Termite Resistance WPC Hollow Tube Garden Louvre Waterproof With Quick Installation Guide

Termite Resistance WPC Tube Garden Louvre With Quick Installation Guide

Product Summary

Tailored for damp park landscaping this termite resistance WPC tube garden louver protects park partitions from insect damage. Supplied with a comprehensive quick installation guide it enables local assembly crews to mount profiles without errors.

About this Product

Engineered Immunity to Subterranean Termites

Contains non organic materials woven into the matrix making the garden louvers entirely inedible to wood boring pests.

Foolproof Assembly via Quick Installation Guide

The detailed illustrated manual takes away the guesswork reducing alignment trial and error and cutting site labor hours significantly.

Perfect Longevity for Ground Contact Areas

Ideal for garden screen walls that sit close to insect rich wet soil ensuring the profile stays intact without pest hollow out failures.

Reduced Training Costs for Landscape Contractors

The combination of pre shaped profiles and a step by step guide allows smaller crews to finish park screens with minimal training.

Performance Advantages

How to Install

1) Jointing Methods

• Connector joint: Use matching metal/plastic internal/external connectors. Pre-drill holes + fix with stainless steel self-tapping screws.

• Adhesive bonding: Apply WPC-specific adhesive/structural glue. Clean → glue → join → clamp → cure (24h).

• 45° miter joint: Cut ends at 45° for corners; secure with angle brackets and screws.

2) Fixing Methods (Wall/Ceiling/Partition)

• Clip-on (quick install): Use aluminum spring clips to attach directly to metal studs/frames; no screws, removable.

• Bracket/angle fix: Use stainless steel L-brackets. Pre-drill tube walls, fasten to wall/ceiling substrate.

• Pipe clamps/hangers: For horizontal runs, use U-clamps/hangers on light steel keels; spacing ≤60cm.

• Post mounting (fence/grille): Embed posts in concrete or fix to ground with flange plates + expansion bolts.

3) Key Installation Tips

• Cutting: Use fine-tooth saw/circular saw; keep cuts clean and deburred.

• Expansion gap: Leave 3–5mm between tubes for thermal expansion.

• Pre-drill: Always pre-drill before screwing (hole ≈ 3/4 screw diameter) to avoid cracking.

• Drainage: Install outdoor tubes with slight slope or drill drain holes to prevent water buildup/mold.

Technical Specifications

Certification

Colors

Section Designs

Our Factory

FAQ

Q1: Do we need to apply anti termite chemical fluids on the raw cut ends of the WPC tube?

 A1: No the termite resistance is completely homogenous throughout the whole composite mix so cutting any side exposes the same insect proof density.

Q2: In what format is your quick installation guide supplied to buyers? 

A2: We provide printed illustrated step booklets inside the hardware packaging boxes alongside clear 3D alignment drawings for immediate reference.

Q3: Can this garden louver tube handle high humidity conditions near outdoor water fountains? 

A3: Yes the heavy poly-composite matrix is designed to endure wet spray conditions around garden water fountains without rotting or peeling.

Q4: What tools are required to follow the quick installation system successfully? 

A4: Standard construction site gear like an electric screwdriver crosshead screws measuring tape and a spirit level are all you need.