calibrated Silicon Labs Si7006-A20-IM1 humidity and temperature sensor with on chip non volatile memory
Product Description
The Si7006 I2C Humidity and Temperature Sensor is a monolithic CMOS IC designed for accurate humidity and temperature measurements. It integrates sensor elements, an analog-to-digital converter, signal processing, calibration data, and an I2C interface. Utilizing proprietary low-K polymeric dielectrics for humidity sensing, it offers low power consumption, minimal drift and hysteresis, and excellent long-term stability. The sensor is factory-calibrated and its data is stored in on-chip non-volatile memory, ensuring interchangeability without recalibration. Available in a 3x3 mm DFN package, it's reflow solderable and can serve as a drop-in upgrade for existing RH/temperature sensors. An optional factory-installed cover provides protection against liquids and particulates. The Si7006 is ideal for applications requiring precise humidity, dew-point, and temperature measurements, including HVAC/R, thermostats, respiratory therapy, white goods, indoor weather stations, micro-environments, automotive climate control, asset tracking, and mobile devices.
Product Attributes
- Brand: Silicon Laboratories
- Model: Si7006-A20
- Package: 3x3 mm DFN
- Certifications: Patent Protected
Technical Specifications
| Parameter | Symbol | Test Condition | Min | Typ | Max | Unit |
| Power Supply | VDD | Recommended Operating Conditions | 1.9 | 3.6 | V | |
| Operating Temperature | TA | Recommended Operating Conditions | 40 | +125 | C | |
| Input Voltage High | VIH | SCL, SDA pins | 0.7xVDD | V | ||
| Input Voltage Low | VIL | SCL, SDA pins | 0.3xVDD | V | ||
| Input Voltage Range | VIN | SCL, SDA pins with respect to GND | 0.0 | VDD | V | |
| Input Leakage | IIL | SCL, SDA pins | 1 | A | ||
| Output Voltage Low | VOL | SDA pin; IOL = 2.5 mA; VDD = 3.3 V | 0.6 | V | ||
| Output Voltage Low | VOL | SDA pin; IOL = 1.2 mA; VDD = 1.9 V | 0.4 | V | ||
| Current Consumption (RH conversion) | IDD | in progress | 150 | 180 | A | |
| Current Consumption (Temp conversion) | IDD | in progress | 90 | 120 | A | |
| Current Consumption (Standby, 40 to +85 C) | IDD | No conversion or I2C transaction | 0.06 | 0.62 | A | |
| Current Consumption (Standby, 40 to +125 C) | IDD | No conversion or I2C transaction | 0.06 | 3.8 | A | |
| Peak IDD (powerup) | IDD | Occurs once during powerup | 3.5 | 4.0 | mA | |
| Peak IDD (I2C operations) | IDD | Occurs during I2C commands | 3.5 | 4.0 | mA | |
| Heater Current | IHEAT | HTRE bit enabled | 3.1 to 94.2 | mA | ||
| Conversion Time (12-bit RH) | tCONV | 10 | 12 | ms | ||
| Conversion Time (11-bit RH) | tCONV | 5.8 | 7 | ms | ||
| Conversion Time (10-bit RH) | tCONV | 3.7 | 4.5 | ms | ||
| Conversion Time (8-bit RH) | tCONV | 2.6 | 3.1 | ms | ||
| Conversion Time (14-bit temperature) | tCONV | 7 | 10.8 | ms | ||
| Conversion Time (13-bit temperature) | tCONV | 4 | 6.2 | ms | ||
| Conversion Time (12-bit temperature) | tCONV | 2.4 | 3.8 | ms | ||
| Conversion Time (11-bit temperature) | tCONV | 1.5 | 2.4 | ms | ||
| Powerup Time | tPU | From VDD 1.9 V to ready for conversion, 25 C | 18 | 25 | ms | |
| Powerup Time | tPU | From VDD 1.9 V to ready for conversion, full temp range | 80 | ms | ||
| Powerup Time | tPU | After issuing a software reset command | 5 | 15 | ms | |
| Hysteresis | VHYS | High-to-low vs low-to-high transition | 0.05 x VDD | V | ||
| SCLK Frequency | fSCL | I2C Interface | 400 | kHz | ||
| SCL High Time | tSKH | I2C Interface | 0.6 | s | ||
| SCL Low Time | tSKL | I2C Interface | 1.3 | s | ||
| Start Hold Time | tSTH | I2C Interface | 0.6 | s | ||
| Start Setup Time | tSTS | I2C Interface | 0.6 | s |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.