BYD Destroyer 05 Front Bumper (No Radar Holes) — Factory Direct
As a professional automotive exterior parts manufacturing factory, we proudly present the Front Bumper Assembly designed specifically for the BYD Destroyer 05 (5th Generation DM Super Hybrid) , available in a without sensor holes version.
The BYD Destroyer 05 adopts BYD's "Ocean Aesthetics" design language. The most recognizable front-end feature is its frameless dot-matrix grille with staggered chrome trim strips mimicking ocean waves, and a through-type chrome strip at the top integrated with the LED light bar, creating a wide, low-profile visual effect. The vehicle measures 4,780×1,837×1,495mm with a wheelbase of 2,718mm.
According to MIIT declaration information, the Destroyer 05 offers various optional configurations including front parking sensors, ACC adaptive cruise control, and cameras. The base model (55KM Honor Type) does not come with front parking sensors, featuring a bumper design without sensor holes. The interior structure is similar to the Qin PLUS DM-i, but the front fascia造型 is completely different due to the "Ocean Aesthetics" design concept.
In daily use, the front bumper is one of the most vulnerable parts to collisions and scratches – making it one of the most frequently replaced components in collision repairs.
Our product is the without sensor holes version – featuring a clean surface with no parking sensor mounting holes. Suitable for base models without front sensors (such as the 55KM Honor Type), or for modification/replacement needs. For the version with sensor holes, please inquire about other models. Manufactured from modified PP polypropylene via injection molding with impact modifiers and UV stabilizers for excellent impact resistance and weather resistance. The surface features a black primer finish (ready for body-color painting), with clip holes precisely matching the original 1:1 for no-modification installation.
This product is the without sensor holes version – featuring a clean surface with no front parking sensor mounting holes. Suitable for:
-
Base model Destroyer 05 vehicles without front sensors (e.g., 55KM Honor Type)
-
Simplified installation after parking sensor system failure
-
Modification needs (e.g., adding bumper trim or custom body kits)
According to MIIT declaration information, the Destroyer 05 offers optional configurations including front sensors and ACC – vehicles without front sensors use the without-sensor-holes bumper. Exterior dimensions and clip hole positions are identical to the with-sensor-holes version – only the presence of sensor holes differs.
Strictly developed to original Destroyer 05 OE specifications using OEM-grade injection molds, with bumper contours, clip holes, headlight mounting surfaces, and grille slots precisely matching the original 1:1. Compatible with all 2022-2025 Destroyer 05 models. According to body specifications, the Destroyer 05 measures 4,780×1,837×1,495mm with a 2,718mm wheelbase, featuring the "Ocean Aesthetics" front-end design concept.
Manufactured from modified PP polypropylene via injection molding, with impact modifiers and UV stabilizers. The material offers excellent impact resistance, effectively absorbing low-speed collision energy to protect internal components. UV stabilizers ensure no fading, chalking, or aging under long-term outdoor exposure. The product passes 500-hour xenon arc aging testing and salt spray testing, suitable for all climate conditions.
Installation Instructions
I. Tool Preparation
| Tool Name | Specification | Purpose |
|---|---|---|
| Plastic pry tool | Interior trim专用 | Remove clips and trim panels |
| Cross screwdriver / Torx screwdriver | T20 / T25 | Remove relevant screws |
| Socket wrench | 10mm / 12mm | Remove fixing bolts |
| New clip set | Recommended to replace | Secure installation (prevents looseness and noise) |
II. Installation Steps
| Step | Operation | Key Points |
|---|---|---|
| 1. Remove Old Bumper | Remove bottom mounting screws and fender liner screws; disconnect related harness connectors (if equipped); use pry tool to release clips sequentially; remove old front bumper | When unplugging harnesses, pay attention to clips – avoid pulling wires loose; store screws by position |
| 2. Transfer Accessories | Remove original grille, DRLs, fog lamp bezels, license plate bracket – clean and prepare for installation on new bumper | Recommend taking photos to record accessory positions to prevent incorrect installation; avoid damaging clips during cleaning |
| 3. Topcoat Painting | Send the new bumper to the paint booth for topcoat application | ⚠️ Paint first, then install – avoid color differences or overspray contamination on other components |
| 4. Install New Bumper | Align new bumper with vehicle clip holes, press clips sequentially to secure; install mounting screws | Pre-install all clips first, then press to lock uniformly; reinstall screws in original positions |
| 5. Connect Wiring | Connect all harness connectors (DRLs, etc.); verify function | Connectors are keyed – ensure clips lock securely |
| 6. Adjust Alignment | Check uniform gaps between bumper, headlights, fenders, and hood (standard gap approx. 3-5mm) | Fine-tune bracket positions – gaps should be even left and right |
III. Professional Tips
| No. | Tip Content |
|---|---|
| ✅ | Use new clips for installation – old clips become brittle after long-term high-temperature exposure, easily breaking or causing loose retention, leading to bumper looseness and driving noise |
| ✅ | Standard bumper-to-headlight/fender gap is 3-5mm, even left and right. If gaps are uneven, loosen mounting bolts, fine-tune bumper position, then re-tighten |
| ✅ | Conduct light function test after installation – check DRLs, turn signals, etc. for normal operation |
| ✅ | According to chassis parameters, the Destroyer 05 and Qin PLUS DM-i share essentially the same chassis – bumper installation method is identical, reference universal installation procedure |
IV. Common Mistakes
| ❌ Mistake | ✅ Correct Practice |
|---|---|
| ❌ Install before painting | ✅ Paint first, allow paint to fully cure before installation (recommend 24-hour drying time) |
| ❌ Reuse old clips | ✅ Use new clips to prevent looseness and noise |
| ❌ Install without light testing | ✅ Must perform light function test after installation |
| ❌ Tighten bolts before gap adjustment | ✅ Adjust gaps evenly first, then torque bolts to specification |
V. Pre-Painting Checklist
-
Bumper surface has no transport damage, scratches, or deformation
-
Primer layer is intact – no bare spots or runs
-
Confirm vehicle body color code (refer to vehicle nameplate or VIN)
-
Confirm spraying environment temperature/humidity meets paint manufacturer‘s requirements
-
Clean surface with degreaser before painting to remove mold release agent and dust
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.