Heat Exchanger Tube

ASTM A213 / ASME SA213 T9 Alloy Steel Seamless U Bend Tube​ Heat Exchanger Tube ASTM A213/ASME SA213 outlines stringent requirements for seamless ferritic and austenitic steel tubes intended for service in elevated temperature environments, ensuring material integrity, mechanical performance, and dimensional consistency. According to ASTM A213 T9 material undergoes normalizing (heated to 925–980°C) followed by tempering (675–760°C) to refine its microstructure, balancing

ASTM B395/ ASME SB395 C68700 U Bend Copper & Copper Alloy Tube For Heat Exchanger Copper and copper alloy U-bends are widely used in heat exchangers, condensers and cooling systems Pure copper (UNS C12200/C10200)Excellent thermal/electrical conductivity (thermal conductivity ~400 W/m·K).Resistant to oxidizing acids (such as dilute sulfuric acid) and non-oxidizing environments. Aluminum brass (UNS C68700)Composition: Cu-Zn-Al (aluminum 1.5-2.5%).Excellent resistance to

ASTM A179 Carbon Steel Seamless Heat Exchanger Tube ASTM A179 is a standard developed by the American Society for Testing and Materials (ASTM), which is a specific purpose seamless steel tube suitable for the thinnest seamless steel tube used in tubular heat exchangers, condensers, and similar heat conduction devices. The outer diameter specification of steel tubes specified in ASTM A179/ASME SA179 standard is between 1/8 inch and 3 inches (i.e. 3.2 to 76.2 millimeters),

ASME SB111 C68700 U Bend Boiler Tube Application 1. Marine & Offshore Systems Seawater Cooled Condensers & Heat Exchangers: Shipboard condensers (main engine cooling), Offshore oil rig heat exchangers (cooling hydraulic systems, lube oil), Desalination plants (multi-stage flash evaporators). 2. Power Generation (Fossil & Nuclear) Steam Surface Condensers: Coastal/nuclear power plants (seawater-cooled condensers), Waste heat recovery units (exhaust gas boilers). 3. Chemical &

TP304 U-Bend Pipes with 515MPa Tensile Strength | Hydraulic Tested & Eddy Current Inspected 1. Introduction ASTM A213 TP304 U-tube is an austenitic stainless steel seamless tube designed for high-temperature and high-pressure equipment. It is widely used in key components such as boilers, heat exchangers, and condensers. TP304 stainless steel has excellent corrosion resistance and high-temperature strength. Its U-shaped bending structure can effectively absorb thermal

ASME SA249 TP304 Stainless Steel Welded Heat Exchanger Tube Bright Annealed ASTM A249 is a standard developed by the American Society for Testing and Materials (ASTM) specifically to specify technical requirements for welding austenitic stainless steel tubes and ferritic alloy steel tubes for boilers, superheaters, and heat exchangers. TP304 , as a key material grade under this standard, has unique chemical composition and performance. The main chemical components of ASME

ASTM A213 TP316L Seamless Stainless Steel U Bend Tube , 100% Hydraulic Test / Eddy Current Test ASTM A213 TP316L stainless steel U bend tubes are typically subjected to various tests including hydrostatic tests, eddy current tests, and visual inspections to ensure they meet the required specifications. ASTM A213 mandates heat treatment to meet mechanical and corrosion resistance standards but does not specify the annealing method. The choice between bright and pickling

EN10216-2 P265GH U-Bend Tubes EN10216-2 P264GH U-Bend Tubes are seamless, cold-formed tubes designed for demanding industrial environments. Manufactured to comply with the European standard EN10216-2, these tubes combine superior heat resistance, mechanical strength, and corrosion durability, making them ideal for heat exchangers, boilers, and pressure vessels. 1. Mechanical Properties Property Value Tensile Strength 460–640 MPa Yield Strength ≥265 MPa Elongation (A₅) ≥20%

1. Product Overview ASTM A213 TP316L U-tube is an austenitic stainless steel seamless tube designed for high temperature and high pressure environments, and complies with the requirements of the ASME boiler and pressure vessel specifications. The cold-bent U-shaped structure significantly improves the heat exchange efficiency and is widely used in the core heat transfer system of power station boilers, petrochemical refining, and nuclear power equipment. 2. Core Material

ASTM A312 TP304 / 304L Stainless Steel Corrugated Tube U Bend Spiral Tube for Heat Transfer Stainless steel U-bend corrugated tubes play a crucial role in modern engineering solutions, combining flexibility, durability, and efficiency. They are integral to various applications across multiple industries, from automotive and HVAC to pharmaceuticals and food processing.The corrugated structure can enhance the heat transfer surface area, improving thermal performance in

ASTM A209 / ASME SA209 T1A Low Alloy Steel Seamless U Bend Heat Exchanger Tube ASME SA209 T1A is a material specification for seamless carbon steel tubes primarily used in boiler and superheater applications. This alloy provides good strength at elevated temperatures and moderate resistance to oxidation and creep, making it suitable for high-temperature and high-pressure environments. However, for more aggressive corrosion and higher temperature, other alloys like T22, T91 or

ASTM A179 A210 Gr. A Seamless Carbon Steel Heat Exchanger and Condenser Tube ASTM A179 Heat Exchanger Tubes are seamless cold-drawn low-carbon steel tubes specifically designed for applications requiring heat transfer, such as heat exchangers, condensers, and similar equipment. These tubes are known for their high thermal conductivity, precise dimensional tolerances, and excellent mechanical properties, making them suitable for heat transfer applications. Manufacturing

SA179 Carbon Steel Tube O.D. 19.05MM 7000MM Length for Stabilizer Trim Cooler Yuhong Holding Group Co., Ltd. is a leading manufacturer and exporter of high-quality heat exchanger tubes. With over 20 years of export experience, we proudly serve clients in more than 80 countries and rank among China’s top five exporters of finned and seamless tubes. Our factory spans 20,000 m², equipped with 55 production lines and supported by over 110 skilled employees. We are committed to

ASTM A179 Seamless Carbon Steel Tube For Heat Exchanger and Condenser ASTM A179 is a standard specification for seamless cold-drawn low-carbon steel tubes primarily intended for use in heat exchangers, condensers, and similar heat transfer equipment. These tubes are commonly used in industries such as chemical processing, power generation, oil and gas, and more due to their excellent thermal conductivity and durability. Key Features: Material: Low-carbon steel. Seamless

ASTM B163 / ASME SB163 Monel 400 / UNS N04400 Nickel-Copper Alloy Seamless U Bend Tube ASTM B163/ ASME SB163 specification relates to tubes defined by their outside diameter along with either average wall thickness or minimum wall thickness. It applies to sizes of 3 inches (76.2 mm) in outside diameter or less, with minimum wall thicknesses not exceeding 0.148 inches (3.76 mm) and average wall thicknesses not exceeding 0.165 inches (4.19 mm). Monel 400 is mainly consist of

ASTM A179 / ASME SA179 Carbon Steel Seamless Tube Cold-drawn Heat Exchanger Tube ASTM A179/ ASME SA179 is a low-carbon steel grade, typically with a maximum carbon content of 0.18%. Tubes are manufactured by cold drawn process, which results in improved strength and hardness due to work hardening. The surface finish is smoother compared to hot-rolled products, reducing the need for further processing or coating. The tight tolerances and smooth finish contribute to better

U-bend fin tubes are widely used in thermal systems that require efficient heat transfer, especially in compact or high-performance setups. The addition of fins enhances the surface area for heat exchange, while the U-bend shape allows for flexible designs. Applications 1.Heat Exchangers Used in shell-and-tube heat exchangers in industries like power generation, petrochemicals, and refineries. Ideal for transferring heat between fluids with significant temperature differences

ASTM A178 / ASME SA178 Gr.A Carbon Steel ERW Tube Boiler Tube ASTM A178/ASME SA178 is a standard specification for electric-resistance-welded (ERW) carbon steel tubes used primarily in boiler superheaters, heat exchangers, and condensers. These tubes are designed for moderate temperature and pressure service. The key characteristic of SA178 tubes is their welded construction, making them a cost-effective alternative to seamless tubes for many applications where the highest

Stainless Steel Seamless Tubes ASME SA213 TP316L for Power Plant Applications At Yuhong, we take pride in being one of China's top five exporters of boiler heat exchange tubes, with 20 years of export experience and a presence in over 80 countries. Today, we are excited to introduce our Stainless Steel Seamless Tubes ASME SA213 TP316L, specifically designed for power plant watertube boilers. Advantages of TP316L Seamless Tubing TP316L stainless steel is known for its

ASME SA179 Carbon Steel Seamless Tubes for Heat Exchangers HIC & SSC Tested Our ASME SA179 Carbon Steel Seamless Tubes are specifically designed for heat exchangers, providing excellent performance and reliability. These tubes are manufactured to meet the stringent standards of ASME SA179, which outlines specific requirements for seamless carbon steel tubes. Carbon steel is a crucial material in various industrial applications due to its strength, durability, and resistance