HINO 700 E13C HAND BRAKE VALVE (RHD) – 47930-1870 / S44Y0-E004
Critical: This is for RHD (Right-Hand Drive) vehicles only.
- Compatible with Hino 700 series (GH, SH, FY, etc.) – RHD cab.
- OEM numbers: 47930-1870 / S44Y0-E004.
- NOT interchangeable with LHD version (47930-1890 / E0060).
- Check lever orientation and port positions before installation.
- Depressurize air tank before removing old valve.
Product Description:
This E13C hand brake valve is specifically designed for Right-Hand Drive (RHD) Hino 700 series trucks. It controls the spring-type parking brake system through manual hand lever operation. OEM replacement numbers: 47930-1870 and S44Y0-E004. Constructed from high-strength aluminum with precision-machined internal spools and seals to prevent air leakage. The RHD version features mirror-positioned mounting bracket and air ports compared to LHD valve, ensuring correct cable routing and driver ergonomics. Direct fit for RHD Hino 700 models used in markets such as Japan, Australia, New Zealand, South Africa, UK, and Thailand.
| Parameter | Details |
|---|---|
| Product Name | Hand Brake Valve (Parking Brake Control Valve) |
| Valve Model | E13C |
| OEM Part Numbers | 47930-1870 / S44Y0-E004 |
| Vehicle Application | Hino 700 series – RHD (Right-Hand Drive) |
| Compatible Cab Types | RHD only (e.g., Australian, Japanese, UK specs) |
| Operation Type | Manual hand lever (spring return) |
| Body Material | Die-cast aluminum |
| Port Thread Type | Typically 1/4" or 3/8" NPT / metric – verify with old valve |
| Max Operating Pressure | 10 bar (145 psi) |
| Temperature Range | -40°C to +85°C |
| Mounting Orientation | Asymmetrical bracket for RHD cab |
| Function | Apply / release spring brakes (parking) |
*Note: Port layout is mirrored compared to LHD valve (47930-1890).*
Before ordering, compare these RHD features with your old valve:
- Hand lever pivots to the left side of the valve body (when viewed from driver seat facing forward).
- Air inlet/outlet ports are positioned for RHD chassis air line routing.
- Mounting bracket holes are offset for RHD dashboard/firewall area.
Custom Content – Installation Reminder:
- Use new copper washers or O-rings if supplied.
- Do not overtighten port fittings (max 20–25 N·m for aluminum body).
- After installation, test parking brake hold on a 15% slope with vehicle loaded.
- If air leaks from exhaust port when released, internal seal may be damaged – replace valve.
Custom Content – Packing:
Each valve packed in foam-protected box. Includes 2x mounting bolts (M8). No airline fittings included.
Q1: Is this hand brake valve compatible with Left-Hand Drive Hino 700?
A: No. This is RHD only. For LHD, use 47930-1890 (S44Y0-E0060). The port and lever positions are mirrored.
Q2: What is the difference between 47930-1870 and 47930-1890?
A: 47930-1870 = RHD version (right-hand drive cab).
47930-1890 = LHD / universal version. They are not interchangeable.
Q3: How can I confirm my Hino 700 is RHD?
A: If the driver seat is on the right side of the cab, it is RHD. Common RHD markets: Japan, Australia, New Zealand, South Africa, India, Thailand, UK.
Q4: My truck has S44Y0-E004 printed on the old valve. Does this replace it exactly?
A: Yes, S44Y0-E004 is the Hino system number equivalent to 47930-1870.
Q5: The hand lever feels loose after installation. What’s wrong?
A: Check the internal return spring and lever pivot bolt. Some RHD valves have adjustable tension – tighten the center bolt slightly (max 1/4 turn).
Q6: Can this valve be repaired with a seal kit?
A: Not recommended. Internal bore wear is common. Replacement is safer for parking brake function.
Q7: Will this fit Hino 700 with automated manual transmission (AMT)?
A: Yes, parking brake control is independent of transmission type. However, AMT trucks may have an additional electronic parking brake switch – this valve still works for the pneumatic part.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.