Pipe Welding Rotator

1. Structure principle Self-aligned welding rotator including one power and one idle, after load on the work-piece, the roll will auto suit the work-piece, no need to adjust the center distance. The transmission mechanism: motor, multi step speed adjustable, roll, it can adopts frequency speed adjust. 2. Technical parameter SAR-30 Series ● Maximum load capacity: 30T ● Suitable work-piece range: 600-4200mm ● Roller linear speed: 6-60m/h ● Speed adjust mode: frequency steepless

Oil Tank Welding Rotator Automatic Welding Positioner For Tank Seam Welding Long seam welding rotator for tank 1. Description The welding rolls frame of HGZ series and HGK series designed and manufactured by the company absorbs domestics and overseas advantages of similar products. It is designed and manufactured according to using requirements for pressure vessel manufacturers. The product is applicable for manual welding and automatic welding of metal cylinder. It is

Oil Tank Welding Rotator Automatic Welding Positioner For Tank Seam Welding Long seam welding rotator for tank 1. Description The welding rolls frame of HGZ series and HGK series designed and manufactured by the company absorbs domestics and overseas advantages of similar products. It is designed and manufactured according to using requirements for pressure vessel manufacturers. The product is applicable for manual welding and automatic welding of metal cylinder. It is

1. Structure principle Self-aligned welding rotator including one power and one idle, after load on the work-piece, the roll will auto suit the work-piece, no need to adjust the center distance. The transmission mechanism: motor, multi step speed adjustable, roll, it can adopts frequency speed adjust. 2. Technical parameter SAR-30 Series ● Maximum load capacity: 30T ● Suitable work-piece range: 600-4200mm ● Roller linear speed: 6-60m/h ● Speed adjust mode: frequency steepless

1. Equipment introduction The self aligning welding rotator is used for a circular cylinder of welding, polishing pad and on-site assembly, it can tuning itself within large ranges according to the cylinder the size, using a combination of fiber reinforced rubber roller, big bearing capacity, stability and reliability, control part will use the frequency conversion to adjust speed, wide speed range, big torque, long life, equip with a remote control box is easy to operate. 2.

Automatic Pipe Welding Rotators , Vessel Welding Turning Roller 1. The swing angle of roller group can be automatically regulated according to the work piece diameter and size and manual calibration is not needed. 2. The active roller stand adopts gear joggle transmission. 3. Steel glue assembly roller, long ton adopts full steel rolling, which has big loading capacity and driven capacity. 4. Imported frequency conversion speed regulator, which features in wide regulation

Standard Automation Welding Positioner , Welding Column And Boom Rotator Roller Welding Rotator - Feature 1. Polyurethane roller, Rubber Roller or steel roller 2. Anti creep function 3. Hydraulic lifting for fit up pipes 4. Automatic traveling or Manual traveling on the rail 5. The swing angle of roller group can be automatically regulaterd according to the work piece diameter and size and manual calibration is not needed. 6. We also can design the customize various types of

1. Simple introduction Friendship Machinery self aligning rotators are robustly designed and built to withstand the harsh and rugged environments expected of such applications and permits rollers to align themselves to the work-piece without the need for manual pre-adjustment irrespective of vality or irregularity. It uses replaceable polyurethane types mounted onto a cast steel drum for

1. Technical parameter ● Model: FSM-CWR-125 ● Load capacity: 125T (1 power & 1 idler rotator) ● Rotation speed: 130-1300mm/min ● Vessel diameter: 470-7580mm ● Incoming supply: 380-415V, 3 Phase, 50-60HZ (specify input voltage when ordering) ● AC Inverter: 11KW ● Motor rating: 2 * 5.5KW AC motors ● Control voltage: DC 24V low voltage control ● Weight: 2850Kg power rotator and 1710Kg idler rotator

1. Technical parameter ● Model: FSM-CWR-40 ● Load capacity: 40T (1 power & 1 idler rotator) ● Rotation speed: 130-1300mm/min ● Vessel diameter: 470-5490mm ● Incoming supply: 380-415V, 3 Phase, 50-60HZ (specify input voltage when ordering) ● AC Inverter: 2.2KW ● Motor rating: 2 * 1.1KW AC motors ● Control voltage: DC 24V low voltage control ● Weight: 1400Kg power rotator and 850Kg idler rotator

1. Technical parameter ● Model: FSM-CWR-10 ● Load capacity: 10T (1 power & 1 idler rotator) ● Rotation speed: 102-1020mm/min ● Vessel diameter: 236-5418mm ● Incoming supply: 380/415V, 3 Phase, 50-60HZ (specify input voltage when ordering) ● AC Inverter: 1.1KW ● Motor rating: 2 * 0.55KW AC motors ● Control voltage: 24V low voltage control ● Weight: 520Kg power rotator and 240Kg idler rotator 2. Main features ●

1. Simple introduction Tank turning roll is the finest small set of tank and pipe turning rolls on the market, built with the same quality and features as our larger tank turning rolls and pipe turning rolls. ● Hand held push button pendent control with maintained forward, stop, reverse and infinitely variable speed adjustment. ● On/off electric foot control with forward and reverse switch at the control box.

1. Introduction Pipe welding rotator (lifting welding turn roller) is specially designed and manufactured for purpose of meeting the requirements of enhancing productivity, increasing the extent of automatic, reducing welder’s working intensity and adapting to piping workshop prefabrication. The welding head will be relatively fixed, while the piping spool piece revolving at a specific rate, and the

1. Technical data Model PP2 Maximum loading capacity 2000Kg Applied work-piece diameter Φ70-Φ820mm Rotation speed 100-1000mm/min Rotate torque 1000Nm Tilt torque 5000Nm Tilt degree ±45 Tilt center height 910mm Speed adjustment AC Inverter Pendant cable length 5m Power 2.4KW Weight 1600Kg Dimension (L*W*H) 2030*920*2630mm Pinch roller Diameter: 120mm Width: 200mm Cross slide Motor: 25W Stroke: 150mm Oscillator

1. Product feature ● SWR series self-aligning rotators is composed of driven frame and a driving frame. ● Automatically adjusting the center distance in order to adapt to the diameter of work-piece. ● The structure of this machine is made of section steel and steel plate by fine welding, ensuring its structural strength and stability. ● Drive Shaft and Bearing shaft have good rigidity, high strength.

Bolt Screw Adjustable Conventional Welding Rotator , AC Frequency Converter 1. Machine introduction The CWR type conventional welding rotators have advantages of the same kinds of products in domestic and international. We design and make them according to the requirments of the pressure vessel factory. These products are applied in the handling and automatic welding of the metal circle containers, they have many advantages such as advanced technology, easy operation. The

1. Name of the machine: Welding rotator, pipe welding rotator, pipe turning rolls, welding turning rolls, welding roller, tank turning rolls, pipe turning rolls, tube turning rolls, fit up rotator, self-aligned welding rotator, self-aligning welding rotator, self adjustable welding rotator, self aligned roller stand, wheel frame, roller frame for wind tower welding, automatic adjustable welding pipe rotator

Conventional Self Centering Pipe Rotators For Welding , CE & ISO Approved 1. Simple introduction The Rotators are built in capacities from 3ton to 200 ton. According to capacity load, the rotator wheels are of PU or FULL metals, which can ensure the support capacity and maintain working long time. The specifications are as follow: ● Each set includes 01 powered unit and 01 idler unit with electrical control system. ● Schneider/Taian/T-verter inverter ● Siemens/Omron/CHNT

1. Main introduction Welding rotator is a kind of our advanced welding equipment, which is be researched and manufactured absorbing domestic and international advanced equipment. It is mainly used for pipe, containers, boilers, pressure vessels, oil tank and other cylinder’s assembling, burnishing and welding, can use together with column and boom and SAW system to realize inside and outside girth and

1. Main technical parameter Item Content Model HGK600 Load capacity 600t Vessel diameter Φ1500-8000mm Diameter and width of wheel Φ800×360mm Speed of welding rotator linear 6-60m/h Motor power 2×7.5kw 2. Main configuration list No. Item Content Brand 1 Motor power 7.5kw Domestic motor 2 Own made reducer Input speed 1450 Industrial standard 4#reducer Total velocity ratio 1862 Input gear z, m m=6, z