CAF L329-B805 High-temperature and corrosive liquids with vapor or foam radar level gauges high speed by the chip circuit the height of the target to be measured is determined from this calculation
1. The L329-B80 series frequency-modulated radar level gauge has a measurement accuracy of up to ±1mm, with a small blind spot of 50mm.
2. Smaller antenna size, meeting the needs of measurement for more working scenarios.
3. Multiple lens antennas, smaller emission angles, more concentrated energy, stronger echo signals, and higher reliability compared to other radar products under the same industrial and mining conditions.
4. Stronger penetration, allowing normal use even when adhesion and condensation occur.
5. Wider dynamic signal range, making measurements more stable for low dielectric constants.
6. Multiple measurement modes, selectable material level or empty height display, current output can be forward or backward.
7. Smaller measurement blind spots, achieving good results even for small tank measurements.
8. High signal-to-noise ratio, ensuring better performance even under fluctuating conditions.
9. High frequency is the ** choice for measuring solid and low dielectric constant media.
Technical Specifications
| Item | Specification | |
|---|---|---|
| Product Model | L329‑B804 | |
| Application | Highly corrosive liquids, vapor, foam, stirring tanks | |
| Measuring Medium | Strong acid, strong alkali, corrosive liquid with vapor/foam/stirring | |
| Measuring Range | 0.1 m ~ 100 m | |
| Process Connection | Flange ≥ DN50 | |
| Process Temperature | –40°C ~ 130°C | |
| Process Pressure | Item | Specification |
| Antenna Size | Measuring Media | Highly corrosive liquids, steam, foam, high temperature & high pressure medium |
| Antenna Material | Measuring Range | 0.1 m ~ 100 m |
| Accuracy | Process Connection | Flange ≥ DN80 |
| Protection Rating | Process Temperature | -40°C ~ 260°C (customizable up to 1100°C) |
| Center Frequency | Process Pressure | -0.1 MPa ~ 2.5 MPa |
| Emission Angle | Antenna Size | 76mm lens antenna (customized according to flange size) |
| Power Supply | Antenna Material | PTFE / Fully filled |
| Housing Material | Measurement Accuracy | ±1 mm |
| Signal Output | Protection Rating | IP67 |
| Center Frequency | 80 GHz | |
| Launch Angle | 3° | |
| Power Supply | Two-wire: DC24V
|
|
| Housing Material | Aluminum / Plastic / Stainless Steel | |
| Signal Output | Two-wire: 4~20mA / HART protocol
|
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.