150x50mm Eco Friendly WPC Tube Composite Cladding Lamianted Surface Treatment
Price:
$1.8-2.3or negotiation
MOQ:
400pcs or negotiation
Delivery Time:
7-11 working days
Brand:
Haining Vanshine
Product Description
150x50mm Eco Friendly WPC Tube Composite Cladding Laminated Surface Treatment
Product Summary
Fabricated from recycled wood fibers, this eco-friendly WPC tube cladding system supports sustainable building standards. Shipping with direct factory supply guarantees international purchasing agents uniform batch quality control and competitive wholesale pricing.
Product Features
-
Green Building Project Certified Eco CompositionComposed of reclaimed wood sawdust and clean recycled polymers reducing deforestation footprints and securing eco points for your construction.
-
Streamlined Direct Factory Price QuotesBuying straight from the manufacturer floor gives you uncompromised cost structures that amplify your localized market retail profit.
-
100 Percent Recyclable Building ProfileEnhances your environmental portfolio as all scrap pieces can be safely reprocessed without creating hazardous landfill waste.
-
Transparent Lead Times and Mass ProductionDirect factory scheduling means you get real-time updates directly from the extrusion shop floor ensuring no delivery surprises.
Performance Advantages
Technical Specifications
| NO. | Test Items | Requirements | Results | Test Methods |
|---|---|---|---|---|
| 1 | Surface abrasion resistance,g/100r | ≤0.15,and the paint film is not worn through | 0.100 | ✔pass |
| 2 | Colour fastness to light, class | Gray Card≥4 | 4 | ✔pass |
| 3 | Formaldehyde emission,mg/m³ | ≤0.05 | Not detected | ✔pass |
| 4 | Minimum concentrated load, N | ≥3400 | 3492 | ✔pass |
| 5 | Static bending strength,MPa | ≥26.0 | 26.5 | ✔pass |
| 6 | Elastic modulus, MPa | ≥3000 | 4600 | ✔pass |
| 7 | Water absorption, % | ≤1.0 | 0.9 | ✔pass |
| 8 | Falling hammer impact at low temperature | No crack at the temperature of -10°C | pass | ✔pass |
| 9 | Anti-slippery value | ≥35 | 36 | ✔pass |
Certification
Colors
How to Install
-
Jointing Methods
- Connector joint: Use matching metal/plastic internal/external connectors. Pre-drill holes + fix with stainless steel self-tapping screws.
- Adhesive bonding: Apply WPC-specific adhesive/structural glue. Clean → glue → join → clamp → cure (24h).
- 45° miter joint: Cut ends at 45° for corners; secure with angle brackets and screws.
-
Fixing Methods (Wall/Ceiling/Partition)
- Clip-on (quick install): Use aluminum spring clips to attach directly to metal studs/frames; no screws, removable.
- Bracket/angle fix: Use stainless steel L-brackets. Pre-drill tube walls, fasten to wall/ceiling substrate.
- Pipe clamps/hangers: For horizontal runs, use U-clamps/hangers on light steel keels; spacing ≤ 60cm.
- Post mounting (fence/grille): Embed posts in concrete or fix to ground with flange plates + expansion bolts.
-
Key Installation Tips
- Cutting: Use fine-tooth saw/circular saw; keep cuts clean and deburred.
- Expansion gap: Leave 3-5mm between tubes for thermal expansion.
- Pre-drill: Always pre-drill before screwing (hole ≈ 3/4 screw diameter) to avoid cracking.
- Drainage: Install outdoor tubes with slight slope or drill drain holes to prevent water buildup/mold.
Section Designs
Our Factory
FAQ
Q1: What percentage of recycled material is inside this eco friendly WPC tube?
A1: Our composition features 60% reclaimed natural wood fiber, 30% recycled high density polymers, and 10% essential eco additives.
Q2: Does ordering direct factory supply mean I can customize unique colors?
A2: Yes, because you are buying direct, we can formulate customized color matches to fit your corporate design requirements for wholesale volume orders.
Q3: Does the recycled fiber compromise the mechanical strength of the cladding?
A3: No, the timber fibers undergo intense heat refinement blending flawlessly with polymers to deliver superior high impact strength.
Q4: Can we schedule a real time video inspection of your production plant?
A4: Absolutely, we welcome live video workshop tours via online meetings to show our massive extrusion lines and raw material compounding setup.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Haining Vanshine New Materials Co., Ltd.
Location
No.88 Sanyou Road, Tongyuan Town, Haiyan, Zhejiang, China
Contact Person
Huang