BYD Destroyer 05 Rear Bumper Camera Cover (Rear Bumper Camera Trim / Backup Camera Housing Cover)
As a professional automotive exterior parts manufacturing factory, we proudly present the Rear Bumper Camera Cover designed specifically for the BYD Destroyer 05 (5th Generation DM Super Hybrid) .
The rear bumper camera cover is a small exterior trim panel installed at the center of the rear bumper or near the license plate light. It protects the backup camera while providing decorative function. The cover works with the rear bumper body to provide a mounting base for the camera and conceal mounting holes and wiring harnesses around the camera, keeping the rear exterior clean and tidy.
According to third-party parts information, mirror lower housings with camera holes are available, indicating that camera-related cover parts have standardized supply in the aftermarket. The Destroyer 05 comes standard with a backup camera across all trims, with higher trims featuring a 360° surround view system. As a protective component of the backup camera system, the rear camera cover is vulnerable to damage from reverse scrapes and high-pressure car wash impacts in daily use.
In daily use, the rear camera cover is located at the most protruding position at the rear of the vehicle, making it one of the most vulnerable parts to reverse impacts and scratches. Typical failures include cover cracking, broken clips, and surface scratches – causing camera looseness or water intrusion that affects backup image clarity.
Our product is strictly developed to original Destroyer 05 OE specifications, manufactured from modified PP polypropylene via injection molding with a black matte finish, consistent with original factory style. Clip holes and mounting positioning slots precisely match the original 1:1 for direct, no-modification replacement of damaged original parts.
The cover surface features a black matte finish, consistent with the Destroyer 05 lower rear bumper style, perfectly blending with the original appearance. Natural injection molding color – no painting required for installation with no peeling risk. UV stabilizers are added to the material – passes 500-hour xenon arc aging testing with no fading.
The cover features a clip-on mounting design – no tools required for installation. Simply align the cover with clip holes and press into place. Single cover replacement takes only 2-3 minutes and can be completed by one person without a professional technician.
Installation Instructions
Tool Preparation
| Tool Name | Purpose |
|---|---|
| Plastic pry tool | Remove old cover and clips |
| Clean cloth | Clean mounting area |
| New clip set (recommended) | Prevent looseness and noise |
Installation Steps
| Step | Operation | Key Points |
|---|---|---|
| 1. Remove Old Cover | Carefully pry the clip positions of the old cover with a plastic pry tool, remove the old cover from the rear bumper | Avoid scratching the bumper paint |
| 2. Clean Mounting Area | Clean dust and dirt from the mounting groove | Ensure the mounting surface is clean |
| 3. Inspect Camera | Check if the camera lens is clean – wipe if dirty | Use a soft cloth to avoid scratching the lens |
| 4. Replace Clips | Inspect clips – recommended to use new clips to prevent looseness | Old clips may break easily |
| 5. Install New Cover | Align the new cover with clip holes, press clips sequentially to secure | A "click" sound indicates proper installation |
| 6. Check Fixation | Confirm the cover is properly secured and flush with the rear bumper | Gently pull to check for looseness |
| 7. Test Camera | Shift to reverse, check if the backup camera image is clear and unobstructed | Ensure the image is normal |
Professional Tips
| No. | Tip Content |
|---|---|
| ✅ | Inspect the camera lens before installation – check for scratches or fog, clean or replace if necessary |
| ✅ | Ensure the camera is not obstructed after cover installation – maintain full field of view |
| ✅ | Use new clips for installation – old clips may cause looseness and noise |
Pre-Installation Checklist
-
New cover has no transport damage, scratches, or deformation
-
Camera lens is clean with no stains
-
New clips are ready
-
Confirm correct cover orientation (camera hole alignment)
Post-Installation Confirmation
-
Cover is flush with rear bumper, no looseness
-
Backup camera image is clear with no obstruction
-
No abnormal noise or looseness
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.