Tiantuo Drive Board SZKB-F8/5 Traction Control Module for CTL12/6 and CTL12/9P Locomotives
Tiantuo Drive Board is a high-reliability traction control module engineered for the CTL12/6 and CTL12/9P(A) series mining electric locomotives manufactured by Qinhuangdao Tiantuo. Serving as the critical interface between the locomotive's main control board and the power stage, this board processes low-voltage logic commands and generates precise gate drive signals for the IGBT inverter modules that regulate traction motor speed, direction, and braking. Its densely populated green PCB integrates a large-scale main control processor, three independent power drive channels with boost-inductor-based gate drive circuits, and comprehensive fault feedback logic. Manufactured with industrial-grade components and a conformal-coated surface, the board ensures reliable commutation, smooth speed regulation, and effective protection in the demanding conditions of underground rail haulage.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | SZKB-F8/5 |
| Compatible Locomotive Models | CTL12/6, CTL12/9P(A) |
| Product Type | Traction Drive Control Board / Gate Drive Signal Module |
| Application | Underground Mining Electric Locomotive |
| Main Control Processor | Large-scale BGA package controller |
| Drive Channels | 3 independent channels (compatible with 3-phase full-bridge topology) |
| Gate Drive Topology | Boost-inductor-based isolated gate drive |
| Input Control Voltage | DC 24V (logic level) |
| Output Gate Drive Voltage | +15V / -8V (typical IGBT drive levels) |
| Isolation Voltage | ≥2500V AC (Optical Isolation) |
| Protection Functions | Over-current, Under-voltage Lockout, Fault Feedback |
| Operating Temperature | -20°C to +70°C |
| PCB Finish | Green Solder Mask with Conformal Coating |
| Connector Type | Pluggable Terminal Blocks and IDC Connectors |
| Mounting Type | Panel Mount / Chassis Mount |
Applications & Key Advantages by Category
CTL12/6 and CTL12/9P Locomotive Traction Control – The SZKB-F8/5 serves as the primary interface between the locomotive's main control board and the high-power IGBT inverter. It converts low-voltage PWM signals from the controller into the high-current gate pulses required to switch the traction motor's power stage, enabling smooth acceleration, regenerative braking, and precise speed regulation in underground haulage operations.
IGBT Gate Drive and Protection – Each of the three drive channels delivers isolated gate pulses with fast rise times to ensure rapid IGBT switching with minimal switching losses. Integrated over-current protection and under-voltage lockout functions continuously monitor the power stage, feeding fault signals back to the main controller to prevent catastrophic failure of the inverter bridge.
Optical Isolation for Signal Integrity – High-speed optocouplers provide galvanic isolation between the low-voltage control logic and the high-voltage power stage. This isolation prevents dangerous voltage transients from damaging the sensitive control electronics and ensures reliable signal transmission even in the presence of severe electromagnetic interference generated by the traction motor and power conversion equipment.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.