China HIOKI Power Quality Analyzer PQ3198 Easier And More Accurate Power Fault Troubleshooting for sale

HIOKI Power Quality Analyzer PQ3198 Easier And More Accurate Power Fault Troubleshooting

Name: HIOKI Power Quality Analyzer PQ3198 Easier And More Accurate Power Fault Troubleshooting
Brand: Shaanxi Qindiyuan Environmental Protection Equipment Co., Ltd.

Price Negotiable

Price: 9610-12000USD

MOQ: 1

Delivery Time: 6-8weeks

Brand: HIOKI

Product Description

Power quality issues can be inspected according to global standards (IEC61000-4-30 Class A)
Continuous high-precision measurements (V: 0.1% ± of standard voltage, A: 0.1% of ± rdg. ±0.1% f.s. W:±0.2% rdg. ±0.1% f.s.)
Can also measure high-order harmonic components (Supraharmonics), voltage measurement up to 80kHz wide band
Instantaneous overvoltage peak up to 6000V, up to 700kHz
Maximum measurable AC 6000A
Uses (ch1, ch2, ch3) and ch4 can perform dual system power measurement and efficiency calculations
Supports simple inverter measurements, base frequency 40~70Hz, carrier frequency ~20kHz
Simple reports can be created using the PQ ONE accessory

Basic parameters

Measure the number of lines	In addition to single-phase 2-wire/single-phase 3-wire/three-phase 3-wire/three-phase 4-wire, CH4 also measures voltage/current (DC or AC)
Voltage range	ch1~ch3: Voltage measurement 600.00Vrms, peak instantaneous voltage measurement 6.0000kV ch4: 600.00Vrms or DC, peak instantaneous voltage measurement 6.0000kV
Current travel range	AC 500.00mA~5.0000kA (measurement range varies depending on the sensor used)
Power range	300.00W~3.0000MW (automatically determined by voltage and current range used)
Basic accuracy	Voltage: Standard voltage± 0.1% rdg. Current: ±0.1% rdg. ±0.1% f.s. + current sensor accuracy Active power: ±0.2% rdg. ± 0.1% f.s. + current sensor accuracy
Measurement function	Instantaneous overvoltage: 2MHz sampling rate Frequency 1 waveform: starts from 1 waveform 200kHz sampling rate Voltage 1/2 RMS value: calculates one waveform for every half waveform offset Current 1/2 RMS value: calculates every half waveform Voltage rise, voltage drop, instantaneous interruption: detected when voltage is 1/2 RMS value Impulse voltage: detected when the voltage is 1/2 of the RMS value Voltage waveform comparison: automatically generates and compares the judgment region Instantaneous flicker value: matches IEC61000-4-15 Frequency 200ms: starts operation from 10 waveforms and 12 waveforms 40~70Hz Frequency 10 seconds: starts calculation from waveforms within 10 seconds 40~70Hz peak voltage waveform, peak current waveform voltage, current, active power, apparent power, reactive power, active energy, power factor, displacement power factor, voltage imbalance, current imbalance, efficiency Higher harmonics* (voltage/current): 2k~80kHz band *Supraharmonics Harmonics/phase angle (voltage/current), harmonic power: 0th to 50th order Harmonic voltage and current phase difference: 1st to 50th order Total harmonic distortion rate (voltage/current) Interharmonic (voltage/current): 0.5th to 49.5th order K factor (multiplier rate) V10 flash, IEC flash (short/long) Mains signaling voltage
The longest recorded time	When the recurrence feature is ON: 1 year, maximum recorded events: 9999*366 days (maximum 9999 records per day). When recurring feature is off: 35 days, maximum recorded time: 9999 cases
Interface	SD/SDHC card, LAN (HTTP server function/FTP combined), USB 2.0 (communication)
Display	6.5-inch TFT color LCD (640*480 pixels)
Power supply	AC adapter Z1002 (100~240V, rated 1.7A, 50/60Hz) Battery pack Z1003 (continuous usage time 180 minutes, charging via AC adapter connection, charging time 5 hours 30 minutes)
Volume and weight	300W* 211H* 68D mm, 2.6 kg (including battery pack Z1003)
Attachment	User manual1, measurement guide 1, 1 compression wire L10001 (red, yellow, blue, gray, black 4, alligator clip 8), solenoid 20, color test clip, AC adapter Z1002 1, sling 1, USB cable (1m) 1, battery pack Z1003 1, SD memory card 2GB Z4001*1