316SS Carbon John Crane Dry Gas Seal Aes Cartridge Seal For Compressor
AESSEAL CCS Dry Gas Seals Cartridge Mechanical Seal for Compressor
Gas Seals
Compressor Seals
CCS
Conventional Compressor Seal
The CCS™ is a tandem cartridge seal where the inboard seal is designed to seal up to 82 bar (1200 psi) and an outboard seal that acts as a low pressure tandem seal.
The outboard seal is capable of full pressure containment in the event of full seal failure.
Features
- Ideally suited for retrofitting wet compressor seals and bushings or as a replacement for existing Dry Gas seals
- Supplied in 410 stainless steel as standard with exotic alloy options on request
- Available with Silicon Carbide seats as standard. Tungsten Carbide and Silicon Nitride seats available on request. Mating faces available in Carbon and synthetic diamond coated Silicon Carbide
- ‘O’ ring and spring energized polymer versions available
- Designs available in single double tandem or tandem with intermediate labyrinth for increased integrity
- Fully shrouded seats adopted as standard
- Bi-directional seal designs available
Separation Seals
AESSEAL® offers both labyrinth and dual bush non-contacting separation seals supplied individually or as an integral part of the gas seal cartridge. This device provides a positively pressurised chamber protecting the dry gas seal from potential bearing oil migration and preventing gas ingress to the bearing chamber.
Performance Capabilities
| Temperature | -20℃ to 200℃, dependent on the elastomer |
|---|---|
| Pressure | Up to 2.5MPA |
| Speed | Up to 15 m/s |
| End play/axial float allowance | ±0.1mm |
| Brand | BESTSEAL |
| Face | Carbon, SiC, TC |
| Seat | Ceramic, SiC, TC |
| Elastomer | NBR, EPDM, FKM etc. |
| Spring | SS304, SS316 |
| Metal parts | SS304, SS316 |
| Packing | Individual packing ,1 pc in 1 small box is available as well |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.