NTC Thermistor KNSCHA 192NTC0002 for Temperature Sensing in Electronic and Power Supply Applications
Product Overview
This product is a Negative Temperature Coefficient (NTC) thermistor designed for various electronic applications. It offers a rated zero-power resistance value with a specified accuracy error and a maximum steady-state current. Its primary function is to act as a temperature-sensitive resistor, changing its resistance with temperature variations. It is suitable for use in conversion power supplies, switching power supplies, electronic energy-saving lamps, electronic ballasts, and other electronic and power circuits.
Product Attributes
- Brand: Not specified
- Origin: Not specified
- Material: Not specified
- Color: Not specified
- Certifications: Not specified
Technical Specifications
| Parameter | Value | Unit | Description |
|---|---|---|---|
| Rated Zero-Power Resistance | The resistance value at zero power. | ||
| Accuracy Error | |||
| Maximum Steady-State Current | |||
| Environmental Temperature | Measured resistance values are taken at environmental temperatures of or . | ||
| Test Power | |||
| Thermal Time Constant | s | The time required for the thermistor element to change its temperature from an initial temperature to a final temperature when the ambient temperature changes abruptly under zero-power conditions. | |
| Dissipation Factor | /mW | The power required to raise the thermistor's temperature by 1 at a certain ambient temperature due to self-heating. Can be calculated using the formula: /. | |
| Rated Power | mW | The power required to raise the surface temperature by 1 due to self-heating at an ambient temperature of 25. | |
| Allowable Operating Current | mA | The current that causes a temperature rise of 1 due to self-heating in still air. |
Recommended Soldering Conditions
Reflow Soldering
| Parameter | Value | Unit |
|---|---|---|
| Preheating | ||
| Temperature above 183 | ||
| Peak Temperature | Maximum | |
| Soldering Cycles | Maximum |
Manual Soldering
| Parameter | Value | Unit |
|---|---|---|
| Soldering Iron Power | Maximum | W |
| Preheating | ||
| Soldering Iron Tip Temperature | Maximum | |
| Soldering Time | Maximum | s |
| Soldering Cycles | Maximum |
Note: Use mild, non-activated flux for soldering and clean appropriately. Use gentle, non-activated flux for soldering and clean appropriately. Do not allow the soldering iron tip to contact the lead frame.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.