148x21mm Decorative WPC Board Wall Cladding Interior Exterior UV Resistance

Cost Effective WPC Cladding Reduces Bulk Project Budgets

This traditional first-generation WPC cladding offers a high-strength, solid wood-fiber matrix that delivers a rustic timber look at a fraction of the cost of real wood. Perfect for large-scale, budget-driven commercial facades, it provides a stable exterior finish without the upfront high expense of capped composites.

• Ultra-Competitive Sourcing Cost
  The streamlined single-extrusion process lowers factory production overhead, allowing wholesalers to maximize profit margins on competitive commercial tenders.
• 100% Solid Full-Body Sanded Finish
  With no plastic-looking outer shield, the entire board is sanded to expose real wood fibers, giving it a natural matte texture and excellent anti-glare properties.
• Easy Onsite Sanding and Repair
  Because the color and material are uniform throughout the board, any deep scratches from construction can be easily erased with standard sandpaper.

Installing the Joists:

If the cladding panels are installed horizontally, the joists must be installed vertically (and vice versa). Fix the joists to the wall using expansion screws. Keep the center-to-center distance between the joists at 30cm - 35cm (if the spacing is too wide, the wall will sag or flex).

Fixing the First Panel:

Start from the bottom or the side. Use a starter clip (or screws) to secure the edge of the first panel to the joists. Make sure to double-check that this first piece is perfectly level or vertical.

Interlocking & Securing:

Insert the tongue (male profile) of the next panel into the groove (female profile) of the previous one. Snap the dedicated fixing clip onto the exposed joint where the panel meets the joist, and tighten the screw. Repeat this process, stacking them like building blocks.

Finishing & Trimming:

Cut the final panel to fit the remaining space. Cover and seal all perimeter edges and corners using matching L-shape corner trims.