UV50 Resistance Led Rear Bumper Reflector Light Car For BYD Yuan Plus ATTO 3 12V
12V UV50+ Resistance Rear Bumper Reflector Light For BYD Yuan Plus ATTO 3 SA2-4135100A SA2-4135200A
Description
| Specification | Details |
|---|---|
| Product Name | Rear Bumper Reflector |
| Color Specification | Transparent Red |
| OEM Numbers | SA2-4135100A / SA2-4135200A |
| Housing Material | ABS Engineering Plastic |
| Suitable For | BYD Yuan Plus / ATTO 3 |
| Mounting Side | Rear Bumper Reflector |
| Lens Material | PC Polycarbonate with Anti-UV Coating (UV50+) |
| Installation Method | Pure OEM Clip-On Replacement, No Wiring or Drilling Required |
| Temperature Resistance | -40°C ~ +85°C |
| Light Source | No built-in light source |
100% OEM Fit for BYD Yuan Plus / ATTO 3
Produced strictly following original factory dimensions and reserved mounting positions for BYD Yuan Plus and ATTO 3, this reflector is a standard OEM matching part with official part numbers SA2-4135100A and SA2-4135200A. No modification, drilling or extra accessories are needed. It clips onto the rear bumper smoothly just like the original part, perfectly retaining the vehicle’s sleek appearance and aerodynamic design. It fits tightly without uneven gaps, being a great choice to replace faded, cracked or damaged original reflectors.
Passive Safety Upgrade for Low-Visibility Conditions
This reflector is designed without built-in light sources, which is in line with original factory practical design. Equipped with high reflective PC lens, it can reflect light from following vehicles to clearly display your car position at night, in rainy or foggy weather. Since BYD Yuan Plus and ATTO 3 run quietly as electric SUVs, this extra visible auxiliary design helps lower the possibility of rear-end collisions and offers safer driving experience for daily commutes and highway trips.
Built to Withstand Any Weather & UV Exposure
The lens is made of premium PC polycarbonate covered with UV50+ anti-ultraviolet coating, which can effectively prevent yellowing and discoloration after long-term outdoor use. The outer housing is made of solid ABS engineering plastic, and the whole unit features IP67 waterproof and dustproof performance. It works steadily in heavy rain, regular car washing and humid environments, and adapts to temperatures ranging from -40°C to 85°C without cracking or deforming under extreme weather.
No-Wiring, No-Drill Installation
You do not need professional tools or complicated wiring work for installation. This reflector applies the same clip-on fixing structure as original factory parts. No drilling, gluing or wiring connection is required. Even beginners with no car repair experience can complete the installation of left and right reflectors easily within 5 minutes.
Long-Lasting, Low-Maintenance Performance
Unlike cheap aftermarket reflectors that age and damage quickly, this product is manufactured in accordance with OEM quality standards. The anti-UV coating keeps the lens clear and maintains stable reflection effect, and the sturdy structure resists surface scratches and impact from road debris. It requires no power supply and nearly zero daily maintenance, enabling stable long-term use and securing your daily driving safety easily.
Prep the Area
Start by fully turning off your BYD Yuan Plus and ATTO 3. Get a soft clean cloth and wipe clean the mounting positions on both sides of the rear bumper to clear away dirt and dust. Tidying up these spots allows the new reflectors to clip steadily without any foreign objects affecting the fitting effect.
Remove the Old Reflectors
Find the original fixed clips that secure the original reflectors. Wrap a flathead screwdriver with a soft cloth to avoid leaving scratches on the bumper, then gently push the release tabs. After releasing the lock, pull the old reflectors straight out slowly. They can be detached easily with little effort.
Install the New Reflectors
Align the new left reflector with the reserved installation opening on the rear bumper, then press it steadily until you hear an obvious click sound, which means it is well locked in place. Follow the same operation to install the right reflector, and confirm both accessories fit closely with the bumper surface.
Final Check
Give each reflector a slight pull to confirm it is firmly installed. Check the rear part of the car carefully to make sure there are no gaps or loose parts. This installation method does not need any adhesive, so you can use the car normally right after installation. It is advisable to avoid high-pressure car washing within 24 hours to keep the clips in stable connection.
Before you buy, make sure to confirm your BYD Yuan Plus/ATTO 3’s model year and the OEM part numbers (SA2-4135100A / SA2-4135200A) to avoid mismatches. If you’re not sure about compatibility, just send us a photo of your original rear bumper—our team will verify it for you quickly.
Avoid leaving the reflector in prolonged high temperatures or near open flames. This can damage the anti-UV coating on the lens or warp the ABS housing, which will reduce its reflective performance and overall lifespan.
To keep the reflector working its best, clean the lens regularly with a soft, non-abrasive cloth and mild soap. Avoid using harsh chemicals or spraying the lens directly with a high-pressure washer—these can scratch or damage the reflective surface.
We offer a 6-month warranty for manufacturing defects—things like premature fading, cracking, or fitment problems. If you run into any issues with your reflectors, our support team is here to help fix them quickly.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.