Industrial current transducer LEM HLSR20-P with through hole PCB mounting and single five volt power supply
Current Transducer HLSR-P series
The HLSR-P series are open-loop, multi-range current transducers with voltage output, designed for the electronic measurement of DC, AC, and pulsed currents. They provide galvanic separation between the primary and secondary circuits, featuring a compact design for through-hole PCB mounting, single +5 V supply, and low power consumption. These transducers are factory calibrated and offer a high bandwidth with very low loss magnetic cores. Key advantages include an extremely low profile (h = 12 mm), low footprint, low offset drift, and over-drivable Uref. They are ideal for applications such as AC variable speed and servo motor drives, static converters for DC motor drives, battery-supplied applications, Uninterruptible Power Supplies (UPS), Switched Mode Power Supplies (SMPS), power supplies for welding, combiner boxes, and MPPT systems.
Product Attributes
- Brand: LEM International SA
- Certifications: EN 50178: 1997, IEC 61010-1: 2010, IEC 61326-1: 2012, UL 508: 2010, CSA C22.2 NO. 14-10
- Application Domain: Industrial
- Case Material: V0 (According to UL 94)
- Comparative Tracking Index (CTI): 600
Technical Specifications
| Model | Primary Nominal RMS Current (IP N) | Primary Current Measuring Range (IP M) | Supply Voltage (UC) | Current Consumption (IC) | Reference Voltage (Output) (Uref) | Output Voltage Range (Uout - Uref) | Electrical Offset Voltage (UO E) | Temperature Coefficient of UO E (TCUO E) | Sensitivity Error (S) | Temperature Coefficient of S (TCS) | Linearity Error (L) | Noise Voltage Spectral Density (uno) | Delay Time (tD 10) | Delay Time (tD 90) | Frequency Bandwidth (-3 dB) (BW) | Sum of Sensitivity and Linearity @ IP N (S L) |
| A | A | V | mA | V | V | mV | mV/K | % | ppm/K | % of IP N / IP M | V/Hz | s | s | kHz | % of IP N | |
| HLSR 10-P | 10 | -25 to 25 | 4.5 - 5.5 | 19 - 25 | 2.48 - 2.52 | -2 to 2 | -5 to 5 | -0.075 to 0.075 | -0.5 to 0.5 | -200 to 200 | -0.5 to 0.5 | 28 | 2 | 2.5 | 400 | -1 to 1 |
| HLSR 16-P | 16 | -40 to 40 | 4.5 - 5.5 | 19 - 25 | 2.48 - 2.52 | -2 to 2 | -5 to 5 | -0.075 to 0.075 | -0.5 to 0.5 | -200 to 200 | -0.5 to 0.5 | 28 | 2 | 2.5 | 400 | -1 to 1 |
| HLSR 20-P | 20 | * | 4.5 - 5.5 | * | * | * | * | * | * | * | * | * | * | * | * | * |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.