Stainless Steel Tube

Products Description: Stainless Steel Tubes Welded Ferritic U Bend Tube For Feedwater Heater GB/T 30065 Steel Grade/Steel Material: Steel Grade Chemical Composition, % C Mn P S Si Ni Cr Mo Cu N 06Cr11Ti ≤0.08 ≤1.00 ≤0.030 ≤0.020 ≤1.00 ≤0.50 10.50-11.70 - - - 019Cr18MoTi ≤0.025 ≤1.00 ≤0.030 ≤0.020 ≤1.00 ≤0.60 16.00-19.00 0.75-1.50 - ≤0.025 022Cr18Ti ≤0.030 ≤0.75 ≤0.030 ≤0.020 ≤1.00 ≤0.60 16.00-19.00 - - - 022Cr18NbTi ≤0.030 ≤1.00 ≤0.030 ≤0.015 ≤1.00 ≤0.60 17.50-18.50 - - -

GB/T 24590 Enhanced Tubes for Efficient Heat Exchanger 10 20G 12Cr18Ni9 Product Information standard ASTM A554,ASTM A312,ASTM A249,ASTM A790,ASTM A688, ASTM A269,ASTM A268, JIS G3463-2006,ASTM A651, Material Grade TP304/304L TP316/316L TP321 TP310 TP409/409L TP444 TP439 S44660 Duplex 2205 445J2 S31803 S32750 Outer Diameter Φ6mm-Φ153mm Thickness 0.2mm-3mm Length customized Tolerance According to the Standard. Surface inner and outer polished,bright annealing,pickling,2B,BA

TORICH GB/T 14975 Seamless Stainless Steel Tubes For Structure Table 1 The Tolerance of Nominal Outer Diameter and Wall Thickness Unit:mm Hot Roll(Extrusion,Expansion)Steel Tube Cold Drawn(Roll) Steel Tube Diamension Tolerance Diamension Tolerance Ordinary Level PA High Level PC Ordinary Level PA High Level PC Nominal Outer Diameter D ＜76.1 ±1.25%D ±0.60 Nominal Outer Diameter D ＜12.7 ±0.30 ±0.10 76.1~＜139.7 ±0.80 12.7~＜38.1 ±0.30 ±0.15 139.7~＜273.1 ±1.5%D ±1.20 38.1~＜88.9 ±0

GB/T 18704 Stainless Steel pipe Clad Steel Pipe 302 304 12Cr17Mn6Ni5N Application:Municipal facilities, vehicle and boat manufacturing, road and bridge guardrails, architectural decoration, steel structure grids, medical equipment, furniture, general mechanical components size:L--2-12mm WT--0.6-8mm OD:12.7-219mm delivery state:surface unburnished---SNB surface burnished---SB surface polished--SP surface sandblasting--SA Surface Quality:The internal and external surfaces of

Product Name: Welded Stainless Steel Tubes for Mechanical Structure GB/T 12770 QUALITY CONTROL 1~ Incoming Raw Material Inspection 2~ Raw Material Segregation to avoid steel grade mix-up 3~ Heating and Hammering End for Cold Drawing 4~ Cold Drawing and Cold Rolling, on line inspection 5~ Heat Treatment, +A, +SRA, +LC, +N, Q+T 6~ Straightening-Cutting to specified length-Finished Measuring Inspection 7~ Machanical Testing in own labs with Tensile Strength, Yield Strength,

Product Name: GB/T 3089 S30408 S30403 SUS304/316L ASTM 304/316L 1.4404 1.457Uniform WT Thinnest-Wall Seamless Stainless Steel tubes Spec: Material:S30408 S30403 SUS304/316L ASTM 304/316L 1.4404 1.4571 Size Range:OD:10.3-102.6mm WT:0.15-0.6mm General Length:0.8-6m Tolerance: According to the following tables or customers’ request. Offered by us in ample of specifications andgrades, our Thinnest-Wall Seamless Stainless Steel Tubes stands out of all others. We are an eminentManu

TORICH 321 302 310S Stainless Steel Welded Steel Tube for Mechanical Structure GB/T 12770 SPEC: Material:304/304L 316/316L 321 302 310S Size Range:OD:4-1200mm WT:0.3-200mm General Length:2-12m Tolerance: According to the following tables or customers’ request. Table1Tolerance of OD Classification Nominal OD Permissible Tolerance PC PB PA H T ＜25 ±0.20 ±0.15 ±0.10 ≥25~＜40 ±0.30 ±0.25 ±0.20 ≥40~＜63 ±0.50 ±0.30 ±0.25 ≥63~＜90 ±0.60 ±0.50 ±0.40 ≥90~＜159 ±0.80 ±0.65 ±0.50 ≥159~＜300

GB/T 14975 ASTM A 959-09 Seamless Stainless Steel Tubes for Structure 12Crl18Ni9 Application:General structural and machanical structureSize:L--2-12m OD--10-500mm WT--1-20mmGrade of steel:12Crl18Ni9 06Crl19Ni10 022Crl19Ni10 06Crl19Ni10N 06Crl19Ni9NbN 022Crl19Ni10N 06Cr23Ni13Smelting method of steel:Refining molten steel and refining outside furnaceManufacture method of steel tube: Hot rolling (extrusion, expansion) or cold drawing (rolling) seamlessDelivery State:Delivery of

Seamless Steel Tube AISI 904L 18 inch Liquefied Petroleum Gas Welded Stainless Pipe What kind of coiled tubing we can produce? aisi 904l stainless steel pipe unit:mm OD 4.76 WT 0.51 0.71 0.89 1.24 OD 6 WT 1 1.5 OD 6.35 WT 0.51 0.71 0.89 1.24 1.65 OD 7.94 WT 0.71 0.89 1.24 1.65 OD 9.53 WT 0.71 0.89 1.24 1.65 OD 10 WT 1 1.5 2 OD 12 WT 1 1.5 OD 12.7 WT 0.71 0.89 1.24 1.65 OD 14 WT 1 1.5 2 OD 15.88 WT 0.71 0.89 1.24 1.65 2.11 OD 16 WT 1 1.5 2 OD 19.05 WT 1 1.24 1.65 2.11 OD 25.4

GB13296 0Cr18Ni9 Seamless Stainless Steel Tubes for Boiler and Heat Exchanger Application: Boiler and Heat Exchanger Size:WT 1~14mm OD 6-159mm L 4-12m Production Method of Steel:Refining outside the furnace or electric arc furnace slag remelting process Production Method of Steel Tube:Hot rolled(extrusion and expansion)or cold drawn seamless method. Permissible deviation of outside diameter and wall thickness Classification Nominal size Allowable deviation W-H OD ≤140 ±1.25%D

Product Name: GB/T24593 12Cr18Ni9 06Cr18Ni11Ti 304/316Welded austenitic boiler and heat-exchanger Stainless Steel Pipes Size range: O.D.:3-500mm W.T.:0.5-50mm L:2000-12000mm according to customers' actual application and production. Application : For boiler and heat-exchanger Steel Grade: 12Cr18Ni9,06Cr19Ni10,022Cr19Ni10,06Cr25Ni20,022Cr22Ni5Mo3N,019Cr19Mo2NbTi,06Cr13Al Characteristic: Good concentricity Good surface quality Good OD and ID tolerance High Precision Stable

TORICH GB/T 18704 Stainless Steel Clad Pipes For Structural Purposes Clad Pipes: The base material (inlayer) is made of carbon steel strip, coating material (outer layer) is made of stainless steel strip, tightly wrapped continuous welding molding. Material: Q195,Q215,Q235,06Cr19Ni10,12Cr18Ni9,12Cr18Mn9Ni5N,12Cr17MnNi5N. Bending: The bending degree per meter of the composite pipe should be in accordance with the following regulations. a) D＜ 89.0mm, not more than 1.5 mm/m b) D

Product Name:TORICH GB/T14976 ASTM A269 A312 Seamless Stainless Steel pipes for fliuid transport Standard: GB/T14976 ASTM A269 A312 OD: 3-420mm WT: 0.5-50mm Length: 1-12m or according to customers' actual application and production. Application:for fliuid transport Steel Grade:201/202/304 /304L/316/316L321/310s/410/420/430/440/439ect Technology:Cold Rolled Hot Rolled Cold Drawn Characteristic: Good concentricity Good surface quality Good OD and ID tolerance High Precision

GB/T 21832 Austenitic-Ferritic (duplex) Grade Stainless Steel Welded Tubes and Pipes Spec: Material:329J3L 1.4462 Size Range:OD:4-1200mm WT:0.3-200mm General Length:3-12m Tolerance: According to the following tables or customers’ request. Mechanical Property No. Unified digital code Steel Grade Recommended heat treatment system Tensile property Hardness Tensile strength Rm/(N/mm2) Non proportional extension strength Rp0.2/(N/mm2) Elongation HBW HRC ≥ ≤ 1 S21953 022Cr19Ni5Mo3S

TORICH GB/T 14975 Seamless Stainless Steel Tubes For Structure Hot Roll Standard: GB/T 14975, ASTM A269 / A269M, ASTM A511 / A511 M Material: 12Cr18Ni9, 06Cr19Ni10, 022Cr19Ni10, 06Cr19Ni10N, 06Cr19Ni9NbN, 022Cr19Ni10N, 06Cr23Ni13, 06Cr25Ni20, 015Cr20Ni18Mo6CuN, 06Cr17Ni12Mo2, 022Cr17Ni12Mo2 Bending: The length of the steel tube should not be greater than 0.15% of the total length of the steel tube and no more than 12mm. The bending degree of the steel pipe per meter should

TORICH GB/T 21832 Austenitic-Ferritic(duplex) Grade Stainless Steel Welded Tubes And Pipes Standard: GB/T 21832, ASTM A789M, ASTM A790M, ASTM A928M Material: 022Cr19Ni5Mo3Si2N, 022Cr22Ni5Mo3N, 022Cr23Ni5Mo3N, 022Cr23Ni4MoCuN, 022Cr25Ni6Mo2N, 022Cr25Ni7Mo3WCuN, 03Cr25Ni6Mo3Cu2N, 022Cr25Ni7Mo4N,022Cr25Ni7Mo4WCuN Bending: The bending degree of the steel pipe should not be more than 1.5 mm/m. Out-of-roundness:The out-of-roundness of the steel pipe should not exceed the allowable

Stainless Steel Clad Pipes for Structural Purpose GB/T 18704 Spec: Material:TP304 , 304 Size Range:OD:4-1200mm WT:0.3-200mm General Length:1-8m Tolerance: According to the following tables or customers’ request. Tolerance of OD Surface delivery condition Nominal outside diameter Tolerance Polishing,Polish (SB,SP) ≤25 ±0.25 ＞25~40 ±0.30 ＞40~50 ±0.35 ＞50~60 ±0.40 ＞60~70 ±0.50 ＞70~80 ±0.60 ＞80 ±1％D Unpolished,Sand blasting(SNB,SS) ≤25 ±0.30 ＞25~50 ±0.40 ＞50 ±1.0％D Tolerance of

Seamless Stainless Steel Pipes for Fluid Transportation GB/T 14976 Spec: Material: Size Range:OD:4-1200mm WT:0.3-200mm General Length:1-12m Tolerance: According to the following tables or customers’ request. Table 1 The Tolerance of Outer Diameter and Wall Thickness Unit:mm Hot rolling(extrusion,expansion) steel tube Cold drawn(rolling)steel tube Diamension Tolerance Diamension Tolerance Ordinary Grade PA High Grade PC Ordinary Grade PA High Grade PC Nominal Outer Diameter D

Seamless Stainless Steel Tubes for Boiler and Heat Exchanger GB/T 13296 Spec: Material:302 Size Range:OD:6-159mm WT:1-14mm General Length:3-12m Tolerance: According to the following tables or customers’ request. Permissible deviation of outside diameter and wall thickness Classification Nominal size Allowable deviation W-H OD ≤140 ±1.25%D ＞140 ±1%D S ≤3 -40%S ＞3~4 -35%S ＞4~5 -33%S ＞5 -28%S W-C OD 6~30 +0.15 -0.20 ＞30~50 ±0.30 ＞50 ±0.75%D S D≤38 +20%S D＞38 -22%S Steel grade

Seamless Stainless Steel Tubes for Structural GB/T 14975 ASTM A269 Spec: Material:302,304,304L,316,316L Size Range:OD:4-1200mm WT:0.3-200mm General Length:1-12m Tolerance: According to the following tables or customers’ request. Table 1 The Tolerance of Nominal Outer Diameter and Wall Thickness Unit:mm Hot Roll(Extrusion,Expansion)Steel Tube Cold Drawn(Roll) Steel Tube Diamension Tolerance Diamension Tolerance Ordinary Level PA High Level PC Ordinary Level PA High Level PC