Waterproof WPC Tube Fencing Batten With Anti Rot Guarantee
Ideal for wet climates and swimming pool enclosures, this waterproof WPC tube operates as a durable fencing batten. Sold with an ironclad anti-rot guarantee, it offers global developers peace of mind against water logging and fiber decay.
- Zero Moisture Absorption Performance: High-density waterproofing barriers ensure the composite material remains completely impervious to torrential rain and constant moisture.
- Comprehensive Anti-Rot Factory Promise: Backed by our written guarantee ensuring the fencing panels will never splinter, break down, or dissolve due to wood rot or fungal attack.
- Perfect Poolside Boundary Enclosure: Handles persistent water splashing and heavy morning dew effortlessly, maintaining pristine structural neatness over a decade.
- Elimination of Costly Rot Replacements: Eradicates the financial drain of replacing rotten traditional wooden fence pickets every few seasons, providing long-term maintenance savings.
- Connector joint: Use matching metal/plastic internal/external connectors. Pre-drill holes + fix with stainless steel self-tapping screws.
- Adhesive bonding: Apply WPC-specific adhesive/structural glue. Clean → glue → join → clamp → cure (24h).
- 45° miter joint: Cut ends at 45° for corners; secure with angle brackets and screws.
- Clip-on (quick install): Use aluminum spring clips to attach directly to metal studs/frames; no screws, removable.
- Bracket/angle fix: Use stainless steel L-brackets. Pre-drill tube walls, fasten to wall/ceiling substrate.
- Pipe clamps/hangers: For horizontal runs, use U-clamps/hangers on light steel keels; spacing ≤ 60cm.
- Post mounting (fence/grille): Embed posts in concrete or fix to ground with flange plates + expansion bolts.
- Cutting: Use fine-tooth saw/circular saw; keep cuts clean and deburred.
- Expansion gap: Leave 3-5mm between tubes for thermal expansion.
- Pre-drill: Always pre-drill before screwing (hole ≈ 3/4 screw diameter) to avoid cracking.
- Drainage: Install outdoor tubes with slight slope or drill drain holes to prevent water buildup/mold.
| NO. | Test Items | Requirements | Results | Test Methods |
|---|---|---|---|---|
| 1 | Surface abrasion resistance,g/100r | ≤0.15,and the paint film is not worn through | 0.100 | ✔pass |
| 2 | Colour fastness to light, class | Gray Card≥4 | 4 | ✔pass |
| 3 | Formaldehyde emission,mg/m³ | ≤0.05 | Not detected | ✔pass |
| 4 | Minimum concentrated load, N | ≥3400 | 3492 | ✔pass |
| 5 | Static bending strength,MPa | ≥26.0 | 26.5 | ✔pass |
| 6 | Elastic modulus, MPa | ≥3000 | 4600 | ✔pass |
| 7 | Water absorption, % | ≤1.0 | 0.9 | ✔pass |
| 8 | Falling hammer impact at low temperature | No crack at the temperature of -10°C | pass | ✔pass |
| 9 | Anti-slippery value | ≥35 | 36 | ✔pass |
A1: Yes, the chemical composition is completely immune to marine salt air corrosion, making it highly popular for beachfront fencing.
A2: For optimal structural stability and wind resistance, we advise a maximum post center-to-center span distance of 1.2 meters.
A3: In the highly unlikely event of physical rot under normal conditions, we will replace the affected profiles completely free of charge.
A4: No staining or sealing is ever required. The outer shell contains built-in pigmentation that remains vivid without topical treatments.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.