Intel 10 Single-Phase Residential Energy Storage System | 9.48kWh–37.92kWh Expandable Home Solar Battery

• Model Range: CSPH 3600 / CSPH 5000 / CSPH 6000 (single‑phase)
• Battery: Camel B10 LiFePO4 (9.48kWh, expandable to 4 packs)
• PV Input: Dual MPPT, 100–580VDC, max 9000W
• Rated Output: 3.6kW / 5kW / 6kW (230Vac, 50/60Hz)
• Protection: IP65, wall‑mounted, natural cooling
• Communication: WiFi, RS485, CAN, BMS
• Certifications: CE, IEC62109‑1/‑2, EN61000‑6‑1/‑2/‑3/‑4, AS4777.2‑2020, VDE4105
• Application: Residential, backup power, self‑consumption

The Camel Energy Intel 10 is an all-in-one residential energy storage solution designed for homeowners seeking greater energy independence and lower electricity costs.

By integrating a high-voltage LiFePO4 battery, a dual-MPPT hybrid inverter and intelligent energy management software into one platform, the system enables efficient solar energy storage, reliable backup power and optimized electricity consumption.

With a modular architecture supporting up to four battery packs, users can scale storage capacity from 9.48kWh to 37.92kWh as household energy requirements grow.

Typical applications include:

• Residential solar energy storage
• Backup power during utility outages
• Time-of-use electricity optimization
• Off-grid and hybrid solar systems
• Villas and high-energy-consumption homes

Store excess solar generation and use it at night instead of exporting power to the grid.

Maintain electricity supply for essential appliances during grid failures.

Reduce utility bills through peak shaving and self-consumption.

Expand battery capacity without replacing the original system.

Support larger loads with expandable storage and hybrid inverter architecture.

Suitable for:

• Basic backup power
• Small solar systems
• Apartments

Suitable for:

• Average family homes
• Evening solar energy usage

Suitable for:

• Large villas
• Heavy energy users
• Extended outage protection

Independent tracking of multiple PV strings.

9.48kWh to 37.92kWh modular architecture.

Automatic transition during grid failures.

Suitable for indoor and outdoor installations.

Real-time energy flow and remote system management.

Long cycle life and enhanced thermal stability.

• Backup Mode
• Self-Consumption Mode
• TOU Mode
• Energy Scheduling Mode
• External Control Mode

1. All‑in‑One Integration

   Simplified wiring, reduced space, lower installation cost.

2. High Stability & Safety

   LiFePO4 battery, multi‑protection, industrial‑grade reliability.

3. Max Energy Saving

   High PV self‑use rate, reduce grid electricity cost.

4. Strong Compatibility

   Adapt to mainstream PV modules, global grid standard compliance.

5. Intelligent O&M

   APP monitoring, automatic fault alarm, low after‑sales cost.

6. Global Certifications

   Meet EU, Australia, Germany and other international standards.

Yes. The system integrates a hybrid inverter, LiFePO4 battery and energy management platform into a single solution.

The system starts at 9.48kWh and can be expanded to 37.92kWh through additional battery modules.

Yes. It automatically switches to backup power mode when the utility grid fails.

Yes. The system is rated IP65 and is suitable for outdoor installation under appropriate environmental conditions.

Dual MPPT improves solar harvesting efficiency by allowing independent optimization of multiple PV strings.

Yes. The system supports both grid-connected and off-grid operating modes.