China HIOKI Battery Tester BT3554-50 the aging status of UPS and lead-acid batteries can be determined more quickly for sale

HIOKI Battery Tester BT3554-50 the aging status of UPS and lead-acid batteries can be determined more quickly

Name: HIOKI Battery Tester BT3554-50 the aging status of UPS and lead-acid batteries can be determined more quickly
Brand: Shaanxi Qindiyuan Environmental Protection Equipment Co., Ltd.

Price Negotiable

Price: 320-400USD

MOQ: 1

Delivery Time: 6-8weeks

Brand: HIOKI

Product Description

Even if the battery is installed in the device, determination can be made without power outages
From measurement to record saving takes as little as 2 seconds, reducing operating time by 60% compared to the older model 3554.
Tests internal impedance/voltage, instantly determining the degree of aging PASS / WARNING / FAIL※1
Equipped with noise reduction technology to enhance noise resistance
Simplified testing steps based on main interface and voice ※2 prompts
Test data can be linked and saved with on-site measurement information, thereby reducing management man-hours.
All types of measurement data can be managed centrally using GENNECT Cross software※3
Measurement values are wirelessly transmitted directly to Excel® forms (requires optional wireless adapter Z3210)
Equipped with protectors to enhance portability and withstand on-site use.

The threshold for passing the qualification varies depending on the battery manufacturer, type, capacity, and other factors. The internal impedance/terminal voltage of new or qualified batteries needs to be measured in advance. Compared to sealed lead-acid batteries, open-type (liquid) lead-acid batteries or alkaline batteries sometimes make it difficult to judge aging due to their smaller changes in internal resistance.
After Bluetooth® connection, the device will receive a voice prompt.
Data recovery can be achieved using tablet devices or smartphone applications. (Requires optional wireless adapter Z3210)

Basic Parameters (Accuracy Guarantee Period: 1 year)

Model	BT3554-50 (main unit model, not sold separately; Main unit, shell with English label) BT3554-51 (a set of BT3554-50 and pin-shaped test wire 9465-10) BT3554-52 (a set of BT3554-50 and needle-shaped test line L2020) BT3554-53 (main unit model, not sold separately; Main unit, shell with Chinese marking) BT3554-54 (a set of BT3554-53 and needle-shaped test line 9465-10) BT3554-55 (a kit of BT3554-53 and needle test line L2020)
Resistance measurement range	3 mΩ (maximum display 3,100 mΩ, resolution 1 μΩ) to 3 Ω range (maximum display 3,100 Ω, resolution 1 mΩ), 4-speed switching. Measurement accuracy: ±0.8% rdg ±6 dgt (only 3 mΩ range ± 1.0% rdg ±8 dgt). Measurement current frequency: 1 kHz ±30 Hz; 1 kHz ±80 Hz with noise frequency avoidance enabled Measurement current: 160 mA (3 mΩ/30 mΩ range), 16 mA (300 mΩ range), 1.6 mA (3 Ω range) Open terminal voltage: 5 V max.
Voltage measurement range	±6 V (maximum display± 6.000 V, resolution: 1 mV) to ±60 V (maximum display± 60.00 V, resolution: 10 mV), 2-level switching, measurement accuracy: ±0.08% rdg ±6 dgt
Temperature measurement accuracy	Measurement range: -10°C~60°C, maximum display 60.0°C, resolution 0.1°C, measurement accuracy※ ±1.0°C ※ When using the clip-on temperature sensor 9460 BT3554-50 single-unit accuracy: for analog input: use the attached ±0.5°C temperature sensor clam-type test line 9460 ※ When using the temperature probe 9451, please add ±0.5° C (cable length 1.5m) ※ When using the temperature probe 9451s, please add ±0.5°C (cable length 0.1m). BT3554-50 driver accuracy: ±0.5°C for analog input
Maximum allowable input voltage	DC 60 V max. Cannot input via AC
Measurement time	100 ms
Response time	About 1.6 seconds
Comparator	Comparison and notification of set thresholds and measured values. Notification method: The results shown in the table below are (segments), beep. Voltage value (high): Impedance (low) = PASS, Impedance (medium) = WARNING, Impedance (high) = FAIL Voltage value (low): Impedance (low) = WARNING, Impedance (medium) = WARNING, Impedance (high) = FAIL When the result is "WARNING" or "FAIL," the buzzer sounds and the screen turns red. Backlight Voltage Determination Method: ABS (Absolute Value Determination), POL (± Polarity Determination) Set Save: 200 points
Storage function	Operation Content: Save, read, and delete measurement data. Save/delete preset information. Data Volume: 6000 . Memory Composition: Each unit stores 500 data entries (12 cells). Content: Measurement data and preset information are stored together . (1) Measurement Data ※ You can save, read, and read data by operating the host. Delete -1. Date and Time - 2. Impedance value, voltage value, temperature -3. Comparator threshold and determination results 2. Preset Information Save, read, and delete from the corresponding application software (GENNECT Cross / GENNECT ONE) -1. Data number: 1~100 ※ Cannot save identical numbers ※ Each data number is saved sequentially 2. 3. 4. -2. Location information: When using the UPS, you can annotate any of the -3. Device information: UPS management number, etc., can be annotated at will . -4. Battery number: 1~500 (start number, end number)
Measurement and recording guidance	Operation details: Displays and voice via the main interface, notifying you of the next measured battery number. ※ Voice is output via smartphone/tablet when using the Z3210 or the application software (GENNECT Cross). Preparation: Transmit preset information to the host via the corresponding application software (GENNECT Cross / GENNECT ONE).
Communication interface	USB Bluetooth®️ wireless communication (when equipped with Z3210)
Other features	Temperature measurement (-10.0°C to 60.0°C), zero adjustment, hold function, auto hold function, automatic storage function, automatic power-saving mode, clock
Power supply	AAA alkaline battery (LR6) *8 Continuous usage time: approximately 8.3 hours (without Z3210) about 8.2 hours (with Z3210 and wireless communication)
Volume and weight	199 W * 132 H * 60.6 D mm (with case installed) 960 g (including battery and case)
Attachment	Carry-on case: C1014 1, protective case Z5041 1, fuse kit Z50501, zero adjustment board 1, lanyard 1, USB cable 1, AAA alkaline battery (LR6) 8, user manual 1
	BT3554-50: No accessory probe BT3554-51: Needle test line 9465-10 1 BT3554-52: Needle-shaped test line L2020 1 BT3554-53: No accessory probe BT3554-54: Needle test line 9465-10 1 BT3554-55: Needle-shaped test line L2020 1