Flue Gas Total Hydrocarbon Analyzer CEMS FID Vocs Waste Gas Non Methane
Flue Gas Analyzer Cems FID Vocs Waste Gas Non-Methane Total Hydrocarbon Analyzer
>>Overview
The AG-NMHC07 Analyzer is a non-methane hydrocarbon (NMHC) emission monitoring system based on catalytic oxidation and flame ionization detection (FID) principles. It provides real-time measurement of total hydrocarbons (THC) and non-methane hydrocarbons (NMHC) concentrations in industrial flue gases. This analyzer is designed for monitoring organic compound emissions from stationary pollution sources across industries such as petrochemicals, chemical manufacturing, industrial coating, packaging/printing, rubber products, electronics, organic solvent production, automotive manufacturing, and others.
1. Full thermal method with high-temperature analysis throughout the process, effectively preventing sample loss and ensuring accurate and reliable monitoring data;
2. Fast response speed, short analysis cycle, and real-time data output;
3. Simple and quick calibration operation, with calibration time as short as 30 seconds;
4. Compliant with international standards and Chinese national standard HJ1013-2018;
5. 5U standard chassis design for easy integration;
6. Integrated high-temperature pump in the analyzer, supporting direct connection via heated tubing;
7. No carrier gas required;
8. Simultaneous monitoring of NMHC, THC, and CH4;
9. Automatic ignition and hydrogen cutoff after flame extinguishment, ensuring safety and reliability;
>>Technical parameters
| Manufacturer | JUGE | Model | AG-NMHC07 |
| Parameter | NMHC, THC, CH4 | Size | 500mm×482(435)mm×213mm (L×W×H) |
| Range | NMHC:(0-200)mgC/m3 |
Weight | 25.2kg |
| Detect limit | 0. 1mg/Nm3 | Working environment | (5~40)ºC (0~95)%RH |
| Analyzer Heating | 120ºC | Sample gas | 80kPa- 110kPa |
| Catalytic Temperature | 200ºC | Hydrogen Supply | Purity: ≥99.99% Source: Hydrogen cylinder or hydrogen generator Pressure: 0.2 MPa |
| Repeatability | ≤ 1% | Air Supply | Clean air, hydrocarbon concentration ≤0.3 mg/m³ Pressure: 0.4 MPa |
| Analysis Cycle | ≤ 10s(, 300s) | Drive gas | Dehumidified, dust-free, oil-free compressed air Pressure: 0.4 MPa |
| Zero Point Drift, Span Drift | ≤±2%F.S./24h | Calibration Gas | Methane/propane single-component or mixed standard gas Pressure: 0.2 MPa |
| Linear Error | ≤±1%F.S. | Power supply | 220 VAC ,50Hz |
| Catalytic Efficiency | ≥98% | Power Consumption | 500w , 150W |
| CH4 Retention Rate | ≥98% | Communication Protocol | Modbus |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.