Infrared remote control receiver VISHAY TSOP2236 with integrated IR filter and low supply current in compact design
Product Overview
The TSOP22.., TSOP48.., TSOP24.. and TSOP44.. series are miniaturized IR receiver modules designed for infrared remote control systems. They feature a PIN diode and preamplifier in a single package with an integrated IR filter. These modules offer improved immunity to HF, RF, and optical noise, low supply current, and are insensitive to supply voltage ripple. They are suitable for direct connection to microprocessors for decoding. The TSOP24../TSOP44.. series are optimized to suppress spurious pulses from Wi-Fi and CFL sources, while the TSOP22../TSOP48.. series are primarily for compatibility with older AGC2 designs. New designs should prefer the TSOP24../TSOP44.. series with AGC4.
Product Attributes
- Brand: Vishay Semiconductors
- Material categorization: Refer to www.vishay.com/doc?99912
- Certifications: Not qualified according to automotive specifications.
Technical Specifications
| Series | Carrier Frequency | AGC Type | Recommended For | Package | Pinning |
| TSOP4830 | 30 kHz | Legacy (AGC2) | Long Burst Remote Controls | Mold | 1=OUT, 2=GND, 3=VS |
| TSOP2230 | 30 kHz | Legacy (AGC2) | Long Burst Remote Controls | Mold | 1=OUT, 2=VS, 3=GND |
| TSOP4430 | 30 kHz | Recommended (AGC4) | Long Burst Codes | Mold | 1=OUT, 2=GND, 3=VS |
| TSOP2430 | 30 kHz | Recommended (AGC4) | Long Burst Codes | Mold | 1=OUT, 2=VS, 3=GND |
| TSOP4833 | 33 kHz | Legacy (AGC2) | Long Burst Remote Controls | Mold | 1=OUT, 2=GND, 3=VS |
| TSOP2233 | 33 kHz | Legacy (AGC2) | Long Burst Remote Controls | Mold | 1=OUT, 2=VS, 3=GND |
| TSOP4433 | 33 kHz | Recommended (AGC4) | Long Burst Codes | Mold | 1=OUT, 2=GND, 3=VS |
| TSOP2433 | 33 kHz | Recommended (AGC4) | Long Burst Codes | Mold | 1=OUT, 2=VS, 3=GND |
| TSOP4836 | 36 kHz | Legacy (AGC2) | Long Burst Remote Controls | Mold | 1=OUT, 2=GND, 3=VS |
| TSOP2236 | 36 kHz | Legacy (AGC2) | Long Burst Remote Controls | Mold | 1=OUT, 2=VS, 3=GND |
| TSOP4436 | 36 kHz | Recommended (AGC4) | Long Burst Codes | Mold | 1=OUT, 2=GND, 3=VS |
| TSOP2436 | 36 kHz | Recommended (AGC4) | Long Burst Codes | Mold | 1=OUT, 2=VS, 3=GND |
| TSOP4838 | 38 kHz | Legacy (AGC2) | Long Burst Remote Controls | Mold | 1=OUT, 2=GND, 3=VS |
| TSOP2238 | 38 kHz | Legacy (AGC2) | Long Burst Remote Controls | Mold | 1=OUT, 2=VS, 3=GND |
| TSOP4438 | 38 kHz | Recommended (AGC4) | Long Burst Codes | Mold | 1=OUT, 2=GND, 3=VS |
| TSOP2438 | 38 kHz | Recommended (AGC4) | Long Burst Codes | Mold | 1=OUT, 2=VS, 3=GND |
| TSOP4840 | 40 kHz | Legacy (AGC2) | Long Burst Remote Controls | Mold | 1=OUT, 2=GND, 3=VS |
| TSOP2240 | 40 kHz | Legacy (AGC2) | Long Burst Remote Controls | Mold | 1=OUT, 2=VS, 3=GND |
| TSOP4440 | 40 kHz | Recommended (AGC4) | Long Burst Codes | Mold | 1=OUT, 2=GND, 3=VS |
| TSOP2440 | 40 kHz | Recommended (AGC4) | Long Burst Codes | Mold | 1=OUT, 2=VS, 3=GND |
| TSOP4856 | 56 kHz | Legacy (AGC2) | Long Burst Remote Controls | Mold | 1=OUT, 2=GND, 3=VS |
| TSOP2256 | 56 kHz | Legacy (AGC2) | Long Burst Remote Controls | Mold | 1=OUT, 2=VS, 3=GND |
| TSOP4456 | 56 kHz | Recommended (AGC4) | Long Burst Codes | Mold | 1=OUT, 2=GND, 3=VS |
| TSOP2456 | 56 kHz | Recommended (AGC4) | Long Burst Codes | Mold | 1=OUT, 2=VS, 3=GND |
Key Technical Parameters
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Test Condition |
| Supply Voltage | VS | 2.5 | - | 5.5 | V | |
| Supply Current | ISD | - | 0.55 | 0.9 | mA | EV = 0, VS = 5 V |
| Supply Current | ISH | - | - | 0.8 | mA | EV = 40 klx, sunlight |
| Output Voltage Low | VOSL | - | - | 100 | mV | IOSL = 0.5 mA, Ee = 0.7 mW/m2, test signal see Fig. 1 |
| Minimum Irradiance | Ee min. | - | 0.12 | 0.25 | mW/m2 | Pulse width tolerance: tpi - 5/fo |
| Maximum Irradiance | Ee max. | 50 | - | - | W/m2 | tpi - 5/fo |
| Directivity Half Angle | 1/2 | - | 45 | - | deg | |
| Junction Temperature | Tj | - | - | 100 | C | |
| Storage Temperature Range | Tstg | -25 | - | +85 | C | |
| Operating Temperature Range | Tamb | -25 | - | +85 | C | |
| Power Consumption | Ptot | - | - | 10 | mW | Tamb 85 C |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.