OEM Car Fog Light Lamps Accessories For Tank 400 Hi4-T IP67 Dustproof
ABS+PC Housing IP67 Anti-shock Front Fog Light Tank 400 Hi4-T
Technical Specs
|
Parameter
|
Details
|
|---|---|
|
Housing Material
|
Black ABS+PC Composite Plastic
|
|
OEM Number
|
1118300-ED01A / 1118300-ED02A
|
|
Shock & Vibration Resistance
|
≥12J Impact Resistance, OEM-level Anti-vibration
|
|
Temperature Range
|
-40°C ~ +85°C Extreme Weather Resistance
|
|
Service Life
|
30,000 Hours Long Lifespan
|
|
Fitment Model
|
Tank 400 Hi4-T
|
|
Power
|
8W ± 0.3W Per Single Fog Light
|
|
Product Type
|
Original LED Front Fog Light Assembly (Left/Right)
|
|
IP Rating
|
IP67 Waterproof & Dustproof
|
|
Lens Material
|
High-grade PC Lens with UV-resistant Coating
|
Description
This replacement front fog light component is manufactured to align with factory part numbers 4116110P00A1 for the left/driver side and 4116120P00A1 for the right/passenger side. Engineered for the 2024–2026 Tank 400 Hi4-T off-road platform, the casing dimensions match the original front bumper mounting positions. This structural parity allows for direct installation utilizing factory mechanical bolting alignment points, preserving original panel margins without requiring body custom tracking or structural frame modifications.
The external light lens is constructed from optical-grade polycarbonate (PC), reinforced with an anti-UV polymer surface layer to reduce photo-oxidation. This chemical matrix helps shield the clear lens from scratching, solar yellowing, and optical clouding caused by prolonged sun exposure and flying trail debris. By maintaining transparent lumen transmission over extended road use, the assembly ensures steady visibility while integrating with the rugged exterior design lines of the front fascia.
To protect internal circuit components during wilderness overlanding and muddy trail transits, the assembly features a certified IP67 waterproof and dustproof sealing perimeter. This sealing system isolates the internal LED arrays from heavy rain, snow, and temporary water exposure. The integration of an original-equipment-style breathable membrane regulates pressure shifts, reducing capillary moisture tracking and preventing internal fogging or lens condensation during sudden temperature changes.
Equipped with a native connector design, this fog lamp plugs directly into the Tank 400 Hi4-T factory wiring harness without requiring wire slicing or harness alterations. The internal load resistance is calibrated to function within the vehicle's standard hybrid electrical architecture, communicating smoothly with onboard body control modules to ensure immediate activation while preventing diagnostic trouble codes or turn indicator hyper-flashing.
Each replacement unit is calibrated to project 600–800 lumens of focused, low-glare illumination optimized for severe weather visibility. The internal reflector geometry shapes a low-slung, wide-angle beam distribution designed to cut beneath dense fog, dust storms, and heavy rain barriers. This scattering pattern illuminates road margins and terrain obstacles clearly, assisting driver navigation in low-light environments without directing blinding glare toward oncoming traffic.
BYD Tank 400 Hi4-T (2024–2026): Dual Fitment Application & Technical Verification Guidelines
Direct Service Component Replacement Protocol
This front fog light assembly is engineered to function as a direct service replacement for damaged, faded, or moisture-compromised factory fog lamps on the Tank 400 Hi4-T. The housing profiles align with the original mounting frameworks inside the rugged front bumper, restoring standard illumination performance and matching original factory panel margins without requiring custom modifications to the vehicle's structural framing or hybrid electrical wiring.
Base Model Hardware Integration Pathway
For specific Tank 400 Hi4-T trim configurations that were not equipped with operational front fog illumination from the factory, this component utilizes the pre-molded bumper structural bays to execute an original-equipment-style hardware integration. The mounting points match the native bumper openings, allowing fleet operators and owners to install the complete lighting system while maintaining the intended mechanical design lines and armor-style aesthetics of the front fascia.
Vehicle Compatibility Verification Mandates
Due to subtle exterior design variations, model years, and powertrain trim packages across off-road vehicle series, buyers must verify specific application data prior to logistics dispatch. Please confirm your vehicle production timeline, front bumper version, and original equipment part numbers before finalizing your order. For definitive application tracking, please provide your seventeen-digit Vehicle Identification Number (VIN) to our support desk, enabling our engineering team to complete an asset catalog cross-reference to confirm parts compatibility before cross-border shipping.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.