H Beam Production Line

1. Technical parameter ● The maximum thickness of the work-piece: 80mm ● The maximum extension of the work-piece: one basic point: 1000*1600mm (two basic points: 500*1600mm, four basic points: 500*800mm ● The maximum diameter: 50mm ● Main drive rotating speed: 130-400r/min, step-less speed ● The maximum stoke of the main drive: 180mm (oil-cylinder feed) ● Oil-cylinder used for clamping working table: 12

1. Applicable industry The machine is the special equipment used for angle steel punching, marking & shearing in the field of angle steel tower industry. 2. Specifications of TAPM1516 Model TAPM1516 Angle size (Q235) L40*40*3mm to L150*150*16mm Maximum punching diameter * thickness Φ26*16 Punching force 1000KN Marking force 800KN Cutting force 1800KN Maximum length of blank 12 or 14m Maximum length of finished 10m Punches per side 3 Group of marking letters 4 Stadia servo

1. Application - The whole machine can mainly be used for the metal cutting machine - Maximum cutting thickness can up to 50mm. 2. Specification Model BCP1325 Power source Huayuan 100A Control system Beijing START plasma control system, standard high sensitivity arc voltage device Cutting speed 0-15m/min(depending on material and thickness) Transmission system X, Y Taiwan Hiwin high-precision, zero clearance increased linear guide+rack, Z the arc voltage control Positioning

1. Introduction - The design of wide beam guarantees the rigidity and stability of the quipment - Whole furnace annealing is adopted for treatment of non-ignorable structural parts after being welded,which guarantees the accuracy stability of equipment operation for a long time - The surface sandblasting of non-ignorable structural parts after annealing improves the aesthetics of surface paint and the surface coating adhesion and long-term corrosion resistance - Machined

1. Main Features - Maximum length of work piece: 500mm to 2500mm - TIG, MIG/MAG, PAW, SAW methods can be equipped - PLC control - Pneumatic torch lifting structure - Driven by DC servo motor - Pneumatic piano type clamping device and red copper gasket can balance the pressure 2. Specification Model Unit LH-500 LH-1000 LH-1500 LH-2000 LH-2500 Max. Length of Work Piece mm 500 1000 1500 2000 2500 Diameter of Work Piece mm 80-800 115-700 115-700 185-700 205-700 Thickness of Work

● Web height: 200-1500mm ● Web thickness: 6-32mm ● Flange width: 150-800mm ● Flange thickness: 6-40mm ● H beam length: 4000-15000mm ● Welder: MIG (Panasonice 600A) or SAW (Chengdu Huayuan 1000A) ● Welding speed: 300-1500mm/min ● Assembly precision: ±1.5mm ● Positioned style: one side electric, another side hydraulic clamping ● Control: AC frequency control, attach PLC control ● Machinery power: 4.5KW ● Welder

1. Simple introduction T beam hydraulic straightening machine is used to calibration the thick T beam (upwrap & side bend) and hydraulic float conveyor in the front/ back of main machine, it is widely used in the heavy steel construction industries. After the welded the web and flange the web and flange will be deformation because of the heat up, so it must straightening the web and flange. The main

● Forming material: 2.0-8.0mm ● Yield strength: ≤G250MPa ● Forming speed: 0-10m/min ● Maximum feeding width (effective width): 1500mm ● Motor: 30KW ● Main roller diameter: 320mm ● Main roller material: 45# high quality steel thermal refining ● Forming method: Up and down roller on the pressure ● Transmission method: universal joint and drive shaft ● Pressure adjustment: reducer ● Frequency speed adjustment: 0

1. Brief introduction The whole machine adopts the structure of cantilever trolley driving way, the main machine combined with traveling structure, cantilever frame body, electric-motion pole lifting structure and level moving structure, arc guiding structure, flux auto recycling system, auto submerged arc welding system, electric control system and so on. This machine is driven by frequency conversion motor

1. Technical parameters ● Width of the flange: 150-800mm ● Thickness of the flange: 6-40mm ● Height of the web: 200-2500mm ● Thickness of the web: 5-32mm ● Length of the usable h beam: 4000-16000mm ● Welding speed: 240-2400mm/min ● Welding position: fillet welding in the flat position ● Size of the usable welding wire: 3.2-5mm 2. Performance MZT-1250*2 T type submerged arc welding machine is specially designed for

1. Machine introduction PHJ series H beam fabrication machine is a highly efficient equipment for manufacturing welding structure H beam, which can finish the job of accurate “I” shape assembly, SAW, flange straightening of light duty H beam with the weld toe below 8mm.This equipment has the merit of compact appearance while integrating the function of assembly, welding and straightening, so as to leaving

Automatic H Beam Production Line H Beam Assembling Welding Straightening Machine H beam 3 in 1 machine H beam combination machine Double H-beam assembling, welding and straightening machine production line is composed by 2 sets of H-beam assembling, welding and straightening machines, driving roller conveyor, idler roller conveyor, driving elevating roller conveyor, flange centering device, 90° overturning machine, overturning machine with magnetic sucker, conveying chain

1. Main introduction H Beam Milling Machine is used mainly for end face milling of huge jobs. This is essentially a portable machine. H Beam Milling Machine is a portable milling solution for huge jobs. This machine can be used to end face mill, drill and bore. ● Working: This machine can be moved within the workshop with the help of a crane with the help of a crane. The machine then can be bolted to get

1. Technical parameter: Type DX1515 Feeding speed 1500*1500 Feeding speed 50-440 Quick backward speed 660 Power of main motor 5.5 2. Design features: ● The DX series milling machine is used for welded and rolled H- beam, box beam end face milling and cutting. It can also be used for other steel structure surface and flange surface machining. The machine has simple structure and is easy and efficient to operate. ● The steel structure end face milling is becoming an increasingl

1. Key Specifications: ● Used for milling the two end face of H-beam and box-beam ● The power head angle can be adjustable by manual in a vertical plane in order to milling the groove ● Hydraulic work-piece clamping rack as option which can press the steel sheet ● And the top of the machine is opened, this design is good for work-piece lifting and transportation ● It takes the advantage of convenience,

1. Major technical parameter H beam shot blasting machine is a kind of roller conveyor type shot blasting machine. Mainly used in eliminating the stress and descaling of the large I section steel and H section steel. Suitable for the construction and bridge industries. Technology parameter of HP series CE approved h beam shot blast machine Item HP0820 HP1220 HP1520 HP2020 HP2520 Width of work-piece (mm) ≤800 ≤1200 ≤1500 ≤2000 ≤2500 Height of work-piece(mm) ≤2000 ≤2000 ≤2000

1. Main introduction Hydraulic flange straightening machine is used for the angle distortion straightening of the H-beam with large thickness. Hydraulic cylinder presses from down side to up side, which has strong force and high driving torque and with good straightening efficiency and good quality. This machine is widely used for the fire electric furnace, heavy duty steel structure construction,

1. Major technical Parameters ● Width of the flange: 200-800mm ● Thickness of the flange: 20-60mm ● Minimum height of the web: 350mm ● Drive motor: 18.5kw ● Maximum output torque: 34770N.m ● Linear velocity of the work piece: 7.496m/min ● Hydraulic pressure system: 11kw ● Output volume of the oil pump: 25m1/r ● Maximum system pressure: 25Mpa ● Normal working pressure: 20Mpa 2. Provide goods and compose parts ●

1. Major technical parameters ● Width of the wing board: 200-800 mm ● Thickness of the wing board: 6-40 mm ● Min height of the former: 200 mm ● Power rate of the major motor: 24.2kw ● Correcting speed: 13300 mm/min 2. Provide goods and compose parts ● Main frame of correcting machine: base, left-and-right frame, motor, deceleration machine, press roller, main roller, vice roller. ● Conveyor: base, input

1. Main features ● H beam gantry gate welding machine has two structures: gantry gate move type & double cantilever move type. ● Gantry gate or cantilever drive method: AC motor and R series worm reducer. ● Welding speed: 0.15-1.5m/min. ● Arc guide frame head function is to mechanically track up and down, left and right. ● Imported frequency converter is able to realize gantry gate or cantilevers stepless speed