ANSI Stationary DEPAC Mechanical Seal Cartridge Mechanical Single Acting For Pumps
Mechanical seals
cartridges
ANSI mechanical seals
The type 301 ANSI is a stationary single-cartridge seal.
Specially developed for the large "big bore" seal chambers of the ANSI, the gland of the type 301 ANSI is equipped with ¼" NPT flush and quench connections.
- ¼" NPT flush and quench connections
- Independent of the direction of rotation
- Shock and vibration-dampend faces
- Springs outside the medium
| Range of application* | |
| Pressure | 700 mm Hg - 28 bar |
| Temp. | Elastomer dependent |
| Sliding velocity | up to 35 m/s |
| Shaft movements | axial ≤ Ø 22 +/- 0,5 mm | ≥ Ø 24 +/- 1,0 mm |
| radial ≤ Ø 22 +/- 0,4 mm | ≥ Ø 24 +/- 0,5 mm | |
| Sizes | |
| Dshaft | 24 - 100 mm |
| 1“ - 4“ | |
| Special sizes available on request | |
| Materials | |
| Metals | DIN 1.4571/Hast. C |
| Springs | Hast. C |
| Faces | CA, SC, SSIC, TC |
| O-Rings | FKM, EPDM, PTFE, FEP Umm., Chemraz, Kalrez, Aflas, etc. |
Other sizes, materials or design variations upon request.
* Maximum temperature / pressure / speed indicates operating extremes independently and does not imply the seal will function at these extremes at the same time. Contact BESTSEAL if in doubt.
BESTSEAL — Your Reliable Partner for Mechanical Seals
| BESTSEAL Advantage: | |
|---|---|
| 15 years | Focused in mechanical seal manufacturing |
| 3 hours | Quotation response only takes 3 hours |
| 1 day | Provide production assembly drawings |
| 1 piece | MOQ, One piece can also be produced |
| 15-20 working days | The production cycle only takes 15-20 working days |
| real-time | Real time synchronization of production progress |
BESTSEAL ANSI mechanical seals
Your Fast-Track Alternative to DEPAC Type 301 ANSI
Custom ANSI mechanical seals — From Drawing to Delivery in 15–20 Working Days
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.