Nickel Alloy Tube

Inconel Steel Tube with alloy steel grade Inconel 600 Inconel 600 is use in manufacture of aircraft engine parts,aerospace structural components and chemical equipment. Inconel Tube Characteristic:nickel-chromium-iron-based solid solution strengthened alloy. Good high temperature corrosion Oxidation resistance Excellent hot and cold processing Welding performace In the following 700℃ hace a satisfactory heat resistance and high plasticity. Inconel Tube Use in chemical

ASTM A358/A358M Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service Grade: 316L, 317, 317L, 321, 321H, 348 S32050, N08800. Welding: The joints are full penetration bouble-welded or single-welded Heat treatment: All pipes are with heat treatment condition. Please specify your heat treatment requirement in the enquiry. Permissible Variations—The dimensions at any point in a length of pipe shall not exceed the following: Outside

ASTM B163 Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes Steel tubes for Heat Exchangers and Condensors Applications: Steel tubes for Heat Exchangers and Condensors Size range: O.D.:6-127mm W.T.:1-30mm L: according to Customer requirement U- Tubes available "Nickel UNS N02200, Low-carbon Nickel UNS N02201, Nickel-copper alloy UNS N04400 (Monel400,Nicu30Fe), Nickel-chromium-iron alloy UNS N06600 (Inconel600), Nickel-chromium-iron alloy UNS N06601, Nickel

ASTM B444 Nickel-Chromium-Molybdenum-Columbium Alloys( UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube Grade: UNS N06625, UNS N06852, UNS N06219 Type: Cold-worked seamless pipe and tube Mechanical Properties and Tests: Tension Test Hydrostatic or Non-destructive test Chemical Analysis Grade: TP304 TP304L TP304LN TP316 TP316L TP316LN TP316LN TPXM-29 TP304N UNS S30400 S30403 S30453 S31600 S31603 S31653 S31653 S24000 S30451 C,

ASTM B167 Nickel-Chromium-Iron Alloys Stainless Tubing , Stainless Steel Tube Stainless Tubing ASTM B167 Nickel-Chromium-Iron Alloys(UNS N06600, N06601,N06690,N06025 and N06045) Seamless Pipe and Tube ASTM B167 Nickel-Chromium-Iron Alloys(UNS N06600, N06601,N06690,N06025 and N06045) Seamless Pipe and Tube In cold-worked annealed, hot-worked annealed, and hot finished seamless pipes and tube for general corrosion resistant and heat resistant application Applications: Steel

ASTM B444 Nickel-Chromium-Molybdenum-Columbium Alloys( UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube Grade: TP304 TP304L TP304LN TP316 TP316L TP316LN TP316LN TPXM-29 TP304N UNS S30400 S30403 S30453 S31600 S31603 S31653 S31653 S24000 S30451 C, max 0.08 0.035 0.035 0.080 0.035 0.035 Mn, max 2.00 2.00 2.00 2.00 2.00 2.00 P, max 0.045 0.045 0.045 0.045 0.045 0.045 S, max 0.030 0.030 0.030 0.030 0.030 0.030 Si, max 1.00 1.00 1

ASTM B163 Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes Steel tubes for Heat Exchangers and Condensors Applications: Steel tubes for Heat Exchangers and Condensors Size range: O.D.:6-127mm W.T.:1-30mm L: according to Customer requirement U- Tubes available Nickel UNS N02200, Low-carbon Nickel UNS N02201, Nickel-copper alloy UNS N04400 (Monel400,Nicu30Fe), Nickel-chromium-iron alloy UNS N06600 (Inconel600), Nickel-chromium-iron alloy UNS N06601, Nickel

A358/A358M Austenitic Chromium-Nickel Alloy Stainless Steel Pipe for High Temperature ASTM A358/A358M Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service Grade: 316L, 317, 317L, 321, 321H, 348 S32050, N08800. Welding: The joints are full penetration bouble-welded or single-welded Heat treatment: All pipes are with heat treatment condition. Please specify your heat treatment requirement in the enquiry. Permissible Variations—The

Seamless, Cold-worked or Hot-finished pipe and tube intended for general corrosive service. Steel Grade: UNS N08904,UNS N08925,and UNS N08926 Materials and Manufacture: The material is supplied in the solution-treated condition Tests: Chemical Analysis - One test per lot Machanical Properties - One test per lot Non-destructive Test - Each Piece in each lot Average Diameter: The average if the maximum and minimum outside diameters as determined at any one cross section of the

Torich International Co.,Ltd is specialized in manufacturing and suppying JIS G 3460 Carbon and Nickel Steel Pipe for low temperature service JIS G 3460 Steel Tube Size range: OD: 5-420mm WT: 0.5-50mm Length: Upon request JIS G 3460 Nickel Steel Pipe Application: for low temperature service JIS G 3460 Nickel Steel Tube Shipment: FCL, LCL workable. Bulk Vessel workable By Air, By Sea, by Courier CHEMICAL COMPOSITION % max Steel grade C Si Mn P S Ni STPL 380 0.25 0.35 1.35 0

ASTM B161 Nickel Seamless Pipe and Tubes for Heat Exchangers and Condensors Small-Diameter and Light-Wall Tube Applications: Steel tubes for Heat Exchangers and Condensors Size range: O.D.:6-127mm W.T.:1-30mm L: according to Customer requirement Grade: UNS N02200, UNS N02201 Production: Cold worked, Hot worked TABLE 2 Chemical Requirements Chemical Compostion Composition, % Element Nicel (UNS N02200) Low-Carbon Nickel (UNS N02201) Ni,A min 99.00 99.00 Cu 0.25 0.25 Fe 0.40 0

Nickel Seamless Pipe and Tube Steel tubes for Heat Exchangers and Condensors Size range: O.D.:6-127mm W.T.:1-30mm L: according to Customer requirement TABLE 2 Chemical Requirements Chemical Compostion Composition, % Element Nicel (UNS N02200) Low-Carbon Nickel (UNS N02201) Ni,A min 99.00 99.00 Cu 0.25 0.25 Fe 0.40 0.40 Mn, max 0.35 0.35 C,max 0.15 -- C,max -- 0.02 Si,max 0.35 0.35 S,max 0.01 0.01 Applications: Steel tubes for Heat Exchangers and Condensors

ASTM A688 Welded Austenitic Stainless Steel Feedwarter Heater Tubes Size range: O.D.: 4.0-230mm W.T.:1-30mm L: according to customer requirement Mechanical Requirement Grade: TP304 TP304L TP304LN TP316 TP316L TP316LN TP316LN TPXM-29 TP304N UNS S30400 S30403 S30453 S31600 S31603 S31653 S31653 S24000 S30451 C, max 0.08 0.035 0.035 0.080 0.035 0.035 0.035 0.08 0.080 Mn, max 2.00 2.00 2.00 2.00 2.00 2.00 2.00 11.5-14.5 2.00 P, max 0.045 0.045 0.045 0.045 0.045 0.045 0.045 0.060 0

Incoloy 840 Nickel Based Seamless Pipe For For Low Temperature Environment Incoloy 840 is an austenitic nickel-chromium-iron alloy specially formulated for both high-temperature corrosion resistance and excellent low-temperature toughness, making it ideal for seamless pipe applications down to cryogenic conditions. Typical pipe sizes range from ½" to 24" OD with wall thicknesses from 0.035" to 0.5", supplied per major international standards. Below are detailed specifications

Inconel 800 Tube Nickel-based Alloy Seamless Pipe For Condenser And Heat Exchanger Material Inconel 800 is a nickel-iron-chromium alloy known for its excellent resistance to oxidation, carburization and high temperature corrosion. This material combines strength with excellent thermal stability, making it an ideal material for seamless tubes for condensers and heat exchangers. Specification Product Type: Steel pipe, nickel-based alloy steel pipe, seamless pipe Size: OEM For

Inconel 601 Inconel Seamless Pipes Nickel Alloy Seamless Pipe For General Requirements Inconel 601 is a nickel-chromium alloy with remarkable resistance to high temperatures and oxidation. Its seamless pipes are integral in various industries due to their superior durability and strength under challenging conditions. This article delves into the various aspects of Inconel 601 seamless pipes, covering its material specifications, key features, chemical composition, mechanical

ASTM B626 Nickel-Cobalt Alloy Tube For Industry Material Specification ASTM B626 covers welded nickel and nickel-cobalt alloy tubes intended for general corrosion-resisting and low- or high-temperature service. The specification includes several UNS designations, each representing a unique alloy with distinct properties suitable for various industrial applications. Key Features Corrosion Resistance: These alloys offer excellent resistance to a wide range of corrosive

ASTM B637 UNS N07080, UNS N07022, UNS N07208, UNS N07252, UNS N07001: Precipitation-Hardening and Cold Worked Nickel Alloy Tube for High Temperature Service Material Specification ASTM B637 is a specification that covers precipitation-hardening and cold worked nickel alloy tubes designed for high-temperature service. These alloys are known for their exceptional strength, corrosion resistance, and ability to withstand extreme temperatures, making them ideal for demanding

GB/T 14992 GH4169 GH4133 GH3030 GH3039 GH3044 Nickel-Based Alloy Seamless Pipe for High Temperature Material Nickel-based alloys are renowned for their exceptional performance in high-temperature environments. These alloys, such as GH4169, GH4133, GH3030, GH3039, and GH3044, are specifically designed to withstand extreme conditions, making them ideal for seamless pipes used in high-temperature applications. Specification Nickel-based alloy seamless pipes are manufactured

ASTM B983 UNS NO7022, UNS NO7725, UNS NO7740, UNS NO9945, UNS NO9925 Incoloy 925 Nickel Alloy Pipe Cold Worked Seamless Nickel Alloy Pipe and Tube Nickel alloys are essential in various industries due to their exceptional resistance to corrosion, high-temperature strength, and versatility. Among these, the ASTM B983 specification covers several nickel alloy grades, including UNS NO7022, UNS NO7725, UNS NO7740, UNS NO9945, and UNS NO9925. These alloys are particularly noted