Integrated Circuit Components

32Kbit I2C EEPROM with 400kHz speed, 1M write cycles, and 2.5-5.5V range. Features low power, 64-byte page write, and industrial temp range. RoHS compliant, compact SOIC-8 package. Ideal for industrial and automotive applications.

STM8S103K3T6C 8-bit MCU with 8KB Flash, 1KB RAM, 16MHz core, 10-bit ADC, 4 timers, UART/SPI/I2C. Wide 2.95V-5.5V range. 20-pin TSSOP. High robustness, integrated EEPROM, and low-power modes. Ideal for cost-sensitive embedded control.

Ultra-low noise 2.5V series voltage reference with ±0.4% initial accuracy and 25ppm/°C drift. Features 30mA output, 45µA supply current, and wide -40°C to +85°C range. Ideal for ADCs, portable instruments, and smart sensors. Available in 8-SOIC package. RoHS compliant.

High noise immunity dual D flip-flop with set/reset, operating from 3V to 18V. Ideal for industrial control, automotive, and signal processing. AEC-Q100 qualified, Pb-free, RoHS compliant. Pin-for-pin replacement for CD4013B.

High-performance 200V 46A MOSFET with ultra-low 36mΩ on-resistance and fast switching. 100% avalanche tested, TO-220 package. Ideal for DC-DC converters and motor drives. RoHS compliant.

High voltage 600V MOSFET/IGBT driver with 2A peak output, 100ns switching, UVLO, and CMOS/LSTTL inputs. Ideal for motor drives and inverters. 100% original, ROHS compliant, fast delivery.

High-voltage half-bridge driver rated for 600V bootstrap operation. Features 200mA peak output, UVLO, matched propagation delay, and 3.3V/5V/15V logic compatibility. Ideal for motor drives and inverters. Available in SOIC-8 package. 100% original, ROHS compliant.

Compliant with Bluetooth 4.2 and global standards. Features 16MHz ARM Cortex-M0, 32kB OTP, 42kB SRAM, integrated DC-DC converter, and -93dBm sensitivity. Ideal for ultra-low power IoT designs with long battery life and secure multi-protocol support.

High-precision 16-bit Sigma-Delta ADC with 2 differential inputs, programmable gain, and low power consumption. Ideal for industrial process control, medical devices, and smart instrumentation. Supports SPI interface and operates from 2.7V to 5.25V. ROHS compliant.

High-performance Super Barrier Rectifier with ultra-low forward voltage drop (550mV at 5A) and fast switching. Ideal for switching power supplies and DC-DC converters. RoHS compliant, 150°C junction temperature, and surface mount TO-252 package for reliable industrial use.

RS-232 transceiver with ±15kV ESD protection, wide 3.0-5.5V supply, and low 1μA shutdown current. Supports 250kbps data rate with 2 drivers and 2 receivers in DIP-16 package. Ideal for battery-powered and industrial communication equipment.

High-reliability optocoupler with 3750Vrms isolation and 50mA output. Features ultra-low 200mV saturation, wide -55°C to +110°C range, and RoHS compliance. Ideal for industrial controllers and signal transmission.

Infineon HEXFET N-channel MOSFET with 55V drain-source voltage and 42A continuous drain current. Features ultra-low 27mOhm on-resistance, fast switching, and 175°C operating temperature. Ideal for motor drives, power conversion, and automotive electronics. Lead-free and fully avalanche rated.

600V CoolMOS P7 MOSFET with ultra-low switching and conduction losses. Features 360mOhm RDS(on), 11A current, robust ESD protection >2kV, and excellent commutation ruggedness. Ideal for SMPS, PFC, and industrial power supplies. Qualified to JEDEC standard.

High-speed 2-channel digital isolator with 2.5kV isolation, 150Mbps data rate, and low power consumption. Features 15kV/μs CMTI, wide supply range 3V-5.5V, and operates from -40°C to +105°C. RoHS compliant, ideal for SPI, RS-232/422/485 isolation, and automotive applications.

1N5819 Schottky diode rated 1A/40V with low forward voltage drop (0.55V at 1A). Features ultra-fast switching, negligible losses, and wide -65°C to +125°C range. Ideal for polarity protection, DC-DC converters, and freewheeling in industrial and automotive applications. RoHS compliant.

High-performance 8-bit MCU with 20MHz RISC CPU, 3.5KB Flash, 256B EEPROM, and 12-channel 10-bit ADC. Features low power consumption, wide voltage range, and industrial temperature rating. Ideal for embedded control applications. 100% original, ROHS compliant.

Ultra-low on-resistance (0.6Ω) SPDT analog switch for portable and IoT devices. Supports 1.8V-5.5V wide voltage range, high-speed switching, and robust ESD protection. Compact SOT-23 package saves board space. RoHS compliant and lead-free.

IEEE 802.3af compliant PD controller with 100V integrated DMOS, 420mA current limit, and thermal protection. Ideal for VoIP, security cameras, and remote power. 100% new and original, ROHS certified, fast delivery.

High-efficiency step-down regulator with 60V 5A output, wide 3.8-55V input, up to 2MHz switching frequency, and 95% efficiency. Features overcurrent protection, thermal shutdown, and compact DFN package. Ideal for automotive and industrial power systems.