Used for phase identification on de-energized transmission lines, switchgear, and live displays. Ensures consistent phase naming with the main grid and solves future grid-connection issues.

Important: Only for use on de-energized cable cores. Always verify power is off before testing.

• Display: 3.5″ LCD color screen

• Power: 11.1V Li-ion battery (≥12h operation)

• Pulse voltage ≈400V, pulse current ≤4A

• Operating temperature: -30℃ to +45℃

• Display: 2.8″ LCD (320*240)

• Power: 3.7V Li-ion battery (≥12h operation)

• Gain: 3 levels + 1 level (for live displays)

• Flexible coil inner diameter: Φ200mm

• Real-time battery indicator, auto shutdown at low battery

• Highlighted area during pulse transmission for each phase

• Loop resistance measurement; displays “>10kΩ" for open circuit or poor connection

• Signal strength bar; adjust gain if too low or high

• Wiring diagram for correct connection

• Requires positive polarity (arrow right)

• Successful identification: displays A(yellow), B(green), C(red) with buzzer (1/2/3 beeps)

• Failed or reversed phase: black X or black letters, no buzzer