature compensation. When magnetic flux density exceeds the operate point (BOP), the output is switched on (pulled low). The output remains on until the magnetic flux density reversal falls below the release point (BRP), at which time the output switches off. The AH374 is suitable for applications such as brush-less DC motors, brush-less DC fans, revolution counting, and speed measurement.
Product Attributes
- Brand: Diodes Incorporated
- Certifications: Totally Lead-Free & Fully RoHS Compliant, Halogen and Antimony Free (Green Device)
Technical Specifications
| Characteristic | Value | Unit | Condition |
|---|---|---|---|
| Operating Supply Voltage | 2.2 to 20 | V | Operating |
| Operating Temperature Range | -40 to +125 | C | Operating |
| Output On Voltage | mV | IOUT = 20mA | |
| Supply Current | mA | B < BRP | |
| Output Leakage Current | < 0.1 | A | Output off |
| Operation Point (BOP) | 5 to 60 | Gauss | TA = +25C, VDD = 2.5V to 20V |
| Release Point (BRP) | -60 to -5 | Gauss | TA = +25C, VDD = 2.5V to 20V |
| Hysteresis (BHY) | 60 | ||
| Output Sink Capability | 25 | mA | |
| Package Power Dissipation (SIP-3) | 550 | mW | @TA = +25C |
| Package Power Dissipation (SC59, SOT23) | 230 | mW | @TA = +25C |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.