T-150H Polyisobutylene Monosuccinimide | PIBSI | Lubricant Dispersant Additive |
T-150H POLYISOBUTYLENE MONOSUCCINIMIDE
DESCRIPTION:
This product is made of highly active polyisobutylene as raw material, produced by pure heat adduction process, and does not contain chlorine.It has excellent low-temperature sludge dispersion and good purity, which can inhibit the formation of carbon deposits and paint film in engine pistons.
PRODUCT FEATURES:
■Excellent low-temperature dispersion ■Good purity ■The product does not contain chlorine
APPLICATION AND DOSAGE:
It is used to modulate engine oil, especially suitable for modulating two-stroke engine oil, and is also suitable for the production of chemical additives, and is also one of the main raw materials for fuel oil additives
Reference dose:0.5%-4.0%.
SPECIFICATION
|
ITEM |
Typical data |
TEST METHOD |
|
Color, (Diluted) |
≤3.0 |
GB/T 6540 |
|
Density(20°C), kg/m3 |
890~930 |
GB/T1884 |
|
Flash point(COC), °C |
≥180 |
GB/T3536 |
|
Nitrogen (mass fraction)/% |
3.0-3.4 |
SH/T 0224 |
|
TBN (KOH)/(mg/g) |
≥90 |
SH/T0251 |
|
Kinematic viscosity (100°C)/(mm2/s) |
200-300 |
GB/T265 |
|
Moisture (mass fraction)/% |
≤0.08 |
GB/T260 |
|
Mechanical impurities (mass fraction)/% |
≤0.08 |
GB/T511 |
STORAGE
This product shall be stored, loaded & unloaded and blended according to SH/T0164. The high temperature shall not exceed 80°C, and not exceed 60°C for long term storage. It is nonflammable, non-explosive and in-corrosive, and it is same as the common petroleum products in the aspects of security, environmental protection and use etc. Special protection is not needed.
PACKAGE
170kg per drum; 900MT per IBC drum.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.