High precision temperature sensor Slkor SL-W-TRS-5.5D1 with digital output and differential infrared thermopile technology
Product Overview
The SL-W-TRS-5.5Dx series are high-precision digital output differential infrared thermopile sensors designed for a wide range of non-contact temperature measurement products and industries. These sensors integrate a MEMS thermopile sensor chip, an NTC thermistor, and a professional signal conditioning ASIC chip. The ASIC features a 24-bit Sigma-Delta high-precision ADC, a low-noise PGA, and interface circuitry. The series comprises six models (D1 to D6), combining a base sensor (D1) with a base sensor and optical cup, suitable for temperature measurement applications in products like medical devices, smart wearables, and electronic sentinels.
Product Attributes
- Brand: SLKormicro
- Series: SL-W-TRS-5.5Dx
- Packaging: TO-46 metal can package
- Interface: Standard I2C
Technical Specifications
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Absolute Maximum Ratings | ||||||
| Supply Voltage | VDD | -0.3 | 4.2 | V | ||
| Digital Output Voltage | -0.3 | VDDIO+0.3 | V | |||
| ESD Protection (HBM) | 2 | kV | ||||
| Storage Humidity | 40 | % RH | ||||
| Storage Temperature | -40 | 100 | ||||
| Performance Parameters | ||||||
| Chip Size | 1.121.12 | mm | ||||
| Sensitive Area | 0.7 0.7 | mm | ||||
| Field of View (FOV) | 60 | 90 | ||||
| Operating Temperature | -30 | 90 | ||||
| Supply Voltage | 2.3 | 3.3 | 3.6 | V | ||
| Typical Application Mode Operating Current | Iavdd | 733 | 800 | A | default configuration | |
| Sleep Current | Isleep | 5 | A | |||
| Standby Current (25) | 100 | nA | ||||
| ADC Resolution | 24 | Bit | ||||
| Temperature Measurement Range | 0 | 150 | Object temperature application | |||
| Temperature Measurement Range | 28 | 42 | Body temperature application | |||
| Temperature Measurement Accuracy (Object Temp) | 2 | To 100 | ||||
| Temperature Measurement Accuracy (Object Temp) | 3% | readout | To > 100 | |||
| Temperature Measurement Accuracy (Object Temp) | 0.3 | |||||
| Temperature Measurement Accuracy (Body Temp) | 0.3 | |||||
Note: Unless otherwise specified, conditions are VCC = 3.3V, ambient temperature 25C, and PGA gain 64x.
Standard Temperature Accuracy: Accuracy specified for Ta between 0C to 40C and To between 0C to 150C. (Refer to Figure 3 for detailed chart).
Medical Temperature Accuracy: Accuracy specified for Ta between 15C to 40C and To between 28C to 42C. (Refer to Figure 4 for detailed chart).
Note: Accuracy specifications apply only under stable isothermal conditions. Sensor accuracy does not represent final product accuracy. Temperature differences on the sensor package can affect measurement accuracy.
General Registers
| Address | Description | R/W | Default |
|---|---|---|---|
| 0x00 | Soft Reset | W | 0x00 |
| 0x02 | Data Ready (Temp_rdy, To_drdy, Ta_drdy) | R | 0x00 |
| 0x03 | Raw Data Ready (To_raw_drdy, Ta_raw_drdy) | R | 0x00 |
| 0x10-0x12 | Object Temperature Output (after DSP and IIR filter) | R | 0x00 |
| 0x16-0x18 | Ambient Temperature Output (internal sensor, calibrated) | R | 0x00 |
| 0x22-0x24 | Object Temperature Raw Data (before calibration) | R | 0x00 |
| 0x30 | Command Register (sleep_en, clk_mode, mode_en, mode_sel) | RW | 0x00 |
EEPROM Registers
| Address | Description | R/W |
|---|---|---|
| 0x92 | Chip Address (Configurable I2C address) | RW |
| 0x93 | System Configuration (FILT_COEF, output_mode, OSR_T) | RW |
| 0x94 | System Configuration (adc_dither_en, SERIAL_filter_en, VT_SCALE) | RW |
| 0x95 | Sensor Configuration (Gain_P, OSR_P) | RW |
| 0x97 | BPS Configuration (RES_DAC) | RW |
Digital Communication
The device supports I2C communication protocol. The I2C device address can be configured via the Chip_Address register (0x92). A general call 7-bit address is 0x7F.
Mechanical Specifications
| Pin | Symbol | Definition |
|---|---|---|
| 1 | SDA | Serial Data Input/Output (I2C Data) |
| 2 | SCL | Serial Clock Input (I2C Clock) |
| 3 | VDD | Core Chip Power Supply |
| 4 | GND | Ground |
Refer to Figures 8 and 9 for base pin definitions and dimensional drawings. External dimensions for SL-W-TRS-5.5Dx series models are provided in Figures 10-12.
Recommended Reflow Curve
Refer to Figure 13 and Table 9 for recommended lead-free solder reflow temperature curve parameters.
Other Recommendations
- Handle with care to avoid damage from pressure and electrostatic discharge exceeding absolute maximum ratings.
- Avoid contact with corrosive cleaning agents. Clean optical windows with alcohol and cotton swabs.
- Store in a well-sealed environment, protected from moisture, shock, dust, and static electricity.
- Consult the company or its representatives before applying the product in special circumstances where improper operation could affect semiconductor life or cause physical damage.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.