Integrated Circuit Components

Ultra-low drift 1.5ppm/°C max, 0.5ppmP-P noise, wide 5.5V-40V supply. Sources/sinks 10mA with reverse protection. Ideal for high-end industrial, automotive, and medical applications. Available in MSOP-8 package.

High-efficiency N-Channel MOSFET rated at 55V and 24A with ultra-low 0.028Ω on-resistance. Features fast switching, 100% avalanche tested, and compact DPAK package. Lead-free and RoHS compliant, ideal for motor drives, DC/DC converters, and power management.

Dual P-channel MOSFET in SOIC-8 package. 55V drain-source voltage, 6.5A continuous current, ultra-low 50mΩ on-resistance. Features fast switching, low gate charge, and ESD protection. Ideal for DC-DC converters, synchronous rectification, and battery management. Lead-free and RoHS compliant.

Industrial-grade N-channel MOSFET with 40V/162A rating and ultra-low 1.7mΩ RDS(on). Features fast switching, 175°C operation, and 100% avalanche tested. Ideal for high-current power switching, DC-DC converters, and motor drives. Lead-free and RoHS compliant.

High voltage 600V bootstrap driver with 1.9A peak output, fast 40ns rise time, and UVLO protection. Compatible with 3.3V logic, drives IGBTs and MOSFETs. Ideal for BLDC motors, inverters, and industrial automation. ROHS compliant.

High-voltage half-bridge driver rated to 600V with 210mA source and 360mA sink output. Features UVLO, cross-conduction prevention, and matched propagation delay. Ideal for motor drives, inverters, and SMPS. Available in robust SOIC-8 package.

High-performance 128Mb SPI NOR Flash with 104MHz clock, 100K erase cycles, and 20-year data retention. Supports Quad I/O and DDR read commands. Ideal for embedded applications requiring fast code execution and data storage. Industrial temp range -40°C to +85°C.

High-density DMOS technology ensures ultra-low on-resistance and fast switching. Ideal for portable electronics, battery protection, and low-power DC-DC conversion. Supports 1.6A continuous current, 1.8V logic level, and operates from -55°C to +150°C. RoHS compliant.

High-speed dual noninverting MOSFET driver with 1.5A peak output, 36ns rise/32ns fall times. CMOS/LSTTL compatible inputs with hysteresis. Undervoltage lockout prevents erratic operation. Ideal for switching power supplies, DC-DC converters, and motor controllers. RoHS compliant.

Quad voltage monitor with I2C interface, adjustable thresholds down to 0.5V, and 1.5% accuracy. Features independent open-drain outputs, enable inputs, and 140ms reset timeout. Ideal for multivoltage systems, servers, and telecom equipment. Fully specified from -40°C to +125°C in a compact 4x4mm TQFN package.

Integrated supervisory circuit with precision 4.65V threshold, 200ms reset pulse, and watchdog timer. Improves system reliability, reduces board space. Ideal for computers, controllers, and critical μP power monitoring. RoHS compliant, -40°C to +85°C.

The LT3092EST is a programmable 2-terminal current source delivering up to 200mA with 1% initial accuracy. It requires no input/output capacitors, offers reverse-voltage and reverse-current protection, and operates from 1.2V to 40V. Ideal for intrinsic safety circuits and precision current limiting.

High performance LDO with 0.8µV RMS noise and 76dB PSRR at 1MHz. Output current up to 200mA, input range 1.8-20V. Features programmable current limit, power good, and reverse protection. Ideal for RF, medical, and precision instrumentation. Available in 3mm×3mm DFN-8 package.

The L7912CD2T-TR is a -12V fixed output voltage regulator from STMicroelectronics, delivering up to 1.5A with thermal and short-circuit protection. Housed in a TO-263 (D2PAK) package, it features a wide -35V input range and low dropout. Ideal for split power supplies, it offers reliable on-card regulation. 100% original, ROHS compliant.

High isolation GaAs pHEMT SPDT switch for 4G/WiMAX infrastructure. 0.8dB insertion loss, +52dBm IIP3, single positive control. Non-reflective, ESD protected in compact 4x4mm QFN package.

High dynamic range dual DAC with 14-bit resolution and 2.5 GSPS sample rate. Features low noise, excellent SFDR, and flexible clocking. Ideal for wireless infrastructure and instrumentation. Industrial temp range. Pb-free 72-pin LFCSP.

High-efficiency 30V N-Channel MOSFET with ultra-low 9.5mOhm Rds(on) for reduced power loss. Supports 60A continuous current and logic-level drive. AEC-Q101 qualified for automotive reliability. Ideal for DC-DC converters, motor drives, and power management.

High-efficiency monolithic TEC controller with integrated MOSFETs, zero-drift amplifiers, and I2C interface. Supports NTC/RTD sensors, programmable current/voltage limits, and 2.0 MHz PWM. AEC-Q100 qualified. Ideal for optical modules and precision temperature control.

High-performance 2A LDO with 5μV RMS noise and 75dB PSRR at 1MHz. Input range 2.3V to 6.5V, low dropout of 172mV at 2A. Ideal for noise-sensitive ADC, PLL, and precision amplifier circuits. Available in compact 3x3mm LFCSP package. 100% new and original, ROHS compliant.

High-performance 500mA LDO regulator with ultra-low 5μV RMS noise and 60dB PSRR at 100kHz. Ideal for noise-sensitive ADC, PLL, and precision amplifier circuits. Features fast transient response, low dropout, and AEC-Q100 qualification. Available in compact 3x3mm LFCSP package.