WP24-180B10 Mixer Truck High Flow Wash Pump Cast Aluminum Alloy For Heavy Duty Truck
Price:
Negotiable
MOQ:
10 PCS
Delivery Time:
15 days
Brand:
UNC
Product Description
WP24-180B10 Mixer Truck High Flow Wash Pump Cast Aluminum Alloy For Heavy-Duty Truck
Material Specifications
| Component | Material | Key Properties |
|---|---|---|
| Pump Body / Housing | Cast Aluminum Alloy | Lightweight, corrosion resistance, heat dissipation |
| Impeller | Reinforced PPO / Glass Fiber Nylon | High strength, wear resistance, anti-clogging |
| Motor Shaft | Stainless Steel (SUS 304/410) | Rust prevention, high torque durability |
| Mechanical Seal | Ceramic / Carbon / NBR | Leak-proof, friction resistance, long service life |
| Motor Winding | 100% Pure Copper | High conductivity, overheat protection |
| Seals & O-rings | EPDM / Nitrile Rubber (NBR) | Water tightness, chemical resistance |
| Fasteners (Bolts/Screws) | Stainless Steel / Galvanized Steel | Weatherproof, oxidation resistance |
| Mounting Base | Powder-Coated Carbon Steel | Structural rigidity, vibration damping |
Description
The WP24-180B10 features a cast aluminum housing with a stainless steel shaft and reinforced plastic impellers to ensure lightweight durability and superior corrosion resistance in harsh washing environments.
Notices:
- Dry Running Prohibited: Never operate the pump without water, as running dry will cause permanent damage to the mechanical seals and impeller.
- Voltage Compliance: Ensure a stable 24V DC power supply; incorrect voltage may lead to motor burnout or significantly reduced performance.
- Filtration Requirement: Always use a suction strainer or filter to prevent debris and sand from entering the pump body and clogging the internal components.
- Duty Cycle Limits: Strictly follow the recommended continuous runtime to prevent the motor from overheating during heavy-duty cleaning tasks.
- Winterization/Drainage: In freezing conditions, drain all residual water from the pump head after use to prevent the housing from cracking due to ice expansion.
- Regular Inspection: Periodically check the electrical connections and mounting bolts for tightness, as mixer trucks are subject to high vibration levels.
Applications:
The WP24-180B10 is primarily designed for high-pressure rinsing of concrete mixer drums, discharge chutes, and vehicle exteriors to prevent cement buildup and maintain fleet cleanliness in demanding construction environments.
FAQ
- Q: Can this pump be used with a 12V battery system?
- A: No, this model is specifically designed for a 24V DC power supply; using 12V will result in insufficient power or failure to start.
- Q: What should I do if the pump fails to prime or suck water?
- A: Check for air leaks in the inlet hose, ensure the suction height is within limits, and verify that the pump head is filled with water (pre-primed) before operation.
- Q: Is it safe to use this pump with recycled water or chemicals?
- A: While it handles construction water well, you must use a filter to block solids; avoid harsh acids or flammable liquids that could damage the internal seals and impeller.
- Q: How long can the pump run continuously?
- A: It is designed for intermittent cleaning tasks; it is recommended to let the motor rest after 15–20 minutes of continuous use to prevent overheating.
- Q: Why is the water pressure lower than expected?
- A: This is usually caused by a clogged intake filter, a low battery charge, or a worn-out mechanical seal that requires replacement.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Guangzhou Jinnaide Automotive Parts Co., Ltd
Location
841, Lane 5, Xinguangcong Auto Parts, Baiyun Avenue North, Baiyun District, Guangzhou City, Guangdong Province
Contact Person
chan



