160mm Width Industrial Interior WPC Wall Panel 500kg/m2 Load Capacity 85°C Heat Resistant
160 Heat-Resistant 85°C Interior WPC Wall Panel with 500kg/m² Load Capacity
Product Summary
This industrial-grade Interior WPC Wall Panel features an optimized 85°C heat-resistant polymer core and a certified 500kg/m² load capacity structure. Engineered for sunrooms, tropical zone resorts, and high-impact commercial public spaces, it effectively prevents thermal warping under extreme heat while delivering outstanding structural strength. It provides B2B global sourcing managers with an ultra-stable, heavy-duty interior cladding solution.
About this Product
-
85°C Thermal Stability & Heat Resistance :
-
Formulated with an advanced thermo-stabilized crystalline polymer matrix, the panel maintains structural integrity under temperatures up to 85°C. It eliminates thermal expansion, buckling, or bubbling even when exposed to intense window-side heat.
-
-
500kg/m² Heavy-Duty Load Capacity :
-
Utilizing thickened high-density internal compression ribs, this panel delivers a certified 500kg/m² load capacity. It resists heavy crushing forces and structural deformation in high-traffic public commercial areas.
-
-
Zero Buckling in Sun-Drenched Spatial Designs :
-
Thanks to its high 85°C heat-resistant properties, this WPC panel has a thermal expansion coefficient near zero. It ensures that seamless wall installations stay perfectly flush and flat throughout hot summers in tropical climates.
-
-
High Resistance to Heavy Commercial Squeeze :
-
The 500kg/m² load capacity structure prevents the fluted wall surface from flattening or collapse when heavy commercial furniture, pallets, or public seating lines are pushed hard against the wall cladding.
-
Technical Specifications
| No. | Test Item | Test Method | Specification & Performance |
| 1 | Material Composition | Manufacturing Standards | 60% Reclaimed Hardwood Fiber + 30% Eco-HDPE + 10% Non-toxic Additives |
| 2 | Formaldehyde Emission | EN 717-1 / SGS | ≤ 0.05 mg/m³ (EU E0 Standard / Passed) |
| 3 | Water Absorption Rate | ASTM D1037 | ≤0.5%(24-hour full immersion testing) |
| 4 | Fire Retardancy Rating | EN 13501-1 | Class B-s1, d0 (Self-extinguishing, low smoke density) |
| 5 | Linear Thermal Expansion | ASTM D696 | ≤0.15% (Under severe global temperature changes) |
| 6 | Colorfastness (UV Aging) | ISO 105-A02 / ASTM | Grade ≥4 (After 2,000 hours of accelerated xenon-arc exposure) |
| 7 | Heavy Metals & SVHCs | RoHS 2.0 / REACH | 0% Detected (Lead, Mercury, Cadmium, Asbestos free) |
Certification
Performance Advantages
Colors
Section Designs
Our Factory
FAQ
Q1: Can this 85°C heat-resistant WPC panel be installed directly behind a kitchen stove or commercial heater?
Answer: Yes, it can be safely installed in high-temperature ambient zones because of its 85°C heat-resistant core. However, to comply with global fire codes and safety regulations, it should not have direct, continuous contact with open blue flames. A safe clearance or a backsplash layer is recommended if used immediately behind a high-BTU kitchen stove.
Q2: How do you verify the 500kg/m² load capacity? Is it safe against heavy point-impacts?
Answer: The 500kg/m² load capacity refers to uniform static pressure tested via hydraulic compression plates. For sharp, high-velocity point-impacts, the internal thickened ribs effectively distribute the kinetic energy across the panel network, minimizing localized cracking better than standard brittle hollow PVC materials.
Q3: Does the heat-resistant formula make the panel brittle or difficult to cut during winter installation?
Answer: Not at all. Our formulation co-extrudes the 85°C heat-resistant additives alongside premium impact modifiers. This balanced combination ensures that the panel remains flexible and highly machineable, cutting smoothly with standard miter saws without chipping, even in cold freezing winter temperatures.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.