Automatic Robotic Deburring And Polishing Machine for Three Way Pipe Connector
Price:
68000-102000 USD
MOQ:
1
Delivery Time:
90 working days
Brand:
kingstone
Product Description
High-Precision Robotic Deburring And Polishing Machine for Three Way Pipe Connector
Product Overview
The two parts in the photograph tell the complete story. On the left: a tri-arm aluminium die cast pipe connector fresh from the casting die with parting-line flash, rough casting skin, and oxidised tube bore. On the right: the same casting after processing with the LR-DP-HP-PC machine - clean parting lines, flat arm faces, mirror-finished flanges, and smooth tube bore. This represents true high-precision deburring and polishing that prepares parts for chrome or PVD finishing.
Three-Way Aluminium Pipe Connector Applications
This structural and aesthetic fitting is used in premium furniture, retail and exhibition displays, architectural hardware, and industrial equipment. The connector must meet both dimensional precision and mirror-finish aesthetic requirements simultaneously.
- Premium furniture: Central column-base on dining tables, office desks and display pedestals
- Retail and exhibition display: Structural node of display systems and shop fittings
- Architectural hardware: Stair baluster bases, balcony handrail supports, shower enclosure fittings
- Industrial equipment: Pipe-support structures, modular machine frames, conveyor-rail intersections
Key Technical Features
Compound-Curve Parting-Line Flash Removal
Phase D1 uses a curve-following edge tool programmed from the connector's CAD profile that traces exact parting-line geometry while maintaining consistent contact force through all geometry changes. The surrounding arm face and boss material are never contacted by the flash-removal tool.
Boss-Face Protection
Phase D3 and Phase P2 include boss-face flatness protection protocols that ensure flat faces for clamping or sealing applications. Tools stop at precise distances from the face plane, preserving flatness while achieving required surface refinement.
Frequently Asked Questions
1. Can the machine reach parting-line geometry through fillet transitions?
Yes - Phase D1 specifically addresses this challenge. The tool path follows the parting line through straight arm sections, curved fillet transitions, and boss circumference with continuous approach angle changes. The fillet material and boss surface are protected by a path clearance zone.
2. How does the machine ensure consistent sheen levels across all three arms?
The LR-DP-HP-PC uses C-axis arm indexing where the same programme runs on each arm in sequence with identical contact force, dwell time, and tool state. After Phase P3, the GU sensor measures each arm separately and correction passes are applied as needed to maintain arm-to-arm GU deviation within specified tolerances.
3. Will the deburring tool contact the centre bore wall?
No. The bore ID is hard path-excluded with specified clearance. The part is registered on the bore OD shoulder, and all paths reference the bore axis without entering the bore. The bore-entry edge is conditioned by an axial-approach tool that works from outside the bore without contacting the bore wall.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Zhejiang Kingstone Robot & Technology Co., Ltd.
Location
NO 275 KAIFAQU RD, ECONOMICDEVELOPMENT ZONE,RUIAN ,WENZHOU CITY,ZHEJIANG PROVINCE,CHINA
Contact Person
Bill Ni