Water Solenoid Valves

series US-25 steam solenoid valve brass water valve UNID Series High temperature US-25 USD-40 1. US series is multiplex-drive,piston guide,conductive normal close. 2.valve body made of cast bronze. 3.standard voltage :110VAC/220VAC/24VDC 4. Other special AC/DC can be made to cilent order. 5.Screwed end : BSPT,NPT.BSP. 6.The standard product fluid temperature is 180° (PTFE) 7.In special case ,US can made 20kgf/cm²,30kgf/cm²,40kgf/cm².Please state the type of fluid with your

PU220 series Water Brass valve Direct Acting Solenoid Valve PU220-04 PU225-08 Normally Closed Brass Zinc 2 way Water Solenoid Valve PU220-04, PU220-06, PU220-08 PU220 Series PU220-01 PU220-02 PU220-03 PU220-03 PU220-04 PU220-06 PU220-08 Orifice Size 1.5mm 2.3mm 8.0mm 13.0mm 13.0mm 20.0mm 25.0mm Port Size 1/8' 1/4' 3/8' 3/8' 1/2' 3/4' 1' Medium Water, Oil, Compressed Air Action Direct Lifting Diaphragm NC/NO 2 Way, Normally Closed / Normally Open Body Material Brass Seal

0927Series 2/2 Way 16Bar High Pressure Brass Normally Closed Air Solenoid Valve 0927100 0927200 0927400 Water valve Model 927000 927200 927300 927400 927500 927600 927700 Port Size G1/4' G1/2' G3/4' G1' G 1 1/4' G1 1/2' G2' Bore (mm) 8 12 20 25 32 40 50 KV Value 1.15 1.7 5.1 5.35 20 25 43 Weight (kg) 0.7 0.7 1.2 1.3 2.7 2.7 3.5 Pressure 0.07~1.6MPa 0.1~1.6MPa Medium Air,wate,oil,steam Type Normal closed Body Material Brass Seal Material NBR/fluororubber(SILICAL) Temperature NBR:-5

2S Series Stainless steel water valve solenoid valve electromagnetic valve 2S-025-08 2S-040-10 2W Series 2W025-08 2W040-10 2W160-15 2W200-20 2W250-25 2W350-35 2W400-40 2W500-50 2S Series 2S025-08 2S040-10 2S160-15 2S200-20 2S250-25 2S350-35 2S400-40 2S500-50 Orifice Size 2.5 4 15 20 25 35 40 50 Port Size 1/4' 3/8' 1/2' 3/4' 1' 1-1/4' 1-1/2' 2' Medium Water, Air, Oil, Gas Action Direct Acting Semi-Direct Diaphragm Operated Function 2 Way, Normally Closed Fluid Viscosity 20 CST

2W Series 2/2 way Solenoid valve Normal Close Brass Water valve 2W025-06 2W040-10 2W Series 2/2 way Direct Acting Solenoid Valve Model 2W025-06 2W025-08 2W040-10 2WH012-06 2WH012-08 2WH020-10 Medium Air,Water,Oil,Gas Operation Direct Acting Type Normal Close Orifice Size(mm) 2.5 4 1.2 2 CV Value 0.23 0.6 0.05 0.15 Port Size G1/8" G1/4" G3/8" G1/8" G1/4" G3/8" Operation Fluid Viscosity Below 23 CST Operating Pressure Air,Water,Oil,Gas:0~0.7Mpa Air,Water,Oil,Gas:0~0.2

5404 Series 5.0MPA High pressure High Temperature Solenoid valve 5404-04 06 08 Model 5404-04 Orifice 7/16" – 1" (DN 12 – 25 mm) Body material Brass Valve internals Stainless steel, brass Seal material NBR, PTFE seat seal Media Neutral media, compressed air, water, hydraulic oil Media temperature 14°F to 194°F (-10°C to +90°C) Ambient temperature Max. 131°F (+55°C) Voltage tolerance ±10% Duty cycle 100% continuous rating Electrical connection Tag connector according to DIN EN

CEME9934 High temperature solenoid valve 2/2way steam application valve 1/4inch Techical data Body material Brass Seal material EPDM-FPM-PEFE-RULON Tube material Stainless steel Working fluids Steam Electrial connection 6.3 *0.8 fast - on terminal Insulation class H CARATTERISTICHE GENERALI PRESSIONE MINIMA DI FUNZIONAMENTO 0 bar PARTI A CONTATTO CON IL FLUIDO TENUTA EPDM - PTFE - RULON® - FPM CORPO OTTONE CON SEDE DI TENUTA INOX (9912, 9913, 9914) TUBO GUIDA INOX - Tenuta

2 Way High Pressure Timer Auto Water Solenoid Stainless Steel Drain Valve Specifications With timer,automatically drain at settled time. Widely used in filter mahine,separator,air tank,dripping feet and other air compressor system parts.Drain lasting time and separation time is adjustable. ◈ Voltage: 24VDC/110VAC/220VAC ◈ Port size: 1/2" ◈ Power: 20 Watt ◈ Water proof grade: IP65 Item Material Body Stainless Steel Seal NBR,EODM,FKM Amature tube stainless steel 304 Plunger

Taiwan UNI-D type Water solenoid valve 1" 1 1/2" 2" Brass valve US-25 US-40 US-50 Feature 1. UD series is multiplex-drive, piston guide, conductive normal close. 2. Valve body made of cast bronze. 3. Standard voltage: 110VAC/220VAC/24VDC 4. Other special AC/DC can be made to client's order. 5. Screwed end : BSPT, NPT, BSP. 6. The standard product fluid temperature is 185℃(PTFE). 7. In special case, US can made 20 kgf/cm2, 30kgf/cm2, 40kgf/cm2. Please state the type of fluid

Original UniD UD series Normal close Brass 1/4" 1/2" Water solenoid valve UD-8 UD-15 Feature 1. UD series is direst-acting, conductive, normal close. 2. Valve body made of forged brass. 3. UD can be operated directly without pressure. 4. Small size and easy assembly. 5. Standard voltage: 110VAC/220VAC/24VDC 6. Other special AC/DC can be made to client's order. 7. Screwed end : BSPT, NPT, BSP. 8. The standard product fluid temperature is 80℃(NBR). 9. fluororubber(130℃), Silicon(130℃)

Original Uni-D UD series Normal open Brass 1/8" 3/8"Water solenoid valve UD-6 UD-10 Feature 1. UD series is direst-acting, conductive, normal close. 2. Valve body made of forged brass. 3. UD can be operated directly without pressure. 4. Small size and easy assembly. 5. Standard voltage: 110VAC/220VAC/24VDC 6. Other special AC/DC can be made to client's order. 7. Screwed end : BSPT, NPT, BSP. 8. The standard product fluid temperature is 80℃(NBR). 9. fluororubber(130℃), Silicon(130℃),

Normal open brass 2/2 way solenoid valve DN20 DN25 5404 AC220V DC24V Product Description: • UD series is direct-acting, conductive, and normally closed (NC) 2/2 way solenoid valve. • Able to operate under no differential pressure • Applied fluid type : water, air, light oil, gas, vacuum • Acceptable for customization: fluororubber (130 C) Silicone (130 C) and EPDM (130 C) for seal plug Requirement: 1.Before pipelining, the pipe line must be very clean without any contaminants or

Normal open brass 2/2 way solenoid valve DN20 DN25 5404 AC220V DC24V This Normal open pilot-controlled solenoid valve with servo-piston is closed without power and is suitable for the control of liquid and gaseous media at high pressure. A minimum differential pressure of 14.5 PSI (1 bar) is required to fully open the valve. The closing time for DN 20 and 25 can be continuously adjusted. Specifications: Product NO. 5404NO Product type 2/2 way Normal Voltage AC220V DC24V

5404 brass 2/2 way solenoid valve with piston high pressure DN20 DN25 This pilot-controlled solenoid valve with servo-piston is closed without power and is suitable for the control of liquid and gaseous media at high pressure. A minimum differential pressure of 14.5 PSI (1 bar) is required to fully open the valve. The closing time for DN 20 and 25 can be continuously adjusted. Specifications: Product NO. 5404 Product type 2/2 way Normal Voltage AC220V DC24V Orifice 7/16"-1"

DN50 BV2011S Electric Water Solenoid Valves G2" Three wire two control Specifications: Motor type Synchronous motor Length of power wire 300 mm Action time 15 s Connect type G thread Shut-off diff. press. ≤0.6 Mpa Nominal pressure PN16~PN20 Medium temperature 2~95 ℃ Power 6W (Only when open the valve) Suitable medium Cold, hot water or 50% Ethanol solution) Vpltage (50/60 Hz) 24VAC/110VAC/220VAC Product type: Product type Control mode Operation principle BV2011S-31 Three-wire

DN40 Synchronous generator Water Solenoid Valves BV2011S water pressure valves Specifications: Motor type Synchronous motor Length of power wire 300 mm Action time 15 s Connect type G thread Shut-off diff. press. ≤0.6 Mpa Nominal pressure PN16~PN20 Medium temperature 2~95 ℃ Power 6W (Only when open the valve) Suitable medium Cold, hot water or 50% Ethanol solution) Vpltage (50/60 Hz) 24VAC/110VAC/220VAC Product type: Product type Control mode Operation principle BV2011S-31

BV2011S two position solenoid ball valve DN25 G1" Synchronous electric machine drive Specifications: Motor type Synchronous motor Length of power wire 300 mm Action time 15 s Connect type G thread Shut-off diff. press. ≤0.6 Mpa Nominal pressure PN16~PN20 Medium temperature 2~95 ℃ Power 6W (Only when open the valve) Suitable medium Cold, hot water or 50% Ethanol solution) Vpltage (50/60 Hz) 24VAC/110VAC/220VAC Product type: Product type Control mode Operation principle BV2011S

Ball BV2011S DN20 3/4" Electric motor Water Solenoid Valves 2 way Brass Specifications: Motor type Synchronous motor Length of power wire 300 mm Action time 15 s Connect type G thread Shut-off diff. press. ≤0.6 Mpa Nominal pressure PN16~PN20 Medium temperature 2~95 ℃ Power 6W (Only when open the valve) Suitable medium Cold, hot water or 50% Ethanol solution) Vpltage (50/60 Hz) 24VAC/110VAC/220VAC Product type: Product type Control mode Operation principle BV2011S-31 Three

Steel 2 Way High Pressure Ball Valves DN16 KHB - G1/8 G1/4 G3/8 G1/2 G3/4 G1 Ordering Code: KHB-G1/8, KHB-G1/4, KHB-G3/8, KHB-G1/2, KHB-G3/4, KHB-G1 Order code Specifications 1. 1/4” - 2” Full Port Design 2. Polyacetal Ball Seals (standard) 3. NPT or SAE O-Ring connections 4. Forged Housing - Sizes 32 - 50 5. Carbon Steel Housing 6. Block Housing - Sizes 06 - 25 7. FPM (Fluoroelastomer) O-Rings (standard) 8. Operating Pressure to 7250 psi Depending on Valve Size and Seal

KHB - G1/4 G3/8 Floating Ball Valve High Pressure With 500 Bar Ordering Code: KHB-G1/8, KHB-G1/4, KHB-G3/8 Order code Description The HYDAC family of dependable high pressure ball valves provides full, unrestricted flow and positive shut-off of fluids and gases under extreme service conditions. Models are available to accommodate system pressures up to 7,250 PSI. Since a variety of materials are available, HYDAC valves can be used with various fluids and gases including