Electric Hatchback Suv Tail Lights Car Rear Brake Light For Zeekr 001 2021-2026
660017860 660017861 660017862 Tail lights For Zeekr 001 Brake Light Turn Signal Position Light Reverse Light
Description
| Specification | Details |
|---|---|
| Product Name | Zeekr 001 Rear Tail Light Assembly |
| Power | 18W |
| OEM Number | 660017860/ 660017861/ 660017862 |
| Lens Material | High-Grade PC with UV Coating |
| Suitable For | Zeekr 001 (2021–2026 Models) |
| Housing Material | Black ABS Plastic |
| Waterproof Grade | IP67 Waterproof & IP6X Dustproof |
| Functions | Brake Light, Turn Signal, Position Light, Reverse Light |
| Temperature Resistance | -40°C ~ +85°C |
| Shock Resistance | Impact-Resistant Structure (≥10J) |
1.Hardware Compatibility & Engineering Standards
This assembly is manufactured to the exact spatial and electrical tolerances required by the 2021–2026 Zeekr 001 chassis. To ensure the component integrates perfectly with your vehicle's BCM (Body Control Module), please verify your current housing against the following OEM production identifiers:
Driver-Side (Outer): 660017860
Passenger-Side (Outer): 660017861These units are calibrated to map directly to the factory mounting architecture. This ensures a tension-free installation that maintains a flush profile with the rear quarter panel, eliminating the gaps and aerodynamic inconsistencies often introduced by generic aftermarket parts.
2. Advanced Environmental & Optical Shielding
To address the premature wear common in high-output LED assemblies, we have reinforced the housing with industrial-grade materials:
Thermal Regulation: The housing features an integrated thermal-dissipation matrix that prevents the LED array from undergoing heat-soak. This stability is critical for the Zeekr’s rear lighting to maintain uniform intensity without the flicker often caused by solder joint degradation.
Hermetic Sealing: Each assembly is factory-tested to IP67 (waterproof) and IP6X (dustproof) standards. By creating a vacuum-sealed environment for the internal optics, the module is effectively shielded from environmental debris and humidity, preventing the interior "fogging" or "graying" that plagues standard housings.
Photometric Consistency: The lens utilizes a high-clarity Polycarbonate (PC) substrate with a specialized UV-stabilizer layer. This ensures that the light diffusion pattern remains consistent, providing the wide-angle visibility required for safe signaling during both rapid braking maneuvers and low-visibility nighttime conditions.
3. Diagnostic-Grade Installation Logic
This module is designed for "non-destructive restoration," allowing for an owner-level installation that mimics dealership-quality results.
Electrical Handshake: The harness features a factory-spec connector that interfaces directly with the Zeekr’s 12V body harness. This ensures that the vehicle’s diagnostic system recognizes the load impedance immediately, preventing "lamp-out" errors or false dashboard warnings.
Efficiency: The assembly maintains the precise 4-function output (Brake, Turn, Position, and Reverse) with an energy-efficient power draw.
Execution: Because the unit utilizes native mounting pins, the entire swap is executed using standard hand tools—requiring zero wire splicing, drilling, or permanent modifications to the vehicle's bodywork.
Comprehensive Service Assurance & Technical Support
We view our role as more than a parts supplier; we are your technical partner in vehicle restoration. When you install our lighting modules, you are backed by a structured support framework designed to ensure long-term reliability and peace of mind.
12-Month Performance Guarantee
Every lighting assembly is protected by a 1-year performance assurance window. This coverage specifically targets the integrity of the manufacturing process, protecting you against unexpected diode array failure, internal circuit malfunctions, or seal degradation under typical road-use conditions. Our aim is to ensure the component performs with the same fidelity as the factory-original equipment throughout its operational life.
Streamlined Support & Resolution
Should you encounter a performance discrepancy, we favor direct resolution over complex bureaucratic claims. Our internal support team is equipped to provide rapid diagnostics based on your specific setup. If a hardware fault is identified, we prioritize swift remediation—whether through detailed troubleshooting, a prioritized component replacement, or a transparent refund process. We encourage you to initiate this dialogue within 30 days of discovery so we can rectify the situation with minimal delay.
Returns & Exchange Efficiency
We understand that precision is key in automotive upgrades. If a shipping error occurs or if the item arrives with handling irregularities, we facilitate a return or swap within 30 days of delivery. To maintain our high quality-control standards, we request that the unit be returned in its original, pristine, and uninstalled state with all factory packaging. This allows us to process your request promptly and return the unit to our evaluation cycle for continuous improvement.
Dedicated Installation Consultation
Our support extends beyond the warranty period. Whether you require clarification on the electrical harness compatibility or need technical guidance during the physical swap, our support staff is available to answer your fitment inquiries. By bridging the gap between hardware supply and hands-on installation, we ensure that your vehicle restoration is completed with the highest degree of confidence.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.