Car Oxygen Sensor 36532RZA004/36532RZA014 For Honda
Price:
To Be Negotiated
MOQ:
50
Delivery Time:
1-4weeks
Brand:
RMOS
Product Description
Product Specifications
| OE Part Number | 36532-RZA-004 (also 36532RZA004) |
| Brand | HONDA (Genuine Original Equipment) |
| Product Type | Lambda Sensor (Oxygen / O₂ Sensor) |
| Position | Rear (Downstream / Post-Catalyst) |
| Other Names | Rear Oxygen Sensor, Sensr Middle Oxygen |
| Sensor Type | Heated switching-type oxygen sensor (zirconia electrode) |
| Number of Wires | 4 |
| Thread Size | M18 × 1.5 |
| Wrench / Spanner Size | 22 mm (7/8″) |
| Mounting Type | Thread-in / Flange Mount |
| Installation | Direct-fit; pre-greased thread for quick and easy replacement |
| Quality Standard | Genuine Honda OEM part, made to factory specifications |
| Manufacturer Warranty | Minimum of 12 Months |
Technical Notes
- This is a 4-wire heated oxygen sensor manufactured to Honda's original equipment standards. The four wires serve two independent circuits — two for the internal heater and two for the sensor signal and ground.
- The built-in heating element quickly brings the ceramic sensing tip up to operating temperature after a cold start, enabling the ECU to enter closed-loop fuel control sooner and reduce cold-start emissions.
- The sensor functions as a rear (downstream / post-catalyst) diagnostic probe. It is installed after the catalytic converter and monitors catalyst efficiency by comparing its signal with the upstream sensor.
- The sensor uses a zirconia electrode, which is electrically conductive at high temperatures. It generates a voltage based on the oxygen concentration difference between the exhaust gas and outside air.
- As a direct-fit component, it features a vehicle-specific electrical connector and pre-terminated wiring, eliminating the need for cutting or splicing during installation.
- Genuine Honda OEM parts are designed, engineered, and tested to rigorous Honda standards, ensuring proper fit, function, and durability.
Cross-Reference & Interchange Numbers
This Lambda Sensor is a genuine Honda Original Equipment component. The following part numbers are directly interchangeable or closely related. Always verify physical fitment (connector shape, cable length and thread size) with your original part before purchasing.
| Primary OE Number | 36532-RZA-004, 36532RZA004 |
| Related Honda OE Number | 36532-RZA-014 (36532RZA014) |
| Aftermarket Interchange | 234-4359, 2344359 |
| Aftermarket Interchange | 15318 |
| Aftermarket Interchange | 24266, 250-24799, 350-34129 |
| Aftermarket Interchange | 5S9192, 75-3894 |
| Aftermarket Interchange | 800 21116 039, 800 21116 065 |
| Aftermarket Interchange | AP4-690, ES20380 |
| Aftermarket Interchange | KN4-690, OS5574, SU10654 |
Cross-Reference Notes
- The OE number 36532-RZA-014 is a closely related variant used on the same Honda applications.
- 234-4359 is the most widely documented aftermarket equivalent.
- 15318 is another aftermarket interchange number documented for this OE fitment.
- Always physically compare your old sensor's connector shape, pin count (4), and thread size (M18 × 1.5) before purchasing.
Vehicle Compatibility
Important Position Note: This is a rear (downstream / post-catalyst) oxygen sensor — installed after the catalytic converter. Do not use it in the upstream (pre-catalyst / front) position unless your vehicle's original sensor was located there. Upstream and downstream sensors are not interchangeable on most vehicles.
Honda Applications
| Model | Year Range | Engine | Position / Notes |
| CR-V | 2007 - 2009 | 2.4L L4 (K24Z1 / K24Z6) | Rear (Downstream / Post-Catalyst) |
Detailed Vehicle Fitment
| Year | Make | Model | Body & Trim | Engine |
| 2009 | Honda | CR-V | EX, EX-L, LX | 2.4L L4 - Gas |
| 2008 | Honda | CR-V | EX, EX-L, LX | 2.4L L4 - Gas |
| 2007 | Honda | CR-V | EX, EX-L, LX | 2.4L L4 - Gas |
Fitment Notes
- This is a rear (downstream / post-catalyst) oxygen sensor for the Honda CR-V.
- The part is specifically listed for Japan-built CR-V models.
- Compatible with CR-V trims: EX, EX-L, and LX.
- How to verify: Locate your vehicle's catalytic converter. This sensor is installed in the pipe after the catalytic converter. If your faulty sensor is located before the converter, this part is not suitable for your application.
- Not compatible with diesel engines — diesel applications use different sensors with different calibration parameters.
- The vehicle fitment information above is a guide only. Always confirm compatibility using your vehicle's VIN or by physically inspecting your old sensor's position (rear / downstream), connector shape, and thread size before ordering.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Ruimin Electronic Technology Co., Ltd.
Location
Second Floor, No. 4 Building, No. 1666, Ningxi Road, High-Tech District,Hefei,Anhui,China
Contact Person
Mark